Search results

Steel, 1-Gang, Tap-Off Fitting, 3000 Series. Size: 4-3/4" Length. Color: Gray.

Category: 1-Gang Raceway Box Covers & Faceplates

For branching raceway at right angles. Three couplings included. Finish - Ivory

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Has 1 1/4", 1 1/2" and 2" trade size KOs in back and on each side. Ivory

Category: Large 2-Piece Metallic Raceway Elbows

2-Gang, Floor Box Assembly, Color: Nickel. Includes (2) 15A/125V Tamper Resistant Duplex Receptacles and (4) Screw Plugs

Category: Assembled Recessed Gang Boxes

WMD ALDS4047F ALDS4000 SINGLE

Category: Large 2-Piece Metallic Raceway Cover Plates

3' [914mm] length with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] steel housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. Each USB module provides 2 ports with 2.4 Amps of shared charging. Please note the charging load on one module will not affect the charging performance of the other USB modules in the product.

Category: Single Circuit Steel Plugmold

For covering seam where two pieces of 5500BD3 Base come together Ivory

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Accepts standard 15A and 20A duplex receptacles. NOTE: For RFB4-SS Series Floor Boxes only. For use on tile, terrazzo, carpet, or wood covered floors. Additional configurations available. Please consult your local Sales Representative for more information.

Category: Recessed Floor Box Service Fittings

Non-Metallic, 1-Gang, Sure Snap Device Box, NM2000 Series. Size: 4-3/4" Length, 3" Width, 1-3/4" Depth. PVC, Fog White.

Category: Plugmold Device Boxes

Two-gang. For standard 30A, 50A, and 60A receptacles. Four sides of cover have one set of combination twistouts for 3000 Series Raceway. Hole cut in cover: 3 3/4" x 2 7/8" (95mm x 73mm). Base has five 1/2" trade size KOs. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Ivory

Category: 2-Gang Raceway Device Boxes

WMD CMK50 CORDMATE II CABLE M

Category: 1-Piece Metallic Raceway Kits

PN10 Series For closing open end of raceway. Finish - White

Category: 1-Piece Non-Metallic Raceway End Fittings

For branching of 2900 Series Raceway running at right angles. Maintains 1 1/4" (32mm) bend radius when installing UTP and fiber optic cable. Ivory

Category: 1-Piece Non-Metallic Raceway Tee Fittings

5' [1.5m] length with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] steel housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. Each USB module provides 2 ports with 2.4 Amps of shared charging. Please note the charging load on one module will not affect the charging performance of the other USB modules in the product.

Category: Single Circuit Steel Plugmold

6IN TILE SHIMS

Category: Poke-Through Mounting Plates

Steel, 2-Gang, Device Box, 3000 Series. Size: 2-3/4" Depth. Gray.

Category: 2-Gang Raceway Device Boxes

Four-Gang Cover, Four Duplex Openings, 4000 Series Raceway, Gray

Category: 4-Gang Raceway Box Covers

Non-Metallic, Device Bracket, 40N2 / 60N2 Series. Size: 5-1/4" Length, 2-3/16" Width. For use with Ortronics TracJack Individual Jack System, Ortronics Series II Front-Loading Module System, and Wiremold Open System Communications Modules. Color: Ivory.

Category: 2-Piece Non-Metallic Raceway Covers

Plug-In Outlet Center Unit, Length: 48 Inch, 15' Cord, 16 Outlets, Lighted Switch.

Category: Work Surface Power Centers

Accepts rectangular, GFCI, Surge, and Decorator style devices. Does not accept 5507 Series Faceplates. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Gray

Category: 4-Gang Raceway Box Covers

Accepts shallow-type 30A and 50A devices and flush plates. Also Fustat devices SRU, SSU, SRW, SOU and SOW, or equivalent. Deeper devices can be accommodated with a combination of G3051LE and any of the V5700 Series single-gang, open base boxes. G3007C Device Bracket included.

Category: 1-Gang Raceway Device Brackets & Plates

All communication device accepts up to eight UTP, fiber optic, audio, or video connectors. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL) and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with brass colored nonmetallic cover (AB). Includes adapters to accept eight (8) Ortronics TracJack modular jacks, four (4) Ortronics Series II modular jacks, or Wiremold Open System adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AMD8 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Assembled Poke-Through Units

Complete with one-piece finish flange and conduit assembly with one 3/4" and two 1/2" trade size conduit adapters and closure plugs. Colors available in painted gray (GY), painted black (BK), brushed aluminum (AL), and plated brass (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC7AFFTC Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Anodized Aluminum

Category: Assembled Poke-Through Units

WMD CM-DFP-WH CM SERIES DOUBL

Category: Communication Module Adapters For Metallic Raceway