Cable Tray & Accessories

Cable Runway Ceiling Support Kit has a variety of components to support ladder rack from the ceiling. This Ceiling Support Kit Rack-to-Runway Bracket Kit, LRWSBK item finish Plated with a material of Steel.

Category: Cable Tray - Runway Support Kits

Cable Runway Vertical Wall Bracket secures ladder rack to a wall or other flat surface. This Vertical Wall Bracket, LVWB item finish Plated with a material of Steel.

Category: Cable Tray Mounting Hardware

CBF CF54/150WH

Category: Straight Wire Basket

Wall termination bracket works in a variety of wasy to support wire mesh tray. Slotted design adapts to any configuration kit includes two EZBN 1/4 and two CE25 with one HB2 Black Painted finish for indoor use

Category: Straight Wire Basket

Vertical Inside Bend, 90 Degree, 12" Radius, 6" Wide, Aluminum

Category: 90° Vertical Inside Cable Tray Bend

OZ-Gedney Tray-Bond Type CTC Cable Tray Clamp, Trade Size: 2 IN, Malleable Iron, U-Bolts And Nuts: Steel, Finish: Mechanically Galvanized, 190 LB-IN Recommended Installation Torque, 3/8-16 UNC U-Bolt And Nut, Dimension W: 4-1/2 IN, Dimension L: 4

Category: Conduit To Cable Tray Adapters

Unique support keeps tray secure vertically. Use on 6 inch and wider tray. Pre Galvanized finish for indoor use

Category: Cable Tray Universal Hangers

Cable Tray Cover, Series 2, 3 & 4, 36" Wide, 10' Long, Aluminum

Category: Straight Cable Tray Covers

Heavy Duty Hold-Down Bracket, 2-Bolt, 2000 lb per Pair Rating,

Category: Cable Tray Guides

90 Deg Elbow Outside Cover, Bulletin F23 (stainless Type 1 Clean Tray? Cable Tray), Size/dims: 3.00x3.00, Material/finish: Ss Type 304

Category: Straight Wire Basket

Cable Runway Ceiling Support Kit has a variety of components to support ladder rack from the ceiling. This Ceiling Support Kit Threaded Rod Kit, LTR item mesasures 5/8inx6ft with a material of Steel finish Plated.

Category: Straight Cable Ladder Tray

1/4" Round Head Screw & Flange Nut (50 Pcs). To be used with CE25EZ & CE30EZ to make a complete set, Stainless Steel

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

Cable Runway Wall Angle Support fastens ladder rack to a wall or other flat surface. This Wall Angle Support, LWASK12GZ item fits 12.00 with a material of Steel finish Plated.

Category: Cable Tray Mounting Hardware

Ladder Rack, Curved, Inside Bend, Material: Steel, Width: 6"

Category: Straight Cable Ladder Tray

Lay-in Galvanized 90-Deg Crosses used when four branches of wireway route cables in four directions. This Cross Fitting, F66XGV item fits 6.00x6.00 inches with a material of Steel finish Galvanized.

Category: Straight Wire Basket

Splice Plate Kit for FlexTray 2" Deep, 6 Inch & 8 Inch Width, Zinc Plated

Category: Cable Tray Splicer Kits

Ladder Rack, Straight Section , Bulletin Dcr (ladder Tray), Size/dims: 12.00x120.00, Material/finish: Steel/zinc

Category: Straight Cable Ladder Tray

FiberRunner® QuikLock™ Threaded Rod Trapeze Bracket for Wyr-Grid® 18" (457mm) width. Used to support FiberRunner® 4x4, 6x4, and 12x4 Channel above or below the Wyr-Grid® 18" Pathway using the same 1/2" or 12mm threaded rod used to support the WGTB18BL bra

Category: Cable Tray Trapeze Hangers

Cable Runway Movable Cross Member, 12" Wide, Black

Category: Straight Cable Ladder Tray

Cable Tray, Ladder Type, Aluminum, 9" Spacing, 18" Wide, 25' Long

Category: Straight Cable Ladder Tray

Cable Tray, Ladder Type, Aluminum, 9" Spacing, 36" Wide, 25' Long

Category: Straight Cable Ladder Tray

CAB CF105/100IN316L CABLOFIL CABLE

Category: Straight Wire Basket

BLINE 9A-1086-36W/SS6

Category: Cable Tray Ends

BAR JOIST SWAY BRACE ATTACHMENT ZNC

Category: Cable Tray Trapeze Hangers