"3-40248-45"

Eaton Crouse-Hinds series Condulet Form 7 conduit outlet body, Copper-free aluminum, LB shape, 3/4"

Category: Type LB Aluminum Conduit Bodies

Conduit Body Cover, Type: Screw-On, Duraloy 5, Size: 3/4 Inch, Material: Stamped Aluminum, For Use With Rigid/IMC Conduit

Category: Aluminum Conduit Body Covers

Nipples, 3/4 x 2 Inch, Schedule 40, Steel/Galvanized, Meets or Exceeds All Applicable ASTM & ANSI Standards and Lead Free.

Category: Welded Plumbing Pipe Nipples

Dimmer Switch/Slider, Single Pole, 3-Way, 120/277 VAC, 0-10V Dimmer, Almond, White, Ivory

Category: Incandescent Slide Dimmers

Weatherproof Cover, Round, (1) 3/4 Inch Threaded Outlet, 4 Inch Diameter, Aluminum Die Cast, White

Category: Round Metallic Weatherproof Box Covers

Elbow, 90 Degree, Type: Long Radius C x C - WROT, Size: 3 Inch, Material: Copper

Category: 90 Degree Plumbing Pipe Elbows

EYS Sealing Fitting, Male/Female, Vertical or Horizontal, Diameter 3/4 Inch, PVC Coated Ferrous Metal

Category: PVC Coated Type EYS Sealing Fittings

Conduit Hub with Ground Screw, Size: 3/4 inch, Material: PVC Coated Steel, Dimension A (Inches): 1.47 Dimension B (Inches): 2.25 Dimension C (Inches): 0.91 Max Wall Thickness (Inches): .19 Nominal Weight (Pounds): 0.3

Category: PVC Coated Conduit Hubs with Ground

2P-120V-45A CB

Category: 2-Pole 120/240V Bolt-On Circuit Breakers

Low Profile Mounting Brackets for 0, 30, 45, 60 or 90 degrees with mounting bracket and mounting hardware.

Category: Media Center Mounting Brackets

Power-Stud® Wedge Expansion Anchor, 3/8 x 7 Inch, Zinc Plated Carbon Steel

Category: Hammer-In Wedge Anchors

Starter, Size 3, 90 Amp, 600 Volt AC, 208 Volt AC Coil, Non-Reversing, Open, 3-Pole, Thermal Overloads

Category: NEMA Size 3 Open Motor Starters

Full Load Amperes Range: 106.00 - 144.00. Heater Pack with Standard Trip - Class 20. For NEMA & IEC Freedom Series 105 & 144 Amp Overload Relays. ***Package of 3***

Category: Heater Elements - Freedom Series Packs

Liquidtight Connector, 90 Degree, 1-1/4 Inch Diameter, Steel With Zinc Finish, Includes Sealing Washer

Category: 90 Degree Steel Liquidtight Flex Connectors

Pulling Tape, Measuring Tape, 3/4 Inch x 3000 Foot Reel, Material: Polypropylene

Category: Pull Rope

Box/Conduit Hanger, 1/2"" - 3/4"" EMT, 1/4" Hole, Pre-Galvanized Steel Hanger/Spring Steel Clamps

Category: Combination Box/Conduit Hangers From Drop Wire/Rod & Beam

Set Screw Connector, Insulated and Concrete Tight, Conduit Size 3 Inches, Length 3.641 Inches, Material Zinc Plated Steel, For use with EMT Conduit

Category: Steel EMT Set Screw Connectors

Feeder Terminal, Bus Bar, 65 Amp, 3-Phase, For Use On MS116/132 Manual Motor Protectors

Category: Manual Motor Protector Busbars

30 General Purpose Amp, 3-Pole, 600V Rated, 250-500 VAC/VDC Coil. AF-Line Series, AF16 Frame, IEC Contactor with (1) N.O. Auxiliary Contact Block.

Category: IEC Contactors - 17-37 Amp

2-1/2" 3-Piece Knock Out Seal, Pre-Galvanized

Category: 3-Piece Knockout Seals

Liquidtight Connector, Straight, 3 Inch Diameter, Zinc Die Cast

Category: Straight Die-Cast Liquidtight Flex Connectors

Service Entrance Cap, Clamp-On, Conduit Size: 3/4". Phenolic Insulator, Weather Resistant, Die Cast Copper Free Aluminum. *Dottie Part #: 40010*

Category: Service Entrance Caps - Metallic

45A, 600VAC, 300VDC, Industrial & Electrical Fuses UL Class RK1 Duel Element Time Lag (Slo-Blow)

Category: Class RK1 Power Fuses

OZ-Gedney Type 24 Center Stopped Straight Squeeze Connector, Size: 2-1/2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 2-45/64 - 2-61/64 IN, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 2-1/16 IN Length

Category: Straight Squeeze Flex Connectors