Conduit Bodies - PVC Coated

Plasti-bond Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles,each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90° Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A Mounting Outlet For Wiring Devices Or Lighting Fixtures Etc. Electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type LL Conduit Bodies

Rob-r Prc989 3-1/2 Form 8 C F

Category: PVC Coated Type C Conduit Bodies

Rob-r Prh680f 2 Form 8 Cover

Category: PVC Coated Conduit Body Covers

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduit subject To Longitudinal Movement, Including That Caused In Long Runs By Thermal expansion And Contraction.

Category: PVC Coated Type X Conduit Bodies

Perma-cote Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles, Each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90degree Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A

Category: PVC Coated Type T Conduit Bodies

Conduit Body, Type: LB, FM7, Size: 1 1/4 inch, Material: Aluminum. Includes: Cover & Gasket.

Category: PVC Coated Type LB Conduit Bodies

Conduit Body Cover, Type: FM7, Size: 1/2 inch, Material: PVC Coated Aluminum.

Category: PVC Coated Conduit Body Covers

Rob-r Prbub8 3 Bub Fitting Mo

Category: PVC Coated Type C Conduit Bodies

Conduit Body, Type: C, FM7, Size: 1-1/4 inch, Material: PVC Coated Aluminum. Includes: Cover & Gasket.

Category: PVC Coated Type C Conduit Bodies

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduit subject To Longitudinal Movement, Including That Caused In Long Runs By Thermal expansion And Contraction.

Category: PVC Coated Type X Conduit Bodies

Perma-cote Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles, Each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90degree Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A

Category: PVC Coated Type LB Conduit Bodies

Plasti-Bond LBY type elbows are used as service entrance elbows between service entrance and vertical weatherhead conduit runs, to change direction of a conduit run 90degree when space is limited, and for pull outlets. They are available for general service (Series LBY-50-GS through LBY-150-GS) and hazardous (Series LBY-50 through LBY-55) locations.

Category: PVC Coated Type LB Conduit Bodies

PCP PMLB150 1-1/2 FORM 8 LB FITTING

Category: PVC Coated Type LB Conduit Bodies

RRY PRC39 1 AL MARK 9 C FITTI

Category: PVC Coated Type C Conduit Bodies

ROB PRLR97 3-1/2 FORM 7 LR FITTING

Category: PVC Coated Type LR Conduit Bodies

PVC coated Form 8 conduit bodies with covers are offered in numerous configurations to provide a complete coated conduit system.Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Conduit Body Covers

ROB PRBUB10SA 4 AL BUB FITTING MOGUL

Category: PVC Coated Conduit Body Covers

ROB PR889 2-1/2 - 3 MARK 9 COVER

Category: PVC Coated Conduit Body Covers

Plasti-Bond pulling elbows are used at 90 degree bends in conduit runs to allow straight pulls at bends, to serve as pull outlets for stiff conductors, to allow for service entrance into buildings or to allow conductor entrance into motors. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LR Conduit Bodies

ROB PRTB39 1 AL MARK 9 TB FITTING

Category: PVC Coated Type TB Conduit Bodies

PVC coated Mark 9 conduit bodies covers are offered separately for convenient maintenance or installation when the replacement of entire bodies are not necessary.

Category: PVC Coated Conduit Body Covers

Perma-Cote, Conduit Body And Cover, Form: LB Form 8, Length: 1340 IN, Height: 4.850 IN, Width: 3.790 IN, Material: Ferrous Body, Plastic Encapsulated Stainless Steel Screw, Finish: 40 MIL Gray PVC Exterior Coating, 2 MIL Green Urethane Interior Coating, Pipe Size: 2 IN, Dimension D: 3 IN, Dimension E: 8.560 IN, Includes: Screw

Category: PVC Coated Type LB Conduit Bodies

Perma-cote Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles, Each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90degree Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A

Category: PVC Coated Type LB Conduit Bodies