Wire Duct Accessories

Slotted Divider Wall, Panduct, 3 Inch High, 6 Foot Long, White

Category: Wall Duct Dividers

Slotted Divider Wall, 4 Inch Nominal Duct Height, Length: 6 Feet, Material: PVC, Color: White.

Category: Wall Duct Dividers

Panduct® solid divider wall, 4.00" nominal duct height, 6' length, PVC, white.

Category: Wall Duct Dividers

Panduct® solid divider wall, 3.00" nominal duct height, 6' length, PVC, white.

Category: Wall Duct Dividers

Panduct® slotted divider wall, 2.00" nominal duct height, 6' length, PVC, white.

Category: Wall Duct Dividers

EMI Noise Shield for 2" High Panduit Wiring Duct, (2) 3' Sections, Clips, Paste

Category: Wall Duct Dividers

The quick mounting clip is used for installing the CWD2 corner wiring duct. It is made of low-carbon steel and spring steel and comes in a package of 16 pieces. The recommended fastener size is #10 – 32 x 1/2" (not included).

Category: Wire Duct Clips / Retainers

The Wyr-Grid® Overhead Cable Tray Side Waterfall is designed to maintain a 3in (76mm) bend radius while transitioning fiber optic, power, and copper data cables from the side of the Wyr-Grid® wire rack down into racks in cables. Waterfalls simply snap on

Category: Wire Duct Clips / Retainers

The black powder coated bracket is 2.41" (61.2 mm) high, 16.5" (419.1 mm) long, 2.04" (51.8 mm) wide, and 16.5" (419.1 mm) deep. It is designed to support a 12" (304.8 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod d

Category: Wire Duct Clips / Retainers

The black powder coated straight splice connector is 1.57" (39.8 mm) high and quickly joins two 8" (203 mm), 12" (305 mm), or 18" (457 mm) wide Wyr-Grid® Pathways together. A thread cutting screw pierces through the paint of adjacent pathway sections to p

Category: Wire Duct Clips / Retainers

The quick mounting clip is used for installing the CWD4 corner wiring duct. It is made of low-carbon steel and spring steel and comes in a package of 16 pieces. The recommended fastener size is #10 – 32 x 1/2" (not included).

Category: Wire Duct Clips / Retainers

The Wyr-Grid® Cantilever Bracket is black powder coated and is used to support the 12" (304.8 mm) Wyr-Grid® Pathway along a wall. It is 6.9" (175.3 mm) high, 14.7" (373.4 mm) long, 2.2" (56.4 mm) wide, and 14.7" (373.4 mm) deep and has an integral retaini

Category: Wire Duct Clips / Retainers

PANTHER INDUSTRIES 3/4IN X 10FT 24GA GALV HANGER IRON COIL

Category: Wire Duct Clips / Retainers

The Wyr-Grid® black powder coated, snap-on sidewall is 4.0" (102 mm) high and can be attached anywhere along the pathway to retain cables. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

The Wyr-Grid® black powder coated, snap-on sidewall is 2.0" (50 mm) high and can be attached anywhere along the pathway to retain cables. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

Snap rivet fastens channel and fittings together for added strength and rigidity. Snap rivet mounts flush to surfaces, White.

Category: Wall Duct Panel Rivets