Search results

Mechanical Cable Lug, 1-Hole, Copper, Single Barrel, 14 - 6 AWG, 3/16" Stud Hole

Category: 1-Conductor Copper Mechanical Lugs

Ring Terminal, High-Temp, 12 - 10 AWG, Stud: #8, Material: Copper, Package of 50 Each.

Category: Non-Insulated Ring Tongues

Two-piece bracket attaches to 3/8" (9.5mm) wide x 1 1/2" (38.1mm) or 3/8" (9.5mm) wide x 2" (50.8mm) ladder rack rail. Bracket halves slide into position and clamp together on the ladder rack rail, which allows for a one-handed assembly of the threaded ro

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

Ring Terminal, Large Wire, 4 AWG, 1/4" Stud Size, Vinyl Expanded Insulation

Category: Vinyl Insulated Ring Tongues

Snap-In Coupler, Mini-Com, TX6A, 10Gig, UTP, Black

Category: Snap-In Cat 6A Jack Inserts

Optional snap-on hinged cover for channel FR12X4BL6. Can be folded down for height restricted areas.

Category: Covers & Retainers

Female Disconnect, 16 - 14 AWG, Tab: 0.187 Inch x 0.020 Inch, Material/Finish: Brass/Tin Plated, Package of 100 Each.

Category: Female Non-Insulated Wire Disconnects

Compression Lug, Copper, 1-Hole, Flex, 3/0 AWG Wire, 5/8" Stud Hole

Category: 1-Hole Copper Compression Lugs

Thin wall heat shrink, .75" (19.0mm) diameter, white cross-linked polyolefin, 5 pc. package quantity.

Category: Thin Wall Heat Shrink

Panduct® type G wide slot wiring duct, 3 W x 3 H, 6' length, PVC, adhesive, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Inside Corner Fitting / LD3, LDPH3 & LDS3 Raceway, Off-White, Non-Metallic, Power Rated to 600 Volts

Category: 1-Piece Non-Metallic Raceway Elbows

Compression Lug, Copper, 1-Hole, 600 kcmil, Narrow Tongue, 3/8 Inch Stud

Category: 1-Hole Copper Compression Lugs

Compression Lug, Copper, 2-Hole, Long Flared Barrel, 600 kcmil Cable, 1/2 Bolt Holes, 1.75 Hole Spacing

Category: 2-Hole Long Barrel Copper Compression Lugs

Outside corner fitting for use with LDPH10 raceway only, Off White, ABS, Length 1.75 in.

Category: 1-Piece Non-Metallic Raceway Elbows

P1 Cassette, Continuous Tape, Polyolefin, .31" W x 25' L, White/Black

Category: Labeling Tape

Panduct® type F narrow slot wiring duct, 2 W x 2 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Wire Marker Card, Vinyl Cloth, '13'

Category: Wire Marker Cards

Fork Terminal, vinyl insulated, funnel entry, 16- 14 AWG, #10 stud size, narrow tongue, bulk package.

Category: Vinyl Insulated Standard Fork Terminals

Compression Lug, Copper, 1-Hole, Long Barrel, #6 AWG Wire, #10 Stud Hole

Category: 1-Hole Long Barrel Copper Compression Lugs

Outside Corner Fitting For Use With LDPH10 Raceway Only, White

Category: 1-Piece Non-Metallic Raceway Elbows

Adhesive backed latching wire clip, .50" (12.7mm) bundle, natural, standard package.

Category: Cable Clamps & Clips

White on black, vinyl tape, 0.50".

Category: Labeling Tape

Tamper resistant two-piece latching surface raceway. Supplied with pre-punched mounting holes and factory applied adhesive tape. Available in 6', 8', and 10' lengths, Electric Ivory, PVC, Length 10.00 ft, Width 1.52 in.

Category: 1-Piece Non-Metallic Raceway

Cable Tie, Nylon, Standard Cross Section, Red, 7.4 Inch Long, .190 Inch Wide, 2" Maximum Bundle Diameter, 50 Pound Minimum Loop Tensile Strength, Pack of 1000

Category: Non-Releasable Cable Ties