Control & Automation

Pilot Light, Incandescent, Transformer, 120 Volt AC, Green, 30 mm, NEMA 4/13

Category: Assembled Pilot Lights

PB 2POS MOMTRY FLUSH 1NO

Category: 30mm Flush Pushbutton Operators

SENSAGUARD STANDARD CODE ACTUATOR -N

Category: Safety Actuators

Assembled Jumper Bar without IP20 Protection. 10 Pole. 32 Amp. Type: BJM6. Used with 4 mm Blocks.

Category: Terminal Block Jumper Bars

5032 8Ch IO-Link master Mini 5pin

Category: PLC I/O Modules

AC Drive, PowerFlex, with Embedded Ethernet/IP, Standard Protection, Forced Air, AC Input with DC Terminals, Open Type/Frame 1, 14 Amps, 10 Horse Power Normal Duty, 7.5 Horse Power Heavy Duty, 480 Volt AC, 3-Phase, Frame 1, Filtered, CM Jumper Installed (Preferred), DB Transistor, Blank (No HIM)

Category: 480 Volt AC Operated General Purpose Variable Frequency Drives

Relay, Control, 4 Pole, 10 Amp Rated, 24 Volt DC, Coil with Diode, 4 Normally Open Contacts

Category: IEC Contactors - Miniature

Wiring Module, Fusible, 5 Term. Per 8 Channel, Blown Fuse Indicator.

Category: PLC Analog IFM Blocks

Switch, Guardmaster, FerroGuard, Safety, Non-Contact, 24 Volt DC, 1 Amp, 2 Normally Closed, Safety Contact, Red Molded, ABS Plastic Housing, 4-Pin, Micro Quick Disconnect, FRS 20 Type

Category: Magnetic Detectors

Receptacle, DC Micro (M12), Straight Male, Straight Male, 8 Pin, 24 AWG PVC, IEC/US/Auto, IEC Color Code, PG9, 0.3 Meter (1 ft.),Standard Materials

Category: Cordset Mating Receptacles

Non-Fused Disconnect Switch. 80 Amp. Base and DIN Rail Mounted. 3-Pole AC. UL 508. For use with 6 mm Shafts and Handles. Integral Lug Kit Included.

Category: Base & DIN Rail Mount Non-Fusible Disconnect Switches

Busbar, Supply Module, 3-Pole, 54 mm Width, 10 - 1/0 AWG, Meets UL508A Spacing

Category: Modular Motor Control Supply Modules

Drive, PowerFlex 753, with Embedded I/O, Air Cooled, AC Input with DC Terminals, Open Type, 5 Amps, (Frame 1, 3 Horse Power Normal Duty, 2 Horse Power Heavy Duty / Frame 2, 3 Horse Power Normal Duty, 3 Horse Power Heavy Duty), 480 Volt AC, 3-Phase, Frame 2, Filtered, CM Jumper Installed, DB Transistor, Blank (No HIM)

Category: 480 Volt AC Operated General Purpose Variable Frequency Drives

Terminal Block, End Barrier, Gray, DIN Rail Mount, 50 per Pack

Category: Terminal Block End Sections

Compact Busbar, 64 Amp, 3 x 54 mm Spacing, For 140MT, C, D Frame with Right Side Auxiliary

Category: Manual Motor Protector Busbars

Switch, Cable Pull, Lifeline Rope Tensioner System, 6-P-Bolt, 15 meter

Category: Control Station Accessories

800F Pilot Light, Standard, Green LED, Green, Integrated LED, Metal, 24 V AC/DC, Metal Latch Mount Only

Category: Pilot Lights

800T PB, 30 mm Pilot Light, Full Voltage, Push-to-Test, LED, Blue Plastic Lens, 12-130 V

Category: Press-To-Test Pilot Lights

Panel Shroud, Busbar, 230 mm x 810 mm, Provides Isolation Between, Busbar and Panel, as per UL508A

Category: Modular Motor Control Panel Shrouds

Safety Interface, DriveGuard, Safe Torque-Off Board, User Installed, for PowerFlex 40P, PowerFlex 70

Category: VFD Safety Modules

Extension Shaft, 12 Inch, S Handle, For use with 140MT-SB or 140MT-SY

Category: Manual Motor Protector Enclosure Adapters

Conversion Module, SLC 500 To 5069, COMPACTLOGIX ,1746-OA16 To 5069-OA16

Category: PLC Communication Adapters

Terminal Block, 2 Circuit Mini Feed Through, 1.5 Millimeter, Gray

Category: 1.5mm Miniature Feed Through Terminal Blocks

Push Button, 22.5 mm, Flush, Momentary, 1 Normally Open, Contact Block, Green, Plastic, Screw Contact Block, Plastic Latch Mount,

Category: 22mm Flush Pushbutton Operators