Boxes & Enclosures

Aluminum housing and base 9 1/4'' x 4 1/2'' x 2 1/2'' (235mm x 114mm x 64mm) are provided with four (4) 1'' trade size knockouts in base for hardwiring unit and two dividers which allow units to be divided on either the ''X'' or ''Y'' axis/plane. Accommodates a variety of power (NEMA or decorator), and supports Ortronics and Wiremold Open Systems connectivity. Portals are field configurable by ordering the corresponding faceplates

Category: Recessed Compartment Box Covers

Floor Box Activation with Brass Flange

Category: Assembled Recessed Round Boxes

Stl P62-cp-brn Plst Carpetplt

Category: Recessed Compartment Box Covers

For mounting the suspension system to vertical surface allowing tube to extend horizontally and swivel. This Compact Series 4 Cable Wall Joint, CCS8WJCRLG item fits 80x80mm with a material of Steel colored Lt Gray.

Category: Industrial Consolet Mounting Accessories

Disconnect Type 4x Enclosure, Bulletin Cwsd (stainless Steel Concept? Wall-mountdisconnect Encl.), Size/dims: 30.00x26.00x8.00, Material/finish: Ss Type 304

Category: NEMA 4X Wall Mount Disconnect Enclosures

Concept Swing-Out Panels, fits 20.00x20.00, White, Steel

Category: Interior Enclosure Panels

Base, Solid, 0mm, Bulletin P40 (proline Generation 2 Modular Enclosures - Proline G2 Bases), Size/dims: Fits 600x600mm, Material: Steel, Finish: Lt Gray

Category: Enclosure Housing Bases

CP3012

Category: Enclosure Back Panels

2-Gang Weatherproof Toggle Switch Cover

Category: 2-Gang Non-Metallic Weatherproof Box Covers

Single-door, combinable, floor-standing enclosure range, MCS, with IP 55/Type 12 rating. This Modular Single Door, MCS with Plate, MCS22086R5 item measures 2200x800x600mm with a material of Mild Steel color Light Gray.

Category: NEMA 12 Floor Mount Enclosures

Concept HMI Enclosure, NEMA Type 4, Material: Steel, Dimensions: 13.78" x 17.72" x 11.8"

Category: Enclosure Back Panels

Air-to-Water Indoor Heat Exchanger removes heat using chilled water moving heat without refrigerant. This ClimaGuard Air-to-Water Heat Exchanger Indoor, item WCHE04916002 is rated for 2200w 115v

Category: Enclosure Heat Exchangers

Create your own unique four-gang pedestal (two-gang front & two-gang back) by selecting the appropriate power and voice/data devices and corresponding one or two-gang face plates. This service pedestal is used with either a PT27A (2" [50.8] dia.) or a PT7XC (3" [76.2] dia.) through-floor fitting.

Category: Recessed Floor Box Service Fittings

Provides 90-degree bend in Syspend 281-Max system allowing the vertical tube to rotate 300 degrees. This Syspend 281-Max Rotatable Elbow, S2MER item measures 9.21x8.50x4.33 inches with a material of Aluminum colored Black.

Category: Industrial Consolet Mounting Accessories

SUBPLATE TILE FURN FEED SYS 1 BLK

Category: Round Recessed Box Covers

WLK RC7CTCAA RC7 COVER AL FLA

Category: Assembled Poke-Through Units

WMD 838TAL-880CS3 3-GANG AL T

Category: Square / Rectangle Recessed Box Flanges

Disconnect Enclosure, 3-Door Free-Standing, Bulletin A28mm (Heavy Duty Free-Standing Type 12 Disconnect Multi-Door Enclosure), Size/Dims: 72.12" x 99.5" x 18" , Material/Finish: Steel/Paint

Category: NEMA 12 Floor Mount Disconnect Enclosures

Siding Box Kits (Fixtures and GFCIs)

Category: Non-Metallic Old Work Mounting Brackets

Adjustable Floor Boxes with Metallic Covers

Category: Recessed Adjustable Floor Boxes

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

For RPSFB, RFSFB-OG, and RPNFB floor boxes. Kit comes complete with (2) prewired 20A duplex receptables, (receptables can be wired as standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM series open system adapters (unloaded), Ortronics Series II and TracJack adapters. Modular jacks sold seperately.

Category: Round Recessed Box Covers

Wiremold S1mc Mud Cap

Category: Octagon Metallic Box Mud Rings

HOF A90P24F2 HALF PANEL 39.88

Category: Enclosure Back Panels