"P-31652-002"

ILS PDH-11-2/0-2 ALM2/0-142/0

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

ILS LDA-16-500 AL MECH 500-4

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

ILS LDB-112A-350 AL MECH 2X35

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

ILS PDH-14-400-3 AL MEC400-62

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Eaton straight blade plug , #18-10 AWG, 10A, Residential, 125V, Back wire, Brown, Brass, Thermoplastic, 1-15P, Two-pole, two-wire, non grounding, Insulation piercing, 18-2 SPT-1 cord, Thermoplastic, Bulk

Category: 10 Amp Straight Blade Plugs

ILS LDAU-26-350 AL MECH 2X350

Category: Double Primary / Multiple Secondary Non-Insulated Distribution Blocks

ILS PDH-22-350-2 AL MEC350-43

Category: Double Primary / Double Secondary Non-Insulated Distribution Blocks

Angled Plug, 4-Pole 4-Wire 60 Amp Non-Grounding, Yellow

Category: 60 Amp Straight Blade Plugs

MLB UQFP-M-200 2P 200A 12/24

Category: 2-Pole Main Circuit Breakers

Plasti-Bond Sealing Fittings are used in conduit runs to stop gasses, vapors or flames from migrating from one part of the conduit system to another. This limits the spread of any potential explosion, enhancing safety. The PVC and urethane coatings of the fittings protects them from corrosive atmospheres so they can continue to function in hazardous locations. These fittings are available in several different configurations and with optional breathers and drains to accommodate installation in a variety of locations and positions. The EY, EYM, EYD and EYDEF styles of fittings are for installation in vertical conduit runs. The EYA, EYAM and EYSEF style fittings are for installation in either vertical or horizontal runs. The EZS and EZDM style fittings may be used in any angle of conduit run. These Plasti-Bond sealing fittings should be used with a suitable system of sealing compound, such as Chico A, Chico X or Chico A-P from Crouse-Hinds. Follow the installation instructions included with the sealing compound.

Category: PVC Coated Type EYD Sealing Fittings

P & S SS182

Category: 1-Gang Blank Wallplates

P/N 300513 CEILING MOUNT BRACKET for LUH Unit Heaters. The ceiling bracket lets you mount heater directly to ceiling or over-head member, simply and easily. The swivel mounting allows you to readily adjust the direction of warm air flow for maximum comfort up to 180 degrees.

Category: 90° Vertical Inside Cable Tray Bend

CRO E-Z1016-8388

Category: Male Latching Plug Taper Nose Cam Connectors

PAS PS30AC2-HP 30A 277VAC B+S

Category: 30 Amp Specification Grade Toggle Switches

PAS SP7-LA SMOOTH WP 1G SINGL

Category: 1-Gang Single Receptacle Wallplates

Duplex Cover, (2) 1-1/2" Screw Plugs, 2-7/8" x 3-7/8", 1/8" Thick, Brass

Category: Square / Rectangle Recessed Box Covers

CRO E1016-8354 GREEN MALE PLUG

Category: Double Set Screw Single Pole Cam Connectors

Eaton Arrow Hart extra heavy-duty angled plug , #12-4 AWG, 50A, Industrial, 125V, Back wire, Gray, Brass, Nylon, 5-50P, Two-pole, three-wire, grounding, Screw, Nylon, Core pack

Category: 50 Amp Straight Blade Plugs

Triple pole, Four wire, Pin and Sleeve Receptacle. 20 amp, 125/250 volt.

Category: 100 Amp Pin & Sleeve Receptacles

CRO E1016-8362 CAM LOK

Category: Double Set Screw Single Pole Cam Connectors

4 Inch Square Box Cut-In Adapter, Two (2) Integrated Old Work Steel Clips With Screws For Drywall Or Other Wall Materials, Small Footprint Easily Concealed By Life Safety Devices Greater Than 4-7/8” W X 4-3/4” H

Category: 4" Square Metallic Box Mud Rings

"Double pole, Three wire, Pin and Sleeve Connector. 100 amp, 480 volt.

Category: 100 Amp Pin & Sleeve Connectors

P&s 7210 Lkg Sgl Rcpt-NEMA L2 -20r

Category: 20 Amp Non-NEMA Twist Lock Receptacles

Three pole, Four wire, Pin and Sleeve Plug, 20 amp, 3/240VAC.

Category: 20 Amp Pin & Sleeve Plugs