Search results

Grinder/Cut-Off, M18, Cordless, RPM: 8500, Wheel Diameter: 4-1/2", Voltage: 18, Weight: 5.8 lbs, Includes: Flange Nuts, Wheel Guard, Spanner Wrench, Side Handle, Grinder/Cut-Off Tool.

Category: Cordless Grinders

3m(tm) Fire Barrier Sealant Ic 15wb+, 4.5 Gallon, Pail, 1/case

Category: Fire Barrier Caulking

Spring Assisted , Stainless Steel Blade Stays Sharp, Slide Lock Secures Blade

Category: Folding & Lockback Knives

Generates 13A Corded Power, Under 3 Second Brake, 6" Grinding Capacity

Category: Cordless Grinders

6-in-1 Diagonal Pliers, High Leverage, Offset Head, Length: 7", Application: Reaming, Bolt Cutter (#6, #8), Nail Cutter, Nail Pulling, Wire Cutting, Staple Pulling, Reaming Capacity: 1/2" to 1" Pipe

Category: Diagonal Cutting Pliers

The 3M™ Cold Shrink Splicing Products are designed using the proprietary cold shrink delivery system developed by 3M. Products are supplied prestretched on a removable core for efficiency and ease of installation. 3M™ Cold Shrink Splices 5740 Series are used for single conductor, non-shielded 5/8 kV cables.Each kit is a cold shrink design and contains enough material to insulate three splices. Connectors are not included and must be ordered separately.Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Category: Medium Voltage Cold Shrink Splice Kits

25Ft Magnetic Tape Measure Anti-Tear Coating Reduces Tape Tear

Category: Tape Measures & Rulers

EXACT™ Rapid Reset 3/4" Draw Stud Set, Fastest, Easiest, Reset: Turn Ball Pull 1/4 Turn To Release, For Use With Milwaukee® Quick Connect System, For Use With Exact™ 3/4" - 2" Punches and Dies

Category: Draw Studs

Step Drill Bit Set - 4PC, Includes: (1) #7 Step Drill Bit, 7/8" Single Hole (48-89-9207), (1) #4 Step Drill Bit, 3/16" - 7/8" by 1/16" (48-89-9204), (1) #12 Step Drill Bit, 7/8" - 1-3/8" (48-89-9212), (1) #1 Step Drill Bit, 1/8" - 1/2" by 1/32" (48-89-9201) & (1) Carrying Case

Category: Step Bit Kits

Hard Hat, White, 4-Point Ratchet Suspension, Unvented

Category: Hard Hats

M12™ Variable Speed Polisher/Sander Kit, Variable Speed Trigger, Sanding RPM: 0-8,300 RPM, Polishing RPM: 0-2,800 RPM, Includes: (1) M12™ Variable Speed Polisher/Sander (2438-20), (1) M12™ Lithium-ion Battery Charger (48-59-2401), (1) M12™ XC High Capacity REDLITHIUM™ Battery (48-11-2402), (1) M12™ REDLITHIUM™ CP1.5 Battery Pack (48-11-2401), (1) 5 PC Accessory Pack: (1) 3" Polishing Backing Pad; (1) 2" Sanding Backing Pad; (1) Wool Pad; (1) Yellow Foam Pad; (1) White Foam Pad, (1) Side Handle & (1) Carrying Case

Category: Cordless Grinders

3MÖ Cold Shrink QT III 7600 T 3G Series Termination Kit includes a non skirted, 3 phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield« power cables. The silicone rubber sealing compounds allow the termination to withstand voltages of 5 to 35kV.

Category: Medium Voltage Indoor Cold Shrink

H24M Universal Headgear for Hard Hat, Blue, Aluminum

Category: Protective Eyewear Accessories

15,000 Lumens Of Trueview™ High Definition Output , Exceeds Floor Coverage Of 400W Metal Halide Above 12’ Install Height, Reducing Quantity Of Lights Needed , Integrated Wiring Terminal, Accepts 120V-277V

Category: Lantern Flashlights

Heat Shrink Tubing For Bus Bar, Circumference: 6.67 - 10.86 Inch, Color: Red, Rated 5 - 35kV, Material: Cross-Linked Polyolefin, For Insulating Rectangular, Square, or Round Bus Bar, 20 Foot Roll.

Category: Bus Bar Heat Shrink Tubing

Adapt To Your Jobsite, BOLT™ Reversible Headlamp Mount & Marker Clip Slots, Four BOLT™ Accessory Slots and Two Universal Accessory Slots

Category: Hard Hats

314D Lightweight Utility Closed Coated Abrasive Roll, 50 YD L x 1 IN W, 120 Grit, Fine Grade, Maroon

Category: Abrasives

SecureFit 400 Eye Protection, Multi-Pack, Clear, Gray, Mirror, Anti-Fog, 3-Pack

Category: Half Frame Protective Eyewear

25Ft Wide Blade Magnetic Tape Measure Anti-Tear Coating Reduces Tape Tear, Includes (2) Tape Measures

Category: Tape Measures & Rulers

3M™ SecureFit™ 400 Series Safety Glasses SF416XAS-BLK, Gray/Black, Orange Mirror Anti-Scratch Lens, 20 ea/Case

Category: Half Frame Protective Eyewear

M18 FUEL 1/4" Hex Impact Driver Kit, (1) M18 FUEL™ 1/4" Hex Impact Driver (Tool Only) (2753-20), (1) M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack (48-11-1850), (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812)

Category: Cordless Heavy Duty Impact Drivers

Ring Tongues, Vinyl-Insulated, Wire Range: 12 - 10, Stud Size: 1/4, Color: Yellow, 50/PK

Category: Vinyl Insulated Ring Tongues

Heat Shrink, Thin Wall, Flexible Polyolefin Tubing, 600V, Color: Clear, Shrink Ratio: 2:1, Size: 3/4", Expanded Insulation Diameter: .750 Inch, Recovered Insulation Diameter: .375 Inch, Tube Length: 200 ft Spool . Provides: Flame, Moisture and Abrasion Protection in Stain Relief and Wire Bundling Applications.

Category: Thin Wall Heat Shrink

Moon Dawg™ Protective Eyewear, Indoor/Outdoor Mirror Anti-Fog Lens, Black Plastic Frame, Polycarbonate Lenses Absorb 99.9% UV

Category: UV / UVB Protective Eyewear