Search results

Conduit Locknut, 2 Inch Diameter, Steel With Zinc Finish, For Use With Rigid/IMC Conduit

Category: Steel Conduit Locknuts

Standard Cable Tie, 5-1/2 IN L x 0.14 IN W x 0.05 IN THK, Nylon/Polyamide 6.6

Category: Non-Releasable Cable Ties

Waterpipe Ground Clamp for Wire Range 4 - 4/0, Water Pipe Size 1 1/4 - 2 , Bronze Saddle with Steel U-Bolt

Category: U-Bolt Ground Clamps

Grounding Bushing With Aluminum Lug, Insulated, Threaded, 1 Inch Diameter, 14 - 4 AWG, Iron With Zinc Finish, For Use with Rigid/IMC Conduit

Category: Threaded Ground Bushings

Conduit Hanger W/ Bolt, Hex Nut, 1/2 x 3/8-1/2 IN, Steel, Electro-Galvanized

Category: Conduit Clamps

Erickson Coupling, Aluminum, 3/4", For Use with Rigid/IMC Conduit

Category: Aluminum Rigid Conduit Three Piece Unions

Steel City® HS-102 1-Hole Pipe Strap, 3/4 in, For Use With IMC/Rigid Conduit, Steel, Zinc Plated

Category: Steel 1-Hole Conduit Straps

Male (One Load) Copper Motor Pigtail Disconnect, 12-10 AWG, Body Size 1, Die Color Code Yellow

Category: Copper Pigtail Adapters

Innerduct, Riser-Gard, Non-Metallic Pliable Raceway, 1-1/4", 1600' Reel, Orange, for use in Riser and General Purpose Applications

Category: HDPE Innerduct

Copper Compression Lug with Sight Hole, Conductor Size: 2/0 AWG, 1-Hole Stud, Stud Diameter: 3/8". Color-Keyed: Black, Die Code: 45.

Category: 1-Hole Copper Compression Lugs

FS Device Box, Shallow, 1-Gang, 1/2 Inch Hub, Dead-End, Die Cast Aluminum, Raintight When Used With Appropriate Cover

Category: 1-Gang Aluminum FS & FD Device Boxes

Ranger Strain Relief Straight Liquidtight Cord Connector 3/4 IN Trade, 1/8-1/4 IN Openings, Die Cast Zinc

Category: Straight Die Cast Zinc Cord Grips

2-1/4" Round, Drop-In Floor Box Assembly, Non-Metallic, Cover Type: Screw Plug. Device Type: Single Receptacle, Data Port or Blank. Color: Brass. Cubic Inches: 11.8". Includes: Hole Saw Bit, (1) Single Grounded Receptacle.

Category: Assembled Recessed Round Boxes

Copper Compression Lug with Sight Hole, Conductor Size: 4 AWG, 1-Hole Stud, Stud Diameter: 3/8". Color-Keyed: Gray, Die Code: 29.

Category: 1-Hole Copper Compression Lugs

Liquidtight Connector, 45 Degree, 3/8 Inch, Insulated, Malleable Iron

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

Bulkhead Fitting, 3/4 Inch, Insulated Throat, Nitrile Sealing Ring, Zinc, For Use With Rigid/IMC Conduit

Category: Die Cast Through-Bulkhead Conduit Hub Fittings

3/4 Inch Liquidtight Flexible Metal Conduit (LFMC), Type HCX - Extreme (High/Low) Temperature, -76°F to +302°F (-60°C to +150°C), Zero Halogen, Black, 100 Foot Coil, Galvanized Steel Core, Thermoplastic Rubber (TPE) Jacket, UV Resistant, Extra Corrosion Resistant, Oil Resistant

Category: Liquidtight Flexible Metallic Conduit

1/2 Inch Blue Electrical Non-Metallic Tubing (ENT), 10 Foot Piece

Category: Blue ENT Conduit

Wire Marker Book, Vinyl Cloth, (10) Each, 0-9, T1, T2, T3, L1, L2, L3

Category: Wire Marker Booklets

Thin-Wall Heat Shrinkable Tubing, Black Cross-Linked Polyolefin, 1/2 Inch, Shrink Ratio 2:1, Length 25-Foot Reel, Operating Temperature -55 to 135 Degrees Celsius, Non-Lined

Category: Thin Wall Heat Shrink

Ring Terminal, Nylon Insulated, 12 to 10 AWG, # 10 Stud, 600 Volt, Yellow, Military Specified MS25036-112, Package of 500 EA

Category: Nylon Insulated Ring Tongues

RC Series Insulated Fork Terminal, 12-10 AWG, 1.09 IN L, Brazed Seam/Serrated Barrel, Copper, Yellow

Category: Vinyl Insulated Standard Fork Terminals

Non-Metallic Sheathed Cable Connector, Two Screw Clamp Type, Diameter 3/8 Inch, Cable Range 0.180 - 0.640 Inch, Zinc Die Cast

Category: Zinc Die Cast NM Cable Connectors

Copper Compression Lug with Sight Hole, Conductor Size: 6 AWG, 1-Hole Stud, Stud Diameter: 5/16". Color-Keyed: Blue, Die Code: 24.

Category: 1-Hole Copper Compression Lugs