Search results

Insulated Compression Connector, 3/4 IN Trade, Use With EMT Conduit, Steel, Zinc Plated

Category: Steel Concrete Tight EMT Compression Connectors

Metal-Clad and Armored Cable Fitting, Straight, Trade Size 3/8 Inch, Knockout Size 1/2 Inch, Cable Range 0.370 to 0.500 Inch, Steel with Zinc Plating, Nylon Insulated

Category: Single Barrel MC / AC Connectors

Load Center, Door Lock, NEMA 1, Large than 12 Circuits, Does Not Fit TPL412

Category: Load Center Door Latches & Locks

Breaker, 225 Amp, 240 Volt AC, 3-Pole, Lug In , Lug Out, Molded Case, 10 kAIC

Category: 240-277V Rated Molded Case Circuit Breakers

ABB XT4NU3225AFF000XXX XT4N 2

Category: 600V Rated Molded Case Circuit Breakers

2 IN Pipe Strap, Malleable Iron, Electro Galvanized Finish, Use With Rigid/IMC Conduit

Category: Malleable Iron 1-Hole Conduit Straps

ABB KXTAAXCQSYFP AUX

Category: Molded Case Circuit Breaker Auxiliary Switches

Compression Lug, 1-Hole, Copper, 4/0 AWG, 5/16" Stud Size, Purple

Category: 1-Hole Copper Compression Lugs

Rigid Conduit Strap, 2-Hole, 3 Inch, Steel, For Use With Rigid/IMC Conduit

Category: Steel 2-Hole Conduit Straps

Disconnect Switch, 100 Amp, 600 Volt AC, 3-Pole, Non-Fusible, NEMA 5/12, Heavy Duty

Category: 3-Pole 600 Volt Non-Fused Heavy Duty Safety Switches

Designed for commercial and industrial applications where safety, high performance and continuity of service are essential. Listed to UL standard 98 enclosed and dead front switches. Suitable for use as service equipment when installed in accordance with the National Electrical Code. Certified to CSA standard 22.2 no. 4-04 enclosed and dead front switches. Meets or exceeds NEMA KS1 standard for enclosed switches, type HD. Fusible and non-fusible switches available (consult BuyLog for interrupt ratings). Quick-make, quick-break mechanism. 60/75 C conductor rating. Full cover interlocks. TH337086

Category: 3-Pole 600 Volt Fused Heavy Duty Safety Switches

Ground Clamp, 1/2" to 1"

Category: Bare Wire Ground Clamps

Tb 60267 Connector Compressio

Category: 2-Hole Aluminum Compression Lugs

Breaker, Spectra Series, Mounting Module, 600 Amp, 3-Pole, TEY Frame, Dual Mount

Category: Circuit Breaker Mounting Kits

Mechanical Lug, 6-Conductor, 10-Hole Mount, Aluminum, 1/0 AWG - 750 MCM

Category: Aluminum Panelboard Lugs

Disconnect Switch, Class R Fusing Kit, 30 Amp, 600 Volt AC, Type TH, NEMA 4/4X/12

Category: Safety Switch & Disconnect Fuse Adapter Kits

Panel Board, Front Trim, 43-1/2 Inch x 20 Inch, A Series, Flush, Door within Door

Category: Panelboard Trims

THB RB877M INS VIN RNG TRM 18

Category: Vinyl Insulated Ring Tongues

THB TY25M-4 CABLE TIE 50LB 7I

Category: Non-Releasable Cable Ties

Lighting Contactor, Enclosure, NEMA 1, Large

Category: Starter & Contactors - Enclosures

1/2 Inch Wire Mesh Grip Assembly, Pack of 10

Category: Stainless Steel Strain-Relief Grips With Mesh

Contactor, Lighting, 30Amp, 2-Pole, 120 Volt AC Coil, Hand-Off-Auto Switch, NEMA 1 Enclosure

Category: Enclosed Lighting Contactors

Coupling, Compression, Conduit Size 1/2 Inch, Length 1-1/2 Inch, Width 1-3/32 Inch, Die Cast Zinc

Category: Die Cast EMT Set Screw Couplings

q Line Circuit Breakers Are One-inch Wide Per Pole, Compact, Thermal-magnetic Devices Designed For Residential And Commercial Applications. The Ql Breakers Areplug-in Versions Of The Q Line Used For Connection To Load Centers And Lightingpanels. All Q Line Circuit Breakers Feature Quick-make / Quick-break Mechanisms,common Trip Bars, And Easy To Spot Trip Indication To Ensure Safety And Reliability. Q Line Breakers Are Available In 1, 2, And 3 Pole Versions, Can Be Orderedwith Auxiliary Contact And Shunt Trip Accessories, And Can Be Ordered For Use Inhid Applications.

Category: Residential 2-Pole Circuit Breakers