Search results

ABB X50-B2-48-ND

Category: Enclosed Softstarters

ABB X125-B2-48-ND

Category: Enclosed Softstarters

IEC Contactors & Starters. Type 2 Coordination. C-2000 Starters. Maximum Amps: 30 - 43. Type LPJ-SP or AJT Maximum Fuse: 70. C-2000 contactors and starters have been tested and certified to meet IEC 947.4 Type 2 coordination when protected with the type ôJö fuses. ôType 2 coordination requires that, under short-circuit conditions, the contactor or starter shall cause no danger to persons or installation and shall be suitable for further use. The risk of contact welding is recognized, in which case the manufacturer shall indicate the measures to be taken as regards the maintenance of the equipment.ö (IEC 947.4).

Category: Overload Relays - Thermal Type

ELECTRONIC RELAY 30-150A

Category: Overload Relays - Electronic Type

22 - 32 Amp, IEC, Overload Relay, Type: Thermal Bi-Metallic, Trip Class 10. Selectable Manual or Automatic Reset. For use with A-Line Series, A/AE/AF50 - A/AE/AF75 Frame Contactors.

Category: Overload Relays - Thermal Type

Terminal Shroud for Compression Lugs. For use with PSS175/300 - 300/515 & PST175 - 300 Series Softstarters and A/AF210 - A/AF300 Series Contactors.

Category: Softstarter Terminal Shrouds

PSE Series Softstart (Compact Style.) Motor Voltage: 208V-600V AC. Control Voltage: 120V-240V AC. Normal Duty: 104 FLA (Full Load Amps). Heavy Duty: 80 FLA (Full Load Amps). Screw Mount. Includes: Digital Keypad, Optional FieldBus Communication, Overload Protection and By-Pass.

Category: Advanced Control Softstarters

Enclosed Softstarter, 300 Hp @ 480V, 361 Amp @ 480V, NEMA 4, PSTX Series, Extreme Duty. Includes: Thermal Magnetic CB, Emergency Bypass (AC3), Control Power Transformer, Start/Stop, H/O/A, 4-Wire Service Entrance Neutral Kit. 72”H x 72”W x 24”D.

Category: Enclosed Softstarters

Conversion Kits, Electrically Held Contactors to a Mechanically Held Version, 24 Volt AC Coil, 3-Wire, 1-Pole Auxiliary Contact

Category: Lighting Contactor Mechanical Hold Kits

PSTX AnyBus Adapter, DEVICENET

Category: Softstarter Communication Adapters

The softstarter PSTX85-690-70 has a rated maximum operational current of 85 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard.To interact with PSTX, it has a detachable full graphic display with IP66 and 4x outdoor rating.

Category: Advanced Control Softstarters

Lug Kit for PST175 - PST300 Series Sofstarters. Wire Range: # 4 - 400 MCM (1 Per Phase).

Category: Starter & Contactors - Terminal Lug Kits

(3) Terminal Lugs. Wire Range: 2/0 - 500 MCM. For use with AF Series, AF580 - AF1250 Frame Contactors. (Set of 3 lugs w/ 3 2/0-500mcm holes)

Category: Starter & Contactors - Terminal Lug Kits

Softstarter PSTX30-690-70 has a rated maximum operational current of 30 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

PSR Series Softstart (Compact style). 34.0 FLA (Full Load Amps). Motor Voltage: 208V - 600V AC. Control Voltage: 120V - 240V AC. Din-Rail/Screw Mountable. Requires: TA42 Series Overload Protection & DB80 Series Mounting Kit.

Category: Basic Control Softstarters

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Normal Duty: 720 FLA (Full Load Amps). Heavy Duty: 590 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 15" W: 17" D: 15" Weight: 103Lbs. 36 Inch Width, 60 Inch Height, 16 Inch Depth ** ASSOCIATED LUG KIT REQUIRED **

Category: Advanced Control Softstarters

Softstarter PSTX142-690-70 has a rated maximum operational current of 142 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

PSR Series Softstart (Compact style). 46.2 FLA (Full Load Amps). Motor Voltage: 208V - 600V AC. Control Voltage: 120V - 240V AC. Din-Rail/Screw Mountable. Requires: TA75 Series Overload Protection & DB80 Series Mounting Kit.

Category: Basic Control Softstarters

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Motor/Supply Lugs 6 - 2/0 AWG . Normal Duty: 42 FLA (Full Load Amps). Heavy Duty: 34 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. Weight: 10Lbs. 6 Inch Width, 12 Inch Height, 8 Inch Depth

Category: Advanced Control Softstarters

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Normal Duty: 142 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. H: 14.8" W: 7.8" D: 9.3" Weight: 15Lbs. 8 Inch Width, 15 Inch Height, 11 Inch Depth ** Qty 2 OF ASSOCIATED LUG KIT REQUIRED **

Category: Advanced Control Softstarters

40 Amp, 3-Pole, Definite Purpose Contactor, 600V Rated, Lug Terminals, 480V AC Coil.

Category: 3-Pole Definite Purpose Contactors

Conversion Kits, Electrically Held Contactors to a Mechanically Held Version, 12 - 28 Volt DC Coil, 3-Wire, 2 x 1-Pole Auxiliary Contact

Category: Lighting Contactor Mechanical Hold Kits

Softstarter PSTX60-690-70 has a rated maximum operational current of 60 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

PSE Series Softstart (Compact Style.) Motor Voltage: 208V-600V AC. Control Voltage: 120V-240V AC. Normal Duty: 169 FLA (Full Load Amps). Heavy Duty: 130 FLA (Full Load Amps). Screw Mount. Includes: Digital Keypad, Optional FieldBus Communication, Overload Protection and By-Pass. ***Lugs Required, See Associated Items For Lugs***

Category: Advanced Control Softstarters