Boxes - Recessed

Replaced by Hubbell FB4233 - HUB B423341 CAT B4233 W/ 1" KOS

Category: Square Recessed Floor Boxes

1 Device, Rectangular, Fully Adjustable, Stamped Steel, Concrete Floor

Category: Recessed Adjustable Floor Boxes

8IN CORE-PREWIRED-FLUSHWAL 8ATPGY 8IN CORE-PREWIRED-FLUSH

Category: Assembled Poke-Through Units

Floor Box Assembly, Rectangular, 1-Device, Adjustable, (4) 3/4 Inch Hubs, Cast Iron

Category: Recessed Adjustable Floor Boxes

6" Round Cover,Flush, Recessed Evolution 6AT Series,Black6" Round, Poke-Thru Cover Assembly, Evolution Series, Flush, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Black Powder-Coat, For Tile, Carpet, and Wood Flooring. For Use with 6STCP, 6STC, AND 6STCPAV Assemblies.

Category: Poke-Through Cover Assemblies

6IN CORE-PREWIRED-FLUSH AV BLACK6IN CORE-PREWIRED-FLUSH AV BLACK

Category: Assembled Poke-Through Units

8IN CORE-PREWIREDRecessed Prewired Assembly 8ATCPBK With Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 8"" (203mm) diameter cored hole. Devices are recessed 3 1/4"" (83mm) below floor surface. Die-cast aluminum cover assembly Finish: (BS) brass."

Category: Assembled Poke-Through Units

1 Device, Rectangular, Fully Adjustable, Cast Iron, Concrete Floor Box

Category: Recessed Adjustable Floor Boxes

Floor Box Surface Cover With Solid Lid, 6 to 10 Gang, Size: 16-3/8 Inch Length, 12-1/2 Inch Width, For use with: Evolution Series 6, 8, and 10-Gang Floor Boxes, Aluminum, Color: Nickel

Category: Square / Rectangle Recessed Box Covers

Aluminum, Flush Style Cover with Solid Lid, Evolution Series. Size: 16-3/8" Length, 12-1/2" Width. Brass

Category: Square / Rectangle Recessed Box Covers

Aluminum flush style cover assembly with a insert area to allow for a carpet, tile or wood insert. Cover is for use on Evolution Series 6-, 8-, and 10-gang floor boxes. Cover finished bronze (BZ)

Category: Square / Rectangle Recessed Box Covers

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Flush, Material/Finish: Die-Cast Aluminum/Aluminum Powder-Coat.

Category: Poke-Through Cover Assemblies

Poke-Thru Assembly, Diameter: 6", Type: (2) Duplex, MetallicPoke-Thru Device, Recessed, Assembled Unit, Evolution Series, Metallic, Cover Type: Flush, Twist/Slide, Device Type: (2) Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade) & Accepts Extron® Electronics AAP and MAAP Series Devices, Material/Finish: Die-Cast Aluminum/Nickel Powder-Coat, Recessed: 3-1/4". Diameter: 6". Depth: 16-3/4". For Use with Wood, Laminate, & Tile Flooring.

Category: Assembled Poke-Through Units

6IN CORE-UNWIRED-For carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Gray

Category: Assembled Poke-Through Units

Floor Box Cover, Reinforced Non-Metallic Cover, Flange and Cable Doors, Color: Black

Category: Square / Rectangle Recessed Box Covers

6IN CORE-UNWIRED-For carpet, tile, wood and laminate concrete floor coverings. For use in 6" (152mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Brass

Category: Assembled Poke-Through Units

1" trade size barriered conduit. Also includes BX/MC cable connector. Must be activated with 200 Series or 241 Series Service Head and FIFP or FP Series Faceplates (sold separately) to maintain UL Listing and/or Classification. NOTE: This Poke-Thru requires a minimum 2 1/32" (52mm), 2 1/8" (54mm) maximum diameter hole.

Category: Assembled Poke-Through Units

Recessed Prewired Assembly 8ATCPBK With Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 8"" (203mm) diameter cored hole. Devices are recessed 3 1/4"" (83mm) below floor surface. Die-cast aluminum cover assembly Finish: (GY) painted gray."

Category: Assembled Poke-Through Units

BRASS COVER FOR 665 SERIESCover for 665 Series Boxes, Brass, Load Rating 1500 Pounds

Category: Square / Rectangle Recessed Box Covers

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

Recessed Prewired Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Brass

Category: Assembled Poke-Through Units

Floor Box Cover With Carpet Recess, 10 Inch x 10 Inch, Die Cast, Color: Black

Category: Square / Rectangle Recessed Box Covers

Floor Box, 4-Gang, Type: Recessed/Shallow, Includes Cover, Steel

Category: Recessed Adjustable Floor Boxes

Cover Assembly, Round, Diameter: 8", BrassCover Assembly, Round, Diameter: 8 Inch, Brass, Cover Type: Surface, Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Brass Powder-Coat, For Tile, Carpet, Wood and Laminate Flooring.

Category: Poke-Through Cover Assemblies