"wiremold"

Service Box Fitting, Type: 20 Amp, 125 Volt Duplex Receptacle (One Side), Metallic

Category: Recessed Floor Box Service Fittings

Cover for Poke-Thru/Finish Flange and Conduit Adapter Assembly, RC7 Series, Plugs: (1) 3/4", (2) 1/2", Painted Black, For Use with Carpet, Wood and Tile Flooring.

Category: Poke-Through Cover Assemblies

W-mold Wsc42-6 6 Gand Box W/d ividers

Category: Work Surface Power Centers

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Black

Category: Assembled Poke-Through Units

Steel, 1-Gang, Single Channel Decorate Device Plate, DS4000 Series. Size: 6" Length. Fog White. For 15A or 20A Duplex receptacles, or 106 style Data Frames.

Category: 1-Gang Raceway Box Covers & Faceplates

Non-Metallic, 1-Piece Raceway, PN03 Series, Size: 8' Length, 13/16" Width, 1/2" Height, PVC, White

Category: 1-Piece Non-Metallic Raceway

Steel, Adapter Fitting, 1500 Series. Size: 2-15/16" Height. For use with: V200, V500, V700. Ivory.

Category: Metallic Overfloor Raceway Connectors & Adapters

Non-Metallic, 2-Gang, Deep Divided Box, 2300 Series. Size: 4-7/8" Length, 4-3/4" Depth, 2-1/4" Width. PVC, Ivory.

Category: 2-Gang Raceway Device Boxes

5-1/2" Round Cover, Metallic, Diameter: 5-1/2 Inch, (2) 1-1/2 Inch Screw Plugs, Furnished With Gaskets and (3) Screws, Brass

Category: Round Recessed Box Covers

Kit comes complete with (1) prewired 20A duplex receptacle, (receptacle can be wired as a standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters and adapter to accept AVIP or Extron Electronics MAAP devices. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

WIREMOLD ALA-ABRT

Category: Large 2-Piece Metallic Raceway Cover Plates

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Gray

Category: Assembled Poke-Through Units

3-Compartment Combination Box, Metallic, Depth: 5", Length: 8-3/4", Width: 6-3/4". Raised Floorbox, Series AF, Color: Brown Carpet Cover & Trim.

Category: Recessed Compartment Boxes

Non-Metallic, Device Bracket, 40N2 / 60N2 Series. Size: 5-1/4" Length, 2-3/16" Width. For use with Ortronics TracJack Individual Jack System, Ortronics Series II Front-Loading Module System, and Wiremold Open System Communications Modules. Color: Ivory.

Category: 2-Piece Non-Metallic Raceway Covers

Cast Iron Floor box, Knoutouts: (2) 1/2 in, (2) 3/4 in, Adjustment: 2 in (PrePour), 1/2 in (PostPour), Cubic Inch: 24.7 in

Category: Recessed Adjustable Floor Boxes

WMD XPP2G30CD-BK

Category: Assembled Poke-Through Units

Aluminum housing and base 9 1/4'' x 4 1/2'' x 2 1/2'' (235mm x 114mm x 64mm) are provided with four (4) 1'' trade size knockouts in base for hardwiring unit and two dividers which allow units to be divided on either the ''X'' or ''Y'' axis/plane. Accommodates a variety of power (NEMA or decorator), and supports Ortronics and Wiremold Open Systems connectivity. Portals are field configurable by ordering the corresponding faceplates

Category: Recessed Compartment Box Covers

The new Wiremold Metal Raceway Laser Level simplifies and streamlines the process of installing 500 and 700 Series Raceway. The Laser Level provides perfect visual alignment for runs of metal raceway. Speed up your raceway installation projects and get off the job faster with the new Metal Raceway Laser Level. Finish - Red

Category: Laser Levels

Assembled unit. Prewired 20A duplex receptacle can be wired as a standard duplex receptacle or isolated ground. Finished with a brushed brass flange and a black device plate. Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes two Ortronics TracJack adapters and two Ortronics Series II adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Finish - Brass

Category: Assembled Poke-Through Units

Kit comes complete with adapter ring to secure into the boxes, Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

Rectangular Flange, 3-Gang, Brass

Category: Square / Rectangle Recessed Box Flanges

3' [914mm] length with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] steel housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. Each USB module provides 2 ports with 2.4 Amps of shared charging. Please note the charging load on one module will not affect the charging performance of the other USB modules in the product.

Category: Single Circuit Steel Plugmold

For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with two (2) duplex mounting plates, two (2) communication mounting plates (RFB62A), and (2) blank mounting plates. Other plates sold separately.

Category: Recessed Adjustable Floor Boxes

6' Plugmold Multioutlet System with 6 single outlets. 304 Stainless Steel

Category: Single Circuit Steel Plugmold