Cable Tray & Accessories

Equipment Rack Angles are mounted to 36in and 48in tall cabinets for extra 19in rack equipment mounting. This Equipment Rack Angles 4RU, DBERA4U item finish Galvanized with a material of Steel.

Category: Cable Tray Mounting Hardware

CleanTray Straight Sections are ideal in frequent washdown areas, with or without perforations. This Straight Section CleanTray, CT22120SS item measures 2.00x2.00x120.00 inches with a material of SS304 finish Brushed.

Category: Straight Channel Cable Tray

Cable Runway Triangle Support Bracket Kit supports ladder rack from a wall. This Triangle Support Bracket Kit, LTSB18G item fits 12 and 18 with a material of Steel color Gray.

Category: Straight Cable Ladder Tray

Cable Runway Radius Drop mounts over ladder rack cross member for bending radius when dropping cable. This Radius Drop Kit, LRD12G item fits 12.00 with a material of Aluminum color Gray.

Category: Cable Tray Mounting Hardware

90 degree and tee bend kit one kit contains hardare for one tee or two 90 degree bends Slotted design fits any size tray and eliminates precise tray alignment Hot dipped galvanized exterior installation

Category: 90° Horizontal Cable Tray Bend

Ladder Rack, Straight Section , Width: 12 Inches, Material/Finish: Steel/Gray

Category: Straight Cable Ladder Tray

CABLOFIL CF54/300GC 2X12 HOT DIP GALV TRAY

Category: Straight Wire Basket

Clean Tray Stainless Steel Cable Tray, Straight Section, Dimensions: 4" x 4" x 120"

Category: Straight Channel Cable Tray

CBF UFS150200PG

Category: Cable Tray Mounting Hardware

Ladder Rack, Inside Bend, Width: 18", Material/Finish: Steel/Black

Category: Cable Tray - Runway Support Kits

CBF CABLEXIT100DC

Category: Cable Tray Drop Outs

Rack-to-Runway Mounting Plate Kit secures ladder rack to the top of equipment racks. This Rack-to-Runway Mounting Plate Kit, LRRMPBLK24 item fits 18.00/24.00 with a material of Steel colored Black.

Category: Cable Tray Mounting Hardware

Side coupling used to connect a straight section or fitting to the side of a CleanTray Wireway run. This Side Coupling CleanTray, CT46SCSS item measures 4.00x6.00 inches with a material of SS304 finish Brushed.

Category: Cable Tray Reducers

Ladder Rack Curved Section, Outside Bend, Material: Steel, Width: 12"

Category: 90° Vertical Outside Tray Bend

Lay-in Galvanized Sweep Tees offers large radius turns when mounting to vertical or horizontal surfaces. This Sweep Tee LayIn Wireway, F1212TGV item fits 12.00x12.00 inches with a material of Steel finish Galvanized.

Category: Cable Tray Horizontal Tees

90 Degree Wireway Elbow, Dimensions: 6" x 6" 2.16"

Category: Cable Tray Dividers

Cable Runway Wall Angle Support fastens ladder rack to a wall or other flat surface. This Wall Angle Support, LWASK6BLK item fits 6.00 with a material of Steel color Black.

Category: Cable Tray Mounting Hardware

Cable Runway Overhead 12-in. Stack Kit allows ladder rack to stack 12in above each other. This Runway Overhead 12-in. Stack Kit, LST12B item color Black with a material of Steel.

Category: Cable Tray - Runway Support Kits

Lay-in Galvanized 90-Deg Crosses used when four branches of wireway route cables in four directions. This Cross Fitting, F44XGV item fits 4.00x4.00 inches with a material of Steel finish Galvanized.

Category: Straight Wire Basket

1/4" plastic bolts and wing Connector fastens channel and fittings together for added strength and rigidity.

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

8 inch bolted reinforced wall bracket For wiremesh tray installations onto walls or channel framing Hot Dipped Galvanized is ideal for exterior applications

Category: Cable Tray Universal Brackets

Cable Runway Wall Angle Support fastens ladder rack to a wall or other flat surface. This Wall Angle Support, LWASK24BLK item fits 24.00 with a material of Steel color Black.

Category: Cable Tray Mounting Hardware

Cable Runway Butt-Splice Kit (cULus Classified) joins straight ladder rack sections together. This Butt-Splice Kit (cULus), LBSKW item colored White with a material of Steel.

Category: Cable Tray Splicer Kits

CleanTray 90-Degree Elbow used for 90-degree turns in washdown applications. This 90-Degree Elbow CleanTray Inside Cover, CT33EIC90SS item measures 3.00x3.00in with a material of SS304 finish Brushed.

Category: Straight Wire Basket