Conduit, Duct, & Raceway

22 inch length profile Patented FAS style attachment secures tray without nuts and bolts Can be used in trapeze for tray widths of 18 inches or wall or under floor applications Black Powder Coated for indoor use

Category: Cable Tray Trapeze Hangers

Panduct® type H hinged cover wide slot wiring duct, 1.5 W x 2 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Wiring Duct Cover 3/4" Wide Rigid PVC, Length: 6 ft, Color: Gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

1-1/2 Inch Type 316 Stainless Steel Non-Threaded IMC Conduit, 10 Foot Length

Category: Straight Steel Rigid Conduit

Snap-on vertical sloped communication faceplate. Accepts four Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, Off White.

Category: 1-Gang Raceway Box Covers & Faceplates

Service Pole, Aluminum, (2) 20A Duplex Receptacles, 15'2", Ivory, Three Service, One Circuit

Category: Aluminum Power Poles

Non-Metallic Raceway, Non-Metallic PlugTrak Series, PLUGTRAK, 6', 20A 125V, 1-Circuit, 6) Duplex

Category: Single Circuit Non-Metallic Plugmold

Deep Strut, 1 5/8-IN. X 1 5/8-IN., 7/8-IN. KNOCKOUTS, 12 GA., 120-IN. (10 FT), GALV

Category: Steel Solid Strut

Metal Raceway, Fixture Box, 5.5 IN Diameter, HBL500/700/750 Series, Ivory

Category: Round Raceway Extension Boxes

One-piece latching surface raceway. Supplied with pre-applied adhesive backed tape. Available in 6', 8', and 10' lengths, White, PVC, Length 10.00 ft, Width 0.77 in.

Category: 1-Piece Non-Metallic Raceway

CAR A5D2S1JNNB6500 1IN X6500

Category: HDPE Innerduct

Welded Deep Strut,two Pcs. Ps 200 Welded Side To Back 1 5/8" X 3 1/4" X 12 Ga.

Category: Steel Solid Strut

Deep Strut - No Holes, Height: 1-5/8", Width: 1-5/8", Length, 20', Material: Stainless Steel 304

Category: Stainless Steel Solid Strut

5 Inch Rigid PVC Utility Duct, 20 Foot Length, Type EB-20, Gray, Bell End, Rated 90 Deg. Celsius Wire, For Encased Burial, NEMA TC-6

Category: Straight EB-20 Conduit

B-LINE B655-5/8ZN ROD COUPLIN

Category: Threaded Rod Couplings

Slotted Wall Wiring Duct, 3" x 3", Adhesive, PVC, White, 120ft/Carton

Category: Standard Density Wire Duct

Duct cover with protective film, .75 W x 6.' length, PVC, black. SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

1-1/4 Inch PVC 90 Degree Elbow, Schedule 40, Gray

Category: Schedule 40 90° Elbows

All Threaded Rod, Zinc-Plated, 3/8-16 Thread x 12 Foot Length

Category: Threaded Rod

Wire Trough, Screw Cover, Bulletin F25 (Fiberglass Type 12 & 3R Wireway And Trough), Size/Dims: 4" x 4" x 24", Material/Finish: Fiberglass.

Category: NEMA 12 Wire Trough

Lay-in Galvanized Wall Hangers are used to support a wireway run. This Support Hanger, F22GSHGV item measures 2.50x2.50 inches with a material of Steel finish Galvanized.

Category: Wireway Support Hangers

Adjustable Butt-Splice Kit (cULus Classified), Provides a Change In Up-and-Down Direction of the Cable Runway, It Can Be Adjusted to Any Angle from 0 to 90 Degrees, Made of Steel with a Painted or Plated Finish, Each Kit Connects One Ladder Rack Section to Another, Includes Mounting Hardware

Category: Cable Tray Splicer Kits

FG Feed-Through Flexible Fittings compensate for misalignment and isolates runs from shock vibration. This Flexible Fitting Feed-Through, F66WFFFG item measures 6.00x6.00 inches with a material of SS304, Fits Fiberglass finish Brushed.

Category: Wireway Cross Fittings

Wiring Trough, NEMA Type 1, Material: Steel, Dimensions: 4" x 4" x 60"

Category: NEMA 1 Wire Trough