Search results

Conduit Hanger with Bolt, 3/8 to 1/2 Inch, Steel, For Use With Rigid/IMC/EMT to Threaded Rod

Category: Conduit Clamps

Conduit Locknut, 1-1/4 Inch Diameter, Threaded, Steel With Zinc Finish, For Use With Rigid/IMC Conduit

Category: Steel Conduit Locknuts

Junction Box, NEMA 4X, Solid Screw Cover, 8 x 8 x 4 Inch, PVC/Gray

Category: PVC / Polyester Screw Cover Junction Boxes

Weatherproof While-In-Use Cover, 1-Gang, Low Profile, Expands 1 to 3-1/2 Inch, Extra Duty, 16-in-1 Configurations, Vertical/Horizontal Mount, Color: White, Non-Metallic

Category: Expandable Weatherproof In-Use Box Covers

Round Fan/Fixture Mounting Box, Diameter 4-1/4 Inch, L-Shape, 4.24 x 3.77 Inch, For 1/2 Inch or 5/8 Inch Drywall, Includes Center Screw, Installed NM Cable Connector, Mud Cover, Multiple Knockouts, (2) Screws For Fan/Fixture Bracket Installation, 70 Pound Fan Rating/200 Pound Fixture Rating

Category: Non-Metallic Saddle Boxes

(2) 12 AWG Conductors and (1) 12 AWG Ground, UF/NMC, 600V, Copper Conductor, Gray, 250 ft. Package.

Category: 12 AWG UF / NMC

Type BR, Plug On Module Surge Protection Device, 2 Pole, 10 kAIC

Category: Surge Breakers

Universal Strut Strap, Diameter: 2", Material: Steel, Finish: Electro-Galvanized, .075" Thickness, Universal Clamp for EMT, IMC & GRC.

Category: Strut Channel Universal Conduit Clamps

Aluminum Universal Terminal, 1 Hole, 14-2 AWG (Str), 1/4" Stud, 1 Screw, Al/Cu Rated, Tin Plated.

Category: 1-Conductor Aluminum Mechanical Lugs

Clog Resistant Marker Tip. Writes through Dusty, Wet and Oily Surfaces. Durable Marker Tip for Writing on Concrete, OSB and Rough Surfaces. Built-In Hard Hat Storage Clip. Fine Point. Ink Dries in Seconds. Lanyard Hole. Anti-Roll Body Design. Non-Toxic In

Category: Marking Pens & Pencils

Screw-In Connector, 3/4 Inch, 1/2 inch, KO, Zinc Die Cast, For Use With Flexible Metal Conduit, Refer to Diagram: A = 1.565", B = 0.930", C = 1.390"

Category: Screw-In Flex Connectors

1 Inch PVC 90 Degree Elbow, Schedule 40, Gray, Bell End

Category: Schedule 40 90° Elbows - Bell End

Ariadni Series Toggle Dimmer, Controls 150W LED Or 600W Incandescent/Halogen Loads, Toggle Turn Lights On/Off, Slide Up To Brighten, Down To Dim, Provides Reliable Dimming Of Dimmable LEDs As Well As Halogens And Incandescents, Single-Pole/3-Way, White (Wallplate Sold Separately)

Category: Universal Dimmers - Toggle

60 AMP, 2-Pole, General Duty Safety Switch, Cartridge Fuse Type, Fusible with Neutral, 240 VAC, NEMA 3R. Uses: FRN-R Series Fuses. Enclosure Dims: H: 14.38", W: 8.69", D: 4.21".

Category: 2-Pole 240 Volt Fused General Duty Safety Switches

2-Gang, Decora/GFCI Device Decora Wallplate, Standard Size, Thermoplastic Nylon, Device Mount, White

Category: 2-Gang Decorator Wallplates

3 Inch PVC 90 Degree Elbow, Schedule 40, Gray

Category: Schedule 40 90° Elbows

Tapcon Anchor, Concrete Screw, Hex Head, 1/4" x 1-1/4", Steel, Zinc Plated, Order of 1 Each = Pack of 100

Category: Concrete Screw Anchors

EMT Set Screw Coupling, 1 Inch, Steel, For Use with EMT Conduit, UL 514B, CSA C22.2

Category: Steel EMT Set Screw Couplings

2-Gang, Old Work, Switch/Outlet Box, Non-Metallic, Depth: 2-3/4", Cubic Inches: 25", Includes Ears & Clamps

Category: Non-Metallic Old Work Switch / Outlet Boxes

50 Amp Surface Mount Receptacle, 125/250 Volt, NEMA 14-50R, 3P, 4W, Straight Blade, Industrial Grade, Grounding, , Side Wired, Steel Strap, - Black

Category: 50 Amp Straight Blade Receptacles

1-1/4 Inch Galvanized Coupling

Category: Steel Rigid Conduit Couplings

EMT Set Screw Connector, 1 Inch, Steel, Concrete-Tight When Taped, For Use With EMT Conduit

Category: Steel EMT Set Screw Connectors

12/2 Copper Conductors with Ground, 600V, Interlocked Aluminum Armor, Solid, 1000 ft. Reel. Wire Colors (120 Volt): Black, White, Green. O.D.: .460"

Category: Solid Conductor Aluminum Armored Cable

Telescoping Screw Gun Bracket 15- 3/4" to 25" Stud Spacing. Standard Package Quantity: 50.

Category: Prefab Assemblies