Connectors, Crimps, & Termination

THB 54174UF 250 CU.STD.BRL.3/

Category: 1-Hole Copper Compression Lugs

weld metal primarily used in cathodic protection applications on cable to steel or stainless steel. The color code for CA15PLUSF33 is black.

Category: Plus Welding Material

Main Grounding Busbar, TMGB Lettering, 1/4 Inch Height x 4 Inch Width x 20 Inch Length, Copper

Category: Bus Bars

CAD RRH-542Q 4/0 TO #6 RE BAR HORIZONTAL

Category: Horizontal Cable to Horizontal Rebar

Seamless Copper Tube Uninsulated Ring Terminal; 12-10 AWG; 1/4 "; 1.17 in L; .47 in W

Category: 1-Hole Copper Compression Lugs

PDB 3P AL INTERMEDIATE UL1953

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Parallel Tap Connector with Cover, Aluminum, Wire Size: Main - 2-12 STR, Tap - 4-14 STR, 600 Volt

Category: Aluminum Tap Lugs

Exothermic Mold, Cable to Ground Rod, Ground Rod: 5/8", Cable: 2 AWG, Mold Family: GT

Category: Cable to Ground Bar - Horizontal Tee

Multi-Tap Connector, Aluminum, Insulated, 4 Port, 1 Sided Entry, 12 AWG to 500 MCM, 600 Volt, Direct Burial Rated, AL/CU Rated

Category: Connector Blocks - Submersible - One Sided Wire Entry

THB 54876BEUB CU TP 2HL LUG 9

Category: 2-Hole Long Barrel Copper Compression Lugs

The HSTT100-CC Thin Wall Heat Shrink Tubing shrinks around wires, connectors, joints, and terminals when heated to protect against abrasion. Applications include insulating and protecting wires/cables in indoor, dry locations. Shrink ratio: 2:1. Temperature range: -67°F to 275°F (-55°C to 135°C). Cross-linked polyolefin. 1.00” Diameter x 100’ Long (25.4 mm x 30.5 m). Color Clear. 1 roll.

Category: Thin Wall Heat Shrink

BUR GD1626 4SOL-2/0STR

Category: U-Bolt Ground Clamps

THB 54916BEUB 54916BE 90 DEGR

Category: 1-Hole Long Barrel Copper Compression Lugs

Mold,cable To Grd Rod,vert Tee Horz Thru

Category: Cable to Ground Bar - Horizontal Tee

Grounding Busbar, Copper, 1/4" x 4" x 48"

Category: Bus Bars

Fence Fabric Mechanical Ground Connector, #6 AWG

Category: Ground Wedges

HLP GECLB3/02C 3/0 AWG LONG B

Category: 2-Hole Long Barrel Copper Compression Lugs

The Next Generation Power Distribution Block (PDB). Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. All blocks are UL and CSA approved while meeting spacing requirements for feeder and branch circuits in conjunction with UL508A and the National Electrical Code. PDB options include single or dual conductor primary inputs and up to 30 secondary outputs.

Category: Double Primary / Double Secondary Non-Insulated Distribution Blocks

3M™ Cold Shrink Shielded Splice Kit 5550 Series are for splicing 5 kV and 8 kV shielded, solid dielectric, power cables. Meets requirements of IEEE 404. Each kit contains all the materials (except connectors and optional ground strap) required to construct three (3) single conductor splices on Tape Shield, Wire Shield or UniShield® cables. Note: The kit can also be used to splice a shielded to a non-shielded 5/8 kV cable. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Category: Medium Voltage Cold Shrink Splice Kits

Two-hole, long barrel lug with window, 350 kcmil, 1/2 stud hole, 1.75 hole spacing.

Category: 2-Hole Long Barrel Copper Compression Lugs

Mechanical Lug, Aluminum, 1-Conductor, 6 AWG -350 MCM, 3/8" Stud Hole, Use with Stranded Aluminum or Copper Code Conductors

Category: 1-Conductor Aluminum Mechanical Lugs

Compression Lug, Copper, 1-Hole, Flex, 500 kcmil Cable, 5/8 Inch Stud Hole

Category: 1-Hole Copper Compression Lugs

WEI 9037510000 TOOL H 2.5/20.5 ZH

Category: Single Insulated Ferrules

PDB 3P AL INTERMEDIATE UL1953

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks