Search results

Rigid Conduit Reducer Coupling, Large End Trade Size 4 Inch, Small End Trade Size 3 Inch, Material Zinc Electroplated Malleable Iron, Size 5-3/8 Inch Dia x 3-3/16 Inch L, Enclosure Class I Div 1 2 Group A B C D, Class II Div 1 2 Group E F G, Class III, Approval CSA C22.2, Applicable Standard NEC 500 to 503/505, Constructional Feature Dust Ignitionproof, Explosion-Proof, Used On Threaded IMC/Rigid Metal Conduit

Category: Explosion-Proof Threaded Bell Reducing Couplings

OZ-Gedney Type 4Q-T Liquid Tight Straight Connector, Size: 4 IN, Connection: Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, 6-1/8 IN Width, 3-1/2 IN Height, Third Party Certification: UL File Number 11853, CSA 009795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, Hazardous Locations: Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

OZ-G AXB125 1-1/4 IN EXP CPLG

Category: Iron Rigid Conduit Expansion Couplings

1-1/4 IN ALUM UNION

Category: Explosion-Proof Type UNY Unions

OZ-Gedney Type SE Watertight Service Entrance And UF Cable Connector, Size: 3/4 IN, Conductor Range: 0.165 IN X 0.575 IN - 0.290 IN X 0.710 IN (Oval Grommet), Malleable Iron Body, PVC Grommet, Steel Compression Washer, Finish: Zinc Electroplated Bo

Category: Straight Steel Cord Grips

Conduit Hardware, Bushings, Insulating, Trade Size: 5 Inch, Material: Malleable Iron or Steel/Zinc Plated, Connection Type: Set-Screw, Maximum Temperature Rating: 150 Degree C, Features: For Rigid and IMC, Outside Diameter: 6 1/4 Inch, Width: 1 1/4 Inch,

Category: Threadless Ground Bushings

3-1/2 IN 2 SCREW CONN INSUL

Category: Straight Squeeze Flex Connectors

OZG 31-200T 2" COMP CN RGD CO

Category: Rigid Compression Connectors - Iron

Grounding Bushing, 1-1/2 Inch, Threaded, Insulated, 14 to 4 AWG, Material: Malleable Iron, Lug: Bronze, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

OZ-Gedney EMT Nail Strap, 1/2 IN Cable, Cable Type: EMT, Malleable Iron, Finish: Mechanically Galvanized, Dimensions: 2-3/16 IN Nail Length X 3/16 IN Nominal Thickness

Category: Nail Straps

OZ-Gedney Type KC Center Stopped 2-Screw Clamp Connector, Size: 1/2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 1/2 - 29/32 IN, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 1-9/16 IN Length X 1-7/8 IN Width, Third Party Certification: UL File Number E-11852, CSA 9795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, For Armored Cable, Flexible Metal Conduit, Interlocked Metal Clad Cables, Non-Metallic And Service Entrance Cable

Category: Straight Squeeze Flex Connectors

OZ-Gedney Type 4Q-TG Liquid Tight Connector, Size: 1 IN, Connection: Tapered MNPT Hub, Malleable Iron Body, Steel Ferrule, Finish: Galvanized Body, Zinc Electroplated Ferrule, NEMA Rating: NEMA 4, Insulated Throat, Wet Location, 1-3/4 IN Width, 1

Category: Malleable Iron Liquidtight Flex Connectors

OZ-Gedney Type AXDX Combination Deflection/Expansion Fitting, Trade Size: 2 IN, 4 IN Outside Diameter, Length: 17-1/4 IN, Flexibility: RMC And IMC, Sleeve: Neoprene, End Couplings: Bronze, Bonding Jumper: Tinned Copper Braids, Bands: Stainless St

Category: Bronze / Copper Rigid Conduit Expansion Couplings

OZ-Gedney Spec 5 Type T Conduit Body, 3/4 IN Hub, Length: 6-1/8 IN, 1-5/8 IN Height, Malleable Iron, Finish: Hot Dip Galvanized, Connection: Tapered FNPT, 3 (6 AWG) Conductors, 7 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 0

Category: Type T Iron Conduit Bodies

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 1/2 IN, Connection: Male NPS Hub X Compression, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 1-3/8 IN Maximum Diameter X 3/4 IN Length, 7/16 IN Thread Length, Third Party Certification: UL File Number E-11853, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For Threadless Rigid Conduit

Category: Rigid Compression Connectors - Iron

OZ-Gedney Spec 5 Type LL Conduit Body, 2-1/2 IN Hub, Length: 13-3/4 IN, 4 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 3 (4/0 AWG) Conductors, 142 CU-IN Volume, Third Party Certification: UL F

Category: Type LL Iron Conduit Bodies

Rigid Conduit Expansion Coupling, Trade Size 1-1/2 Inch, Diameter 4-3/8 Inch, Length 9-7/8 Inch, Maximum Movement 4 Inch, Constructional Feature Corrosion Resistant, Material Ductile Iron Body, Tinned Copper Bonding Jumper, Neoprene Grommet, Approval UL, Used On Rigid Conduit/IMC

Category: Iron Rigid Conduit Expansion Couplings

OZ-Gedney Type SR9 Gold Seal Strain Relief 90 DEG Connector, Size: 1/2 IN, Conductor Range: 0.2 - 0.3 IN, Malleable Iron, PVC Grommets, Finish: Zinc Plated, 90 DEG C, Connection: MNPT, 0.5 IN Throat Inside Diameter, 7/16 IN Thread Length, Dimensi

Category: 90° Malleable Iron Cord Grips

Explosion-Proof Conduit Drain and Seal Fitting, Type Drain, Turning Radius 1-15/16 Inch, Trade Size 3/4 Inch, Connection Type Male, Female, Material Zinc Electroplated Chromate Epoxy Powder Coated Ductile/Malleable Iron, Mounting Position Vertical, Enclosure Class I Div 1 and 2 Group B C D, Class I Zone 1 and 2 Group IIA IIB, Class II Div 1 and 2 Group E F G, Class III, Approval UL 886, CSA C22.2, Overall Length 5-5/32 Inch, Application Seal Conduits in Vertical or Horizontal, to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames from One Portion of the Electrical System to Another Through the Conduit, Constructional Feature Explosion-Proof

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Oz-g 4q-4300-l 3-in 45d L/t conn

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type 4Q Liquid Tight Straight Connector, Size: 5 IN, Connection: Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, 7-3/8 IN Width, 3-1/2 IN Height, Applicable Third Party Standa

Category: Malleable Iron Liquidtight Flex Connectors

Conduit Body, Type: LB, Size: 2 Inch, Spec 5, Material: Malleable Iron, Included with Covers and Gaskets, For Use With Rigid/IMC Conduit

Category: Type LB Iron Conduit Bodies

OZ-Gedney Type EYAM Vertical/Horizontal Sealing Fitting, Size: 1-1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered MNPT X Tapered FNPT, Dimensions: 2 IN Body Diameter X 6-3/4 IN Overall Length, 2-1/4 IN Turning Radius, 9 OZ

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

OZG SPLG-4000-2 TYPE S 4" CBL

Category: Iron Rigid Conduit Cable Supports