Boxes & Enclosures

HOF Q1388ABECC ENCLOSURE 75X1

Category: PVC / Polyester Screw Cover Junction Boxes

Use Floor stand kit to mount Wall-Mount or Free-Stand Enclosures to the floor or elevate the enclosures. This Floor Stand Kit, AFK1818SS item measures 18.00x18.06 inch with a material of Stainless Steel 304 finish Brushed.

Category: Enclosure Floor Stands

HOF P2G3RT5

Category: Enclosure Mounting Bracket Kits

Vortex Cooler Generator kits are replacement parts for vortex coolers. This Vortex Cooler Generator Kit, VAGK15 item is rated 1500BTU with a material of Nylon colored Red.

Category: Enclosure Air Conditioners

A versatile HMI enclosure with holes for quick mounting to support arm systems and pedestals. This Concept HMI Enclosure Blue Handle Type 4, CP486012B item measures 480x600x120mm with a material of Steel color Lt Gray.

Category: Enclosure Back Panels

STC 4G4D-1/2 4G SWBOX

Category: Metallic Gang Boxes

4-11/16 Inch Square Cover, 1-Device, Tile Ring, 1 Inch Raised, Drawn, Metallic, Cubic Inches: 7.0

Category: 4-11/16" Square Metallic Box Mud Rings

Cage Nut Pkg (20), Bulletin Daccy (datacom Accessories And Hardware), Size/dims: M5, Material/finish: Steel/zinc

Category: Enclosure Clip / Clamp Nut Packages

Includes single-gang box, one 15A, 125V tamper-resistant receptacle, and nickel cover with two screw plugs. For hole cut dimensions, see installation instructions sheet. Box Dimensions: 2 1/8" W x 3 3/4" L x 3 7/8" D (54mm W x 95mm L x 98mm D) Device Plate: 3 1/8" W x 4 15/16" L

Category: Assembled Recessed Gang Boxes

Bowers 4-od-ext-spl 4in Oct ext Rng

Category: Octagon Metallic Box Extensions

Complete with one 3/4" and one 1 1/2" trade size conduit adapters and closure plugs. Covevrs available in painted black (BK), gray (GY), brass(BS), nickel (NK), bronze (BZ), and forged brushed aluminum (AL). Use with the 4FFSTC15 insert to form a complete poke-thru assembly. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. 4FFATC Series Poke-Thru Devices require a 4" [102mm] diameter hole.

Category: Assembled Poke-Through Units

Used to separate services in the center and outer compartments. Includes one (1) center compartment and one (1) external compartment.

Category: Recessed Floor Box Service Fittings

Includes insert stem with disposable plate and two-gang service head with housing, base, scrub water gasket, and barrier. Service head and insert install together to make a poke-thru assembly. Combine with faceplates (sold separately) to complete service head assembly. Shown assembled. Service head is shipped unassembled with the insert stem. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. Requires a minimum 3 1/16" (78mm) diameter hole.

Category: Assembled Poke-Through Units

WMD EFBCMG EVOLUTION FLR BOX

Category: Recessed Floor Box Tools

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

For mounting the suspension system to vertical surface allowing tube to extend vertically and swivel. This Syspend 281-Max Vertical Wall Joint, S2MWJV item measures 9.61x6.18x5.35 inches with a material of Aluminum colored Black.

Category: Enclosure Mounting Bracket Kits

HOF P2B1124 PLINTH BASE BLACK

Category: Enclosure Housing Bases

Thermostat Controller, 2.64x1.97x1.50, 230V Fahrehneit, Lt Gray, Plastic

Category: Enclosure Temperature Control Switches

<p>Adjusting ring (with three adjusting screws) for use with 437 Attaching Rings - communication only (brass and polycarbonate fittings) and power for polycarbonate fitting only. 3 25/32'' (96mm) O.D.</p>

Category: Recessed Box Adapters

SystemOne, Fire-Rated Poke-Through, AV Series, Through Floor Fitting Only, 3/4 Inch EMT for Power and 1-1/2 Inch EMT for Data, with Junction Box

Category: Assembled Poke-Through Units

Floor Box Activation with Brass Flange

Category: Assembled Recessed Round Boxes

Concept Swing-Out Panels, fits 20.00x20.00, White, Steel

Category: Interior Enclosure Panels

RVJ 1008 W/ RAISED COVER / HINGE / 2 CORNER SCREWS

Category: Fiberglass Hinged Cover Enclosures

Explosion-Proof Conduit Outlet Box, Style T, Hub Size 1/2 Inch, Hub Type External, Number of Hubs 3, Hub Location (1) Side, (2) Feed Through, Capacity 13.5 Cu Inch, Shape Round, Cover Type Externally Threaded, Cover Opening Diameter 3 Inch, Enclosure Class I Div 1 and 2 Group B C D, Class II Div 1 and 2 Group E F G, Class III, NEMA 3/4, Material Zinc Electroplated Aluminum Enameled Malleable Iron, Approval UL, CSA C22.2, Applicable Standard NEC, Application Pulling of Wires, Hazardous Location, Used On Rigid/IMC Conduit

Category: Explosion-Proof T Conduit Outlet Boxes