Search results

OZ-Gedney Type TX Expansion Fitting, Trade Size: 3 IN, 5.38 IN Outside Diameter, Flexibility: EMT Conduit, Third Party Certification: UL 14895, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For EMT Conduit

Category: Steel EMT Expansion Fittings

Grounding Bushing, 1",Threadless, Insulated, Set-Screw Connection Type, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 4 AWG, Steel Clamping/Set Screws, Rated 150°Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threadless Ground Bushings

OZ-Gedney Type SR Grip-Tite Strain Relief Straight Connector, Size: 1 IN, Conductor Range: 0.75 - 0.875 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated Body,

Category: Straight Malleable Iron Cord Grips

2-IN RT INS KO HUB

Category: Malleable Iron Conduit Hubs

OZG PG-107-07 3/4" ARMD/MC CB

Category: Single Barrel MC / AC Connectors

OZ-Gedney Type H-WBS Conduit Hanger With Carriage Bolt And Nut, Size: 2 IN, 1 Holes, Steel, Finish: Zinc Plated, Dimensions: 3-3/4 IN Length X 1-1/4 IN Width, Dimension B: 1-7/8 IN

Category: Conduit Clamps

OZG ABLG-3622 3-1/2" INS GRD

Category: Threaded Ground Bushings

Liquidtight Flexible Conduit Connector, Type Straight Male, Throat Type Insulated with Ground Lug, Trade Size 3-1/2 Inch, Material Zinc Electroplated Malleable Iron Body/Nut, Zinc Electroplated Steel Ferrule, Approval UL 467, CSA C22.2, Used On Flexible Metallic Liquidtight Conduit, Applicable Standard Federal Specification WF-406E, NEMA, Wire Size 1 to 4/0 AWG

Category: Malleable Iron Liquidtight Flex Connectors

Conduit Body, Type LB, 2 Inch Diameter, Form 7, Malleable Iron/Zinc

Category: Type LB Iron Conduit Bodies

Pulling Elbow, Male/Female, 90°, Insulated, Raintight, Size: 2 Inch, Material/Finish: Malleable Iron/Zinc, For Connecting Rigid/IMC Conduit to Box or Enclosure.

Category: Iron Rigid Conduit Elbows

Conduit Body, Type LB, 3 Inch Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type LB Iron Conduit Bodies

Conduit Body, Type LL, 1-1/2 Inch Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type LL Iron Conduit Bodies

Flexible Coupling, 3/4 Inch x 18 Inch Long, Explosion-Proof, Bronze End Fittings/Outer Braid, Maximum Temperature 300°F, For Use in Hazardous Locations to Isolate Conduit Systems From Vibration, Maximum Temperature 300°F, For Use in Hazardous Locations to Isolate Conduit Systems From Vibration

Category: Explosion-Proof Type ECGJH Couplings

Grounding Bushing, 3-1/2 Inch, Threaded, Insulated, Malleable Iron Body/Zinc Plated, Aluminum Lug 6 AWG - 250 MCM, Rated 150° Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

Conduit Body, Type LL, 2 Inch Diameter, Form 7, Malleable Iron/Zinc

Category: Type LL Iron Conduit Bodies

OZ-Gedney Type AX Expansion Fitting, Trade Size: 1 IN, 2-5/8 IN Outside Diameter, Length: 6-5/8 IN, Flexibility: RMC And IMC, Copper-Free Aluminum, Third Party Certification: UL File Number E-11853 Per NEC 250.98, CSA 11584, Applicable Third Party

Category: Aluminum Rigid Conduit Expansion Couplings

OZ-Gedney Type AX Expansion Fitting, Trade Size: 2 IN, 4 IN Outside Diameter, Length: 7-1/8 IN, Flexibility: RMC And IMC, Malleable Or Ductile Iron, Third Party Certification: UL File Number E-11853 Per NEC 250.98, CSA 11584, Applicable Third Party

Category: Iron Rigid Conduit Expansion Couplings

OZ-Gedney Type 4Q Liquid Tight Straight Connector, Size: 3-1/2 IN, Connection: Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, 4-7/8 IN Width, 3-1/2 IN Height, Third Party Certification: UL File Number 11853, CSA 009795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, Hazardous Locations: Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

Union, 1/2 Inch, Female/Female, Aluminum, Conduit to Enclosure, Explosion-Proof/Dust-Ignitionproof.

Category: Explosion-Proof Type UNF Unions

Conduit Body, Type: LR, Size: 3 Inch, Spec 5, Material: Malleable Iron, For Use With Rigid/IMC Conduit

Category: Type LR Iron Conduit Bodies

Liquidtight Connector, 45°, Insulated, Size: 1-1/2 Inch, Malleable Iron

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 3 IN, 4-3/16 IN Outside Diameter, Length: 3-5/16 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third P

Category: Iron Rigid Conduit Three Piece Couplings

Reducing Bushing, Threaded, 3/4 Inch x 1/2 Inch, Steel, For Use With Rigid/IMC Conduit

Category: Steel Reducing Bushings

Conduit Body, Type: LB, Size: 3/4 Inch, Form 85, Includes Cover and Gasket, Material: Aluminum, For Use With Rigid/IMC Conduit

Category: Type LB Aluminum Conduit Bodies