Search results

Lugs, Oversized, Neutral or Ground Bar, 10 - 2 AWG AL, 14 - 4 AWG CU, 70 Amp

Category: Load Center Neutral & Ground Bars

Reducing Washer, Steel, 1-1/2" x 1"

Category: Reducing Washers

Circuit Breaker, Miniature, 5 Amp, 1-Pole, 277VAC, 48VDC, Supplementary, Highly Inductive, Trip Curve D

Category: 1-Pole DIN Rail Mount Circuit Breakers

Ground Lug Kit, 600 - 1200 Amp, 600 Volt AC, 3 x 2 AWG - 250 MCM, Cu/Al

Category: Load Center Neutral & Ground Bars

2-Gang, 1-Toggle 1-Decora/GFCI Device Combination Wallplate, Standard Size, Thermoplastic Nylon, Device Mount - Ivory.

Category: Toggle Switch / Decorator-GFCI Combination Wallplates

4.5" Non-Metallic Round Box with Plugs, Low Voltage Divider and Mud Cover

Category: Round Recessed Floor Boxes

1-Piece Conduit Support, Channel Mount, Steel, 1 IN H x 1 IN L x 1 IN W, Box Depth 2.13 IN

Category: Conduit to Stud Supports

IN-SURE LEVER WIRE CONN MODEL L33 3-PORT 75/BX

Category: 2-Port Push-In Wire Connectors

Universal Drain/Breather, 1/2 Inch, Explosion-Proof/Dust-Ignitionproof, Stainless Steel

Category: Explosion-Proof Universal Drains / Breathers

Liquidtight Connector, 90 Degree, 3/4 Inch Diameter, Steel with Zinc Chromate Finish, Includes Sealing Washer

Category: 90 Degree Steel Liquidtight Flex Connectors

Oil-Tight Hole Seal, For 3/4 Inch Conduit Holes, Painted Steel

Category: Painted Steel Enclosure Hole Seals

Conduit Hanger With Bolt and Nut, 1 Inch Diameter, Steel With Zinc Finish, For Use With Rigid/EMT Conduit

Category: Conduit Clamps

Eaton Crouse-Hinds series Condulet Series 5 conduit outlet body, Rigid/IMC, Copper-free aluminum, LB shape, Body, traditional cover and gasket, 1"

Category: Type LB Aluminum Conduit Bodies

Breaker, Molded Case, 15 Amp, 3-Pole, 600Y/347 Volt AC, G Frame, 25 kAIC

Category: 480V Rated Molded Case Circuit Breakers

Terminal Block, 25 Amp, 600 Volt AC/DC, Red, 2.5 mm, Feed Through, 100 in a Package

Category: 2.5mm Feed Through & Ground Terminal Blocks

Auxiliary Contact Block, Side Mount, 1 Normally Closed, without Sequence Terminal Designation

Category: Starter & Contactor Auxiliary Contacts

UF Direct Burial Splice Kit, 14-8 AWG, Heavy Wall Heat Shrink Sleeve, Aluminum

Category: Direct Burial Datacom Splice Kits

Impact Driver Bit Set With Proflex Torsional Recoil System Features Energy Absorbing Technology To Extend The Life Of The Bit, S2 Impact-Rated Steel Bits Built For Heavy-Duty Applications, Extended Length 3.5-Inch #2 Phillips And #2 Square Bits To Easily Access Hard To Reach Fasteners, Compact, Modular Storage System Is Compatible With Modbox™ And Stackable With Other Cases Of Similar Design, Set Includes 3-Inch Bit Extension With Strong Magnet To Keep Bits In Place, Variety Of Phillips, Slotted, Square And Torx® Bits To Drive The Most Common Fasteners On The Job, 1/4-Inch And 5/16-Inch Magnetic Power Nut Drivers

Category: Drill / Power / Insert Bit Kits

15 Amp, 2-Pole, Type CH Arc Fault Circuit Breaker, Pigtail Mount, 10 kAIC, 120 VAC and 120/240 VAC, Combination AFCI, Pigtail Neutral

Category: Residential Arc Fault Circuit Breakers

For closing open end of 6000 Series Raceway. Gray

Category: Large 2-Piece Metallic Raceway End Fittings

Deep Strut - Round Holes on Back & Side, Height: 1-1/2", Width: 1-1/2", Material: Steel, Finish: Electro-Galvanized, Gauge: 12, Length: 10 feet. Color: Gold.

Category: Steel Strut with Holes

Compression Lug with Sight Hole, 4 AWG, 1-Hole Stud, Stud Diameter 1/4 Inch, Color Code Gray, Die Code 29, Copper With Tin Plating

Category: 1-Hole Copper Compression Lugs

CARFLEX, 2 Inch Diameter, Liquidtight, Non-Metallic, UL Listed for Outdoor Use & Sunlight Resistant, Gray. 100 Foot Reel.

Category: Liquidtight Flexible Non-Metallic Conduit

1 AWG THHN/THWN-2 Stranded Aluminum, Black, Cut to Length

Category: 1 AWG Stranded Aluminum THHN