Conduit, Duct, & Raceway

Divider used to divide CleanTray 90-degree elbow into two sections in frequent washdown areas. This Divider 90-Degree Elbow CleanTray Outside Cover, CT44DEOC90SS item measures 4.00x4.00in with a material of SS304 finish Brushed.

Category: Cable Tray Dividers

Cable Runway Termination provides termination when last section of ladder rack ends away from a wall. This Runway Termination Kit, LRTK18G item fits 18.00 with a material of Steel color Gray.

Category: Cable Tray - Runway Support Kits

Screw-Cover Wiring Trough Type 1 used for indoor applications protecting against dirt or moist. This Wiring Trough NEMA Type 1, A101048T1T item measures 10.00x10.00x48.00 inches with a material of Steel colored Gray.

Category: NEMA 1 Wire Trough

2-1/2 Inch EMT Conduit, Steel, 20 Foot Length

Category: Straight Steel EMT Conduit

6" Divider, Telescopic Straight Section, Material: Stainless Steel

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

APP GK-48-400 GASKET FOR PTB-PTC PULL BOXES

Category: Wireway Gaskets

APP 1244 2-1/2 IN X 36 IN PTC PULL BOX

Category: NEMA 1 Wire Trough

Rack-to-Runway Mounting Plate Kit secures ladder rack to the top of equipment racks. This Rack-to-Runway Mounting Plate Kit, LRRMPGZ18 item Fits 12.00/18.00 with a material of Steel finish Plated.

Category: Cable Tray Mounting Hardware

CleanTray Straight section splices for connecting two fittings with tabs in frequent washdown areas. This Straight Section Splice Sloped Top Perforated CT, CTS44PSPSS item measures 4.00x4.00 inches with a material of SS304 finish Brushed.

Category: Cable Tray Dividers

Wire Trough, Type 12, Snap-On Cover, Straight Section, Size/Dims: 4.00x4.00x24.00, Material/Finish: Non-Metallic/Gray.

Category: NEMA 12 Wire Trough

CleanTray Cross allows wireway cables to route in four directions in frequent washdown areas. This Cross CleanTray, CT44CSS item measures 4.00x4.00in with a material of SS304 finish Brushed.

Category: Wireway Elbow-Tee-Cross Fittings

Flexible Steel Conduit, Standard Wall, 1/2 Inch, 1000 Foot Reel

Category: Flexible Steel Conduit

Deep Strut, Back to Back, Elongated Holes, Steel, Pre-Galvanized, 1-5/8" x 3-1/4" x 20'

Category: Steel Back-To-Back Strut

5 Inch PVC 11-1/4 Degree Sweep Elbow, 36 Inch Radius, Gray, Schedule 40, Bell End

Category: 11-1/4° PVC Sweeps

Fine Profile Medium-Wall Very Flexible Black Conduit, (LLPA) Material - Polyamide 6, Conduit Size NW - 12, 50 Meters

Category: Indoor Rated Innerduct

Flexible Aluminum Conduit, 3/8", Reduced Wall, 100' Coil

Category: Flexible Aluminum Conduit

Metal Raceway, Fixture Box, 5.5 IN Diameter, HBL500/700/750 Series, Ivory

Category: Round Raceway Extension Boxes

Stainless Steel PVC Coated Flexible Conduit, 3/4", 25 FT Coils

Category: Flexible Coated Stainless Steel Conduit

Hubbell Wiring Device Kellems, Wire Basket Tray, Overhead Tray,Accessories, Center Support, For 8" Tray, Pre-Galvanized

Category: Cable Tray Center Hangers

BLN 4G-12-90HB24 HORIZONTAL BEND, SERIES 2,3,4&5, 3" NEMA / 4" HEIGHT, 90 DEG., 12" WIDTH, 24" RADIUS, HOT DIP GALVANIZED

Category: 90° Horizontal Cable Tray Bend

3/4 Inch Liquidtight Steel Flex, UL Listed, Type UA, Steel Core, PVC Jacket, Gray, 100 Foot Coil, Integral Bonding Strip

Category: Liquidtight Flexible Metallic Conduit

Closure Plate used to close the end of a CleanTray wireway run. This Closure Plate CleanTray, CT66CPSS item measures 6.00x6.00in with a material of SS304 finish Brushed.

Category: Cable Tray Ends

CleanTray 90-Degree Tee Inside Cover Sloped for two 90-deg turns in washdown applications. This 90-Degree Tee CleanTray Inside Cover Sloped, CTS66TICSS item measures 6.00x6.00in with a material of SS304 finish Brushed.

Category: Wireway Tee Fittings

CleanTray Hanger Brackets are used for supporting a CleanTray run in areas with frequent washdown. This Hanger Bracket CleanTray, CT66HB item measures 6.00x6.00 inches with a material of SS304 finish Brushed.

Category: Wireway Support Hangers