Connectors, Crimps, & Termination

Aluminum Multiple Tap Connector, Clear Insulated, 2 Port, 1 Sided Entry, 2 AWG-750 kcmil, Al/Cu Rated.

Category: Single Sided Entry Wire Connector Blocks

Cold Shrink, Cable Termination, Outdoor Kit, Conductor Range: 300 MCM - 500 MCM @ 5 kV, 250 MCM - 500 MCM @ 8 kV, 2/0 AWG - 300 MCM @ 15 kV, 2 AWG - 4/0 AWG @ 25/28 kV, Cable Diameter Range: 0.72 - 1.29". For use with Shielded Cables.

Category: Medium Voltage Outdoor Cold Shrink

C-Tap Connector, Wire Range: 6 AWG to 10 AWG, (Run) 6 AWG to 14 AWG (Tap), Copper

Category: C-Tap Press-On Lugs

Water Pipe Ground Clamp, Silicon Bronze, 1 1/4"–2" Pipe, #10 Solid-#2 Stranded, 6 mm² Stranded-25 mm² Stranded

Category: Bare Wire Ground Clamps

Heat Shrink, Thin Wall, Cross-Linked Polyolefin, 600 Volt, Color: Black, Shrink Ratio: 2:1, Size: 1/2 Inch, Expanded Insulation Diameter: 1/2 Inch, Recovered Insulation Diameter: 1/4 Inch, Tube Length: 200 Foot Piece. Provides: Flame, Moisture and Abrasion Protection

Category: Thin Wall Heat Shrink

Mechanical Lug, Pressure Bar / Fixed Tongue, Copper Alloy, 1 Barrel, 1 Hole Mount, Rated for Copper Conductors Only, 4/0 AWG to 500 MCM, Bolt Hole: 1/2 Inch, Hex Head Screw

Category: 1-Conductor Copper Mechanical Lugs

8428-12P COLD SHRINK TUBE

Category: Low Voltage Cold Shrink Connector Insulators

Power Distribution Block Cover, 1 Pole, AWG 14 - 2/0 (Run), AWG 14 - 2 (Tap)

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Service Entrance Sleeve, Aluminum, 2 AWG to 1 AWG, CU/AL & ASCR Rated, Size: 5/8 Inch Outer-Diameter X 2 Inch Length, #2 ACSR,#1 Str.-#2 Str.,#1 Compt-#2 Compt AL,#1 Str.-#2 Str. CU(bbl A), #2 ACSR,#1 Str.-#2 Str.,#1 Compt-#2 Compt AL,#1 Str.-#2 Str. CU, bbl A:Red bbl B:Red, BG or 5/8 Index

Category: Standard Barrel Aluminum Compression Sleeves

Power Distribution Block, 3-Pole, (2) 6 - 350 Run/Tap

Category: Multiple Primary / Multiple Secondary Non-Insulated Distribution Blocks

Har Gbi14412tmgb 1/4x4x12 Gro

Category: Bus Bars

Long Barrel TinnedCopperSplice4 AWG Long Barrel Tinned CopperSplices is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

Category: Long Barrel Copper Compression Sleeves

Winged Wire Connector, Blue, Easy Twist, 14-6 AWG, Bag of 100

Category: Color Coded Twist On Wire Connectors

Feeder Spacing Adapter Plate, 3-Pole, 8 Inch x 4.5 Inch x 0.63 Inch, for 1492-PDE1225, PDE1C225, PDE1183, PDE1C183

Category: Terminal Block Accessories

OFF CENTERED PIN 1/0 350 KCMIL CLASS B C H I K DLO

Category: Aluminum Pigtail Adapters

TOP-S-CD Large Ceramic Wire Connector, Wire Range: 22-14 AWG. Temp: 1000 F Max

Category: High Temperature Wire Connectors

Sectional Ground Rod Coupling, Copper, 5/8"

Category: Ground Rod Couplings

NSI300T2 300 MCM-6 PANELBOARD LUG 2 HOLE STACKED MOUNTING HOLE 1 3/8

Category: 2-Conductor Aluminum Mechanical Lugs

Harger, 1" x 6-3/4", Stainless Steel, Kit of Two with Insulators, Wall Mount Bracket, Each

Category: Bus Bars

Deadbreak Adapter, 35kV, 1/Box, 1.664" - 1.785" (42.3 - 45.3), Black

Category: Loadbreak / Deadbreak Cable Adapters

Copper Split Bolt Connector 10 AWG Copper Split Bolt Connectors are high-strength solderless service connectors made of high-copper alloy for copper and copperweld wires. Type for two maximum wire sizes.

Category: Copper Alloy Split Bolts

Dual Rated Turn Prevent Lug (2) 600 MCM - 2 AWG Dual Rated Turn Prevent Lugs are made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. For use with both copper and aluminum conductors. Rated 600V (2000V max. per UL486B). UL 486A/B Listed. Temperature Rating 90 degrees C.

Category: Aluminum Panelboard Lugs

BUR BISR500FX 500-6 IN-LINE

Category: ln-Line Splicers/Reducers - Insulated

TOOL H 6.0/2610AWGINSBK

Category: Single Insulated Ferrules