Search results

Conduit Clamp, 6 Inch Diameter, Pre-Assembled, Steel With Zinc Finish, For Use With Rigid/IMC Conduit

Category: Strut Channel Universal Conduit Clamps

Hammer-On Flange Clip for 5/16"-1/2" Flange. Standard Packaging Quantity: 100

Category: Flange Clips

3", Insulated Ground Bushing, Threaded Type, Bushing Material: Malleable Iron, Lug Material: Aluminum. Wire Size: 6 AWG (Stranded) - 250 MCM (Stranded). For Copper or Aluminum Grounding.

Category: Threaded Ground Bushings

4 Inch, Insulated Ground Bushing, Threaded Type:, Bushing Material: Malleable Iron, Lug Material: Aluminum. Wire Size: 6 AWG (Stranded) - 250 MCM (Stranded). For Copper or Aluminum Grounding.

Category: Threaded Ground Bushings

Liquidtight Connector, 1 Inch, 90°, Insulated Throat, Zinc Electroplated Steel

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Liquidtight Connector, 3/4 Inch, 90°, Insulated Throat, Zinc Electroplated Steel

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Cable Snap Clip, Low voltage, data and MC/AC cable to 3/16" thru 9/32" flange thickness, 0.468"–0.562" OD, Standard Packaging Quantity: 100.

Category: Flange-Mount Cable/Conduit Clips

EMT Compression Coupling, 1-1/4 Inch Diameter, Concrete Tight, Steel With Zinc Chromate Finish

Category: Steel Concrete Tight EMT Compression Couplings

Standard Strut Strap, Diameter: 1 1/2", Material: Aluminum, Finish: Aluminum., EG Fastners, For use with: GRC, IMC, SCH 40/SCH 80 Conduit.

Category: Conduit Strut Strap - Aluminum

Sealing Fitting, Vertical/Horizontal, 1/2 Inch, 25% Fill, Female, Explosion-Proof, Dust-Ignitionproof, Rain Tight, Malleable Iron, For Use in Close Turning Radius With Rigid/IMC Conduit

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Rigid/IMC Conduit Strap, 3/4 Inch, 1-Hole, Zinc Plated Steel, For Use With Rigid/IMC Conduit

Category: Steel 1-Hole Conduit Straps

Compression Coupling, 2 Inch, Steel, For Use With EMT Conduit

Category: Steel Concrete Tight EMT Compression Couplings

AC/MC Connector, 90 Degree, Insulated, 3/8 Inch Diameter, 1/2 Inch Knockout, 14/2 and 12/2 With and Without Ground 14/3, 14/4,12/3, 12/4, 10/2, 10/3, Zinc Die Cast

Category: 90 Degree Single Barrel MC / AC Connectors

Box/Conduit Hanger with Rod/Wire Clip, 1" EMT, 1/4" Rod, #12 Wire

Category: Combination Box/Conduit Hangers From Drop Wire/Rod & Beam

Reducing Bushing, 3 Inch to 2 Inch, Threaded, Bushing Material: Aluminum.

Category: Aluminum Reducing Bushings

ARLINGTON DLN4 1 1/4 DC LN 1 1/4 DIE CAST LOCK NUT

Category: Die Cast Conduit Locknuts

Chase Nipple, Nylon Insulated, 3 Inch, Malleable Iron, For Use to Effectively Bush Factory or Field-Punched, Cut, or Drilled Holes in Metal Boxes and Enclosures, and Couple Boxes Back-to-Back.

Category: Iron Chase Nipples

Three Hole Corner Angle - Electro-Galvanized Finish (EG) Bolt Hole Diameter 9/16"

Category: 90 Degree Strut Channel Corner Connectors

Strut Strap, Universal, 1-1/2 Inch, Material: Steel, Finish: Electro-Galvanized, .075 Inch Thickness, Universal Clamp for EMT, IMC & GRC.

Category: Strut Channel Universal Conduit Clamps

Flange-Mount Conduit Clips, Snap-Close, 1 Inch Hammer-On Pipe Clip for Flanges 5/16 Inch to 1/2 Inch, Load Limit: 75 lbs. Standard Packaging Quantity: 100.

Category: Flange-Mount Cable/Conduit Clips

Snap-To-Stud Cable Support, Screwless, Cable Locating Ribs To Maintain Cable Separation, Flared Edges For Cable Protection, Pregalvanized Steel

Category: NM-B NMC & MC/AC Cable Support For Studs

Eaton B-Line series end cap, 0.81" H x 1.25" L x 1.62" W, Steel, White

Category: Strut Channel Safety End Caps

1 Inch Steel Reusable Liquid Tight Connector

Category: Straight Steel Liquidtight Flex Connectors

Flex Connector, Screw in Type, 1/2" Diameter, Insulated Throat, Steel With Zinc Finish

Category: Screw-In Flex Connectors