Conduit, Duct, & Raceway

Lay-in Painted 45-Degree Elbows are used for continuous run with 45-degree turns. This 45-Degree Elbow Lay-in, F1212G45E item measures 12.00x12.00 inches with a material of Steel colored Gray.

Category: Wireway Elbows

1-1/4 Inch Rigid Aluminum 45 Degree Elbow

Category: Aluminum 45° Conduit Elbows

Support hangers are used for wireway floor or wall installations. This Support Hanger, F88GSH item fits 8.00x8.00 inches with a material of Steel colored Gray.

Category: Wireway Panel Adapters

Panduct® type FS solid wall wiring duct, 2 W x 1.5 H, 6' length, PVC, light gray, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

Panduct® flush cover type D round hole wiring duct, 2.5 W x 3 H, 6' length, PVC, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Screw Cover Wiring Trough, Nema Type 4X, 4" x 4" x 12", 4 Cover Screws

Category: NEMA 4X Wire Trough

Halogen Free Slotted Wiring Duct, 1" x 1" x 6', White, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

4 Inch PVC 90 Degree Elbow, Schedule 40, Gray

Category: Schedule 40 90° Elbows

Layin Box Connectors used inside connected enclosure ensuring and maintaing rating. This Box Connector Lay-in, F22LB item measures 2.50x2.50 inches with a material of Steel colored Gray.

Category: Wireway Box Connectors

Lay-in Painted 90-Degree Sweep Elbows are used for large-radius turns. This 90-Degree Sweep Elbow, F88G90SE item measures 8.00x8.00 inches with a material of Steel colored Gray.

Category: Wireway Elbows

Offset box and bracket for use with NEMA Standard 70mm Screw-On Faceplates or Pan-Way® Electrical Snap-On Faceplates. Off White.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

4 inch x 182 inch x 10 foot section of wiremesh cable tray constructed of precision engineered high quality welded steel wire and can be adapted to fit any installation on-site Our patented UL Classified painted wire tray is classified as an EGC Equipment Grounding Conductor

Category: Straight Wire Basket

Cable Tray Horizontal Tee, 18" Width, 12" Radius, 4" Deep, Aluminum

Category: Cable Tray Horizontal Tees

Non-Metallic, Flexible Corduct. 1600 Series. Size: 10' Length, 3-11/32" Width, 30/32" Height. Color: Black.

Category: Non-Metallic Overfloor Raceway

Low Voltage Outside Corner Fitting for use with LD5 Raceway, ABS, Non-Metallic, Off White

Category: 1-Piece Non-Metallic Raceway Elbows

2-1/2 Inch PVC 45 Degree Sweep Elbow, 36 Inch Radius, Schedule 40, Gray

Category: 45° PVC Sweeps

Screw-Cover Wiring Trough Type 3R used for outdoor applications exposed to wet conditions. This Wiring Trough NEMA Type 3R, A141472RT item measures 14.00x14.00x72.00 inches with a material of Steel colored Gray.

Category: NEMA 3R Wire Trough

Wide Slot Wiring Duct, 3" W x 4" D x 6' L, PVC, White, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT ***Item does not include Cover***

Category: High Density Wire Duct

W-mold G2015 6-in Gry Tee

Category: Small 2-Piece Metallic Raceway Tee Fittings

Hangers are used to support a wireway run. This Drop Hanger, F22HD item fits 2.50x2.50 inches with a material of Steel colored Gray.

Category: Wireway Support Hangers

1 Inch PVC 22-1/2 Degree Elbow, Schedule 40, Gray

Category: Schedule 40 22-1/2° Elbows

Wireway, Reducer/edge Hole, Bulletin F20 (feed-through Type 12 Wireway), Size/dims: 4x4 To 2.5x2.5, Material/finish: Steel/gray

Category: Wireway Reducers

Wire Trough, Type 12, Hinged Cover, Straight Section, Size/Dims: 12.00x12.00x60.00, Material/Finish: Steel/Grey

Category: NEMA 12 Wire Trough

Lay-in Transposition for rotating open side 90 degrees retaining lay-in feature. This Transposition Sections CCW, F22LKOKT item measures 2.50x2.50 inches with a material of Steel colored Gray.

Category: Wireway Transposition Sections