Power Distribution

MULTI9 GFP 2P 25A 26MA A 480Y/277V RCCB

Category: 2-Pole DIN Rail Mount Circuit Breakers

Breaker, Bolt On, 3 Pole, 60 Amp, 480Y/277 Volt AC, 18kAIC, with Shunt Trip

Category: Bolt-On Shunt Trip Circuit Breakers

MINIATURE CIRCUIT BREAKER 120V 20A

Category: Arc Fault Bolt-On Circuit Breakers

C-H MBT48B125BTS 1 IN TYPE BR, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

Transformer, Control Circuit, 250 VA, 240 X 480 - 120/240 Volt AC, No Fuse Block, No Taps

Category: 250 - 450 VA Industrial Control Transformers

Circuit breaker, PowerPacT J, 175A, 3 pole, 600VAC, 25kA, lugs, thermal magnetic, 80%

Category: 600V Rated Molded Case Circuit Breakers

Load Center, 40 Amp, Main Lugs, 1-Phase, 120/240 Volt AC, 2 Space, 4 Circuit, NEMA 1, Surface

Category: 1-Phase Main Lug Copper Bus Load Centers

Transformer, Control, 100 VA, 240 X 480, 230 X 460, 220 X 440 - 120, 115, 110 Volt AC, Type T, 1-Phase, Open

Category: 60 - 100 VA Industrial Control Transformers

Circuit Breaker, Type QO, Plug-In, 1-Pole, 20 Amp, 120/240 VAC, 10 kAIC, Arc Fault Circuit Interrupter

Category: Residential Arc Fault Circuit Breakers

Panel Board Interior, 400 Amp, 480/277 Volt AC, 3-Phase, 42 Circuits, Copper Bus, 64.5 Inch Box/Front Height, Non-Feed Through

Category: Panelboard Interiors

Main unit, EZ Meter-Pak, 1000A, 120/240VAC, 1 phase, 3 wire, 1200A busbar, 65kA SCCR main breaker, over/under, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Main Terminal Boxes

Breakaway 1-Pole In-Line Fuse Holder for Solid Neutral, Load: 8-12 AWG Cu Crimp, Line: 12-3 AWG Cu Set Screw

Category: In-Line Fuse Holders

Fuse, 80 Amp Class RK1 Dual Element, Time-Delay, Permanent Fuse Indication, 600 Volt, LOW-PEAK

Category: Class RK1 Power Fuses

Eaton's Three-Phase Residential Meter Stack Module, Group Metering Type, 200A, Aluminum Bus 800 Ampere, No bypass, Outdoor, Five-jaws, 5 Sockets, Three-phase in, single-phase out, Ringless Security, 120/208V, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Residential Meter Stacks

BR style 1-inch loadcenter, main circuit breaker, high aid, 200A, single-phase, 40-pole, 40 circuits, 30 spaces, 120/240V, #2/0-300 kcmil Cu/Al at 60¦C or 75¦C wire, NEMA 1 enclosure, c4 box size

Category: 1-Phase Main Breaker Aluminum Bus Load Centers

General-Purpose Encapsulated Transformer, EP, Single-phase, PV: 120 X 240V, Taps: None, SV: 120/240V, 115¦C, 3 kVA, Al windings, Frame: 176, Indoor-Outdoor

Category: 1.6 - 5 KVA Buck-Boost Transformers

Spectra Power - Merchand. Old Style Power Pack Units. 4DPK9112

Category: Molded Case Circuit Breaker Base Mounting Hardware

Ground Bars Are Required In All Panels (main Service Panels Include Ground And Neutral). Ground Bars Must Be Purchased Separately For Main Lug Panels, Since Theground And Neutral Must Be Separated. All Of Our Eaton Ground Bar Catalog Numbers Start With Gbk, Followed By The Number Of Circuits In The Ground Bar. To Be Sure You're Selecting The Correct Ground Bar, Divide The Number Of Circuits In Thepanel By 2 And Pick The Closest Numbered Ground Bar. For Example, A 20 Circuit Panel Would Require A Gbk10p. Both Our Br And Ch Loadcenters Use The Same Groundbars.

Category: Load Center Neutral & Ground Bars

CUT CH56476 LUG - 3/0 - 800 MCM FOR K-BASE SOCKET

Category: Group Metering Main Lug Kits

200 Amp Standard Meter Center, Ringless Style, 4 Jaws, 1-Phase, 120/240V, 10 kAIC, 20/40 Distribution, Main Breaker Provision, BR Type Branch Breakers, OH/UG Service, NEMA 3R - Rainproof Enclosure, Surface Mount *NON – EUSERC*, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

AB 140MG-H8P-C50-KA 140G 125A H FRAME MTR PROTECTION CKT-BKR

Category: 480V Rated Molded Case Circuit Breakers

Q line circuit breakers are one-inch wide per pole, compact, thermal-magnetic devices designed for residential and commercial applications. The QB breakers are bolt-on versions of the Q Line used for bolting to the bus connections of load centers and lighting panels. All Q Line circuit breakers feature Quick-make / Quick-break mechanisms, common trip bars, and easy to spot trip indication to ensure safety and reliability. Q Line breakers are available in 1, 2, and 3 pole versions, can be ordered with auxiliary contact and shunt trip accessories, and can be ordered for use in HID applications. 0ST1 Amps 40 A

Category: Bolt-On Shunt Trip Circuit Breakers

AB 1497-B-HXDX-3-N CONTROL CIRCUIT

Category: 60 - 100 VA Industrial Control Transformers

Spectra Series Panelboards. Renewal Parts. Circuit Breaker Mounting Modules Plug-In Spectra? 3-pole. Mounting Hardware. Use to mount main or branch circuit breakers into panelboard. Breakers bolt on to the mounting modules. FP suffix indicates that all AFP filler plates, with cutouts for handles, are included to fit all applicable box widths. On double branch modules, filler plates to cover any unused breaker poles are also included. SE and SF breakers located adjacent to a fusible switch, PCU or TVSS require mounting modules suitable for mounting ?Adjacent to Switch.?. SGDA circuit breaker rated 400 amps maximum. Circuit breakers not included in module price. Includes all necessary hardware. Breaker Frame - SFHA or SFLA or SFPA. Maximum Breaker Amperage - 250A. 3 Pole.

Category: Circuit Breaker Mounting Kits