Wire Duct Clips / Retainers

The Wyr-Grid® Cantilever Bracket is black powder coated and is used to support the 24" (609.6 mm) Wyr-Grid® Pathway along a wall. It is 6.9" (175.3 mm) high, 26.7" (678.2 mm) long, 2.2" (56.4 mm) wide, and 26.7" (678.2 mm) deep and has an integral retaini

Category: Wire Duct Clips / Retainers

Black powder coated Wyr-Grid® 6" (50mm) high Snap-On Intersection Bend Radius Control provides 3" (76mm) bend radius control and can be installed without cutting or fabrication at tees, crosses, and right angle intersections.

Category: Wire Duct Clips / Retainers

The black powder coated bracket is used to support an 18" (457.2 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod drops. The hardware for attaching the bracket to a threaded rod is sold separately. The bracket comes i

Category: Wire Duct Clips / Retainers

The black powder coated bracket is used to support a 24 (609.6 mm) wide Wyr-Grid ® Pathway from the ceiling using a pair of 1/2 (12 mm) threaded rod drops. The hardware for attaching the bracket to a threaded rod is sold separately. The bracket comes in s

Category: Wire Duct Clips / Retainers

The black powder coated wall mount bracket is 2.44" (61.98 mm) high, 11.27" (286.26 mm) long, 3.12" (79.25 mm) wide, and 11.27" (286.26 mm) ddep. It is used to support the end of the 12" (304.8 mm) Wyr-Grid® Pathway against a wall. The mounting hardware f

Category: Wire Duct Clips / Retainers

The electro zinc-plated bracket in silver 2.41" (61.2 mm) high, 33" (838.2 mm) long, 2.04" (51.8 mm) wide, and 33" (838.2 mm) deep. It is designed to support a 30" (762 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod

Category: Wire Duct Clips / Retainers

The Wyr-Grid® electro zinc-plated, snap-on intersection bend radius control in silver is 4.0" (102 mm) high. It provides 3.0" (76 mm) of bend radius control and can be installed without cutting or fabrication at tees, crosses, or right angle intersections

Category: Wire Duct Clips / Retainers

OVERHEAD SIDEWALL 4IN H EZ EA

Category: Wire Duct Clips / Retainers

The flat, pre-galvanized metal liner in gray is 24" (609.6 mm) wide and 63" (1600.2 mm) long. It is used to provide a flat surface for routing cables on the Wyr-Grid® pathway sections. It comes in standard packages of one.

Category: Wire Duct Clips / Retainers

OVERHEAD BRACKET TRAPEZE 18IN EZ EA

Category: Wire Duct Clips / Retainers

The Wyr-Grid® Overhead Cable Tray Side Waterfall is designed to maintain a 3in (76mm) bend radius while transitioning fiber optic, power, and copper data cables from the side of the Wyr-Grid® wire rack down into racks in cables. Waterfalls simply snap on

Category: Wire Duct Clips / Retainers

The Wyr-Grid® Cantilever Bracket is black powder coated and is used to support the 18" (457.2 mm) Wyr-Grid® Pathway along a wall. It is 6.9" (175.3 mm) high, 20.7" (525.8 mm) long, 2.2" (56.4 mm) wide, and 20.7" (525.8 mm) deep and has an integral retaini

Category: Wire Duct Clips / Retainers

The black powder coated trapeze bracket 0.72" (18.3 mm) high, 12.5" (317.5 mm) long, 2.04" (51.8 mm) wide, and 12.5" (317.5 mm) deep. It is used to support an 8" (203.2 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" or (12 mm) threaded r

Category: Wire Duct Clips / Retainers

Intersection Bend Radius Control, 4" HigThe Wyr-Grid® black powder coated, snap-on intersection bend radius control is 4.0" (102 mm) high, 8.2" (208.4 mm) long, and 8.2" (208.4 mm) wide. It provides 3.0" (76 mm) of bend radius control and can be installed without cutting or fabrication at tees,

Category: Wire Duct Clips / Retainers

OVERHEAD SIDEWALL 2IN H EZ EA

Category: Wire Duct Clips / Retainers

The black powder coated bracket is used to support a 30" (762 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2"" (12 mm) threaded rod drops. The hardware for attaching the bracket to a threaded rod is sold separately. The bracket comes in s

Category: Wire Duct Clips / Retainers

Electro zinc plated Wyr-Grid® 6" (50mm) high Snap-On Intersection Bend Radius Control provides 3" (76mm) bend radius control and can be installed without cutting or fabrication at tees, crosses, and right angle intersections.

Category: Wire Duct Clips / Retainers

The Wyr-Grid® black powder coated, snap-on intersection bend radius control is 6.0" (152 mm) high. It provides 3.0" (76 mm) of bend radius control and can be installed without cutting or fabrication at tees, crosses, or right angle intersections. It comes

Category: Wire Duct Clips / Retainers

The black powder coated bracket is used to support a 12" (304.8 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod drops. The hardware for attaching the bracket to a threaded rod is sold separately. The bracket comes in

Category: Wire Duct Clips / Retainers

The black powder coated bracket is made of steel and is 2.44" (61.98 mm) high, 6.05" (153.67 mm), long, 3.12" (79.25 mm) wide, and 6.05" (153.67 mm) deep. It is used to support the end of the 8.0" (203 mm) Wyr-Grid® Pathway against a vertical surface suc

Category: Wire Duct Clips / Retainers

The black powder coated bracket is 2.41" (61.2 mm) high, 28.5" (723.9 mm) long, 2.04" (51.8 mm) wide, and 28.5" (723.9 mm) deep. It is designed to support a 24" (609.6 mm) wide Wyr-Grid® Pathway from the ceiling using a pair of 1/2" (12 mm) threaded rod d

Category: Wire Duct Clips / Retainers