Search results

ABB OZXA-24/3P 3P LUG KIT 100

Category: Disconnect Switch Lug Kits

Breaker, 35 Amp, 3-Pole, 480 Volt AC, 250 Volt DC, 5 kAIC, Molded Case, Thermal Magnetic

Category: 480V Rated Molded Case Circuit Breakers

Transformer, Dry Type, Encased, 0.5 KVA, 277 - 120/240, 1-Phase

Category: 251 - 999 VA Dry Type Transformers

1-1/4 Inch, Steel Grounding Locknut, For Use with Rigid/IMC Conduit

Category: Steel Conduit Locknuts

Mechanical Lug, 1-Conductor, 2-Hole Mount, Aluminum, 6 AWG - 350 MCM, 1/2" Bolt Hole Size, Dual-Rated for Copper & Aluminum Conductors

Category: 1-Conductor Aluminum Mechanical Lugs

GE TED136050 3 POLE 600VAC 5

Category: 600V Rated Molded Case Circuit Breakers

Lighting Contactor, 4-Pole, Normally Open/Normally Closed, 120 Volt AC Coil, Open

Category: Open Lighting Contactors

2 Inch. Flash Plate. Roof Flashing For 2 Inch Conduit.

Category: Flashing - Steel Type

100 Amp, 2-Pole, 2-Wire, Heavy Duty Safety Switch, Non-Fusible, 600 Volt DC, NEMA 1

Category: 2-Pole 600 Volt Non-Fused Heavy Duty Safety Switches

J-Line Receptacle Watertight (Screw Cover), Reverse Service, 100 Amp, 3 Pole 4 , with 1.5 Inch Bushing I.D.

Category: 100 Amp Pin & Sleeve Receptacles

Transformer, Fuse Clips, Top Mount, Dual, 13/32 Inch x 1-1/2 Inch, Class CC, with Single, 13-32 Inch x 1-1/2 Inch, Midget Fuse

Category: Transformer Primary Fuse Kits

Pilot Device, Enclosure, Painted Steel, 4 Hole, Vertical, NEMA 1/3/3R/12/13

Category: Steel Pilot Device Enclosures

THQP breakers are a smaller, smarter solution for today's cost- and quality-conscious contractors and homeowners. Half the width and identical in design in comparison to standard breakers, they allow use of smaller load centers and for maximum savings of space and money. GE is the only manufacturer that gives you this cost advantage without sacrificing flexibility. The THQP135 breaker features a 1/2" width, 1 pole, an ampere rating of 35 A, an interrupting rating of 10kAIC, and a voltage rating of 120/240V.

Category: Residential 1-Pole Circuit Breakers

Panel Board Interior, 400 Amp, 480/277 Volt AC, 3-Phase, 42 Circuits, Copper Bus, 64.5 Inch Box/Front Height, Non-Feed Through

Category: Panelboard Interiors

Starter, Magnetic, NEMA Size 3, 3-Phase, 34 Volt AC Coil, 600 Volt AC, 90 Amp Rated, Open, with Auxiliary Contacts

Category: NEMA Size 3 Open Motor Starters

Compression Lug, 1-Hole, Short Barrel, Copper, 1-Conductor, 3/0 AWG, 1/2" Stud Size, Color Coded Orange

Category: 1-Hole Copper Compression Lugs

Load Center, 200 Amp, Main Lug, 18 Circuit, 3-Phase, 208Y/120 Volt AC, 65 kAIC, NEMA 1 Enclosure, Combo

Category: 3-Phase Main Lug Copper Bus Load Centers

THB ADR25-32 AL 3CNDTR 2HOLE

Category: 3-Conductor Aluminum Mechanical Lugs

Q line circuit breakers are one-inch wide per pole, compact, thermal-magnetic devices designed for residential and commercial applications. The QB breakers are bolt-on versions of the Q Line used for bolting to the bus connections of load centers and lighting panels. All Q Line circuit breakers feature Quick-make / Quick-break mechanisms, common trip bars, and easy to spot trip indication to ensure safety and reliability. Q Line breakers are available in 1, 2, and 3 pole versions, can be ordered with auxiliary contact and shunt trip accessories, and can be ordered for use in HID applications. 0ST1 Amps 40 A

Category: Bolt-On Shunt Trip Circuit Breakers

GE CR324CXFS SIZE 1 SS OL 3.2

Category: Overload Relays - Electronic Type

Load Center, 200 Amp, Main Lug, 18 Circuit, 3-Phase, 208Y/120 Volt AC, 65 kAIC, NEMA 3R Enclosure

Category: 3-Phase Main Lug Copper Bus Load Centers

Aircraft Butt Connector, Nylon Insulated, 22 - 18 AWG, Red, Pack of 500

Category: Nylon Insulated Butt Connectors

3/4" Liquidtight Knockout Plug, Neoprene. For use with Flexible Metal Conduit.

Category: Non-Metallic Knockout Seals

Spectra Series Panelboards. Renewal Parts. Circuit Breaker Mounting Modules Plug-In Spectra? 3-pole. Mounting Hardware. Use to mount main or branch circuit breakers into panelboard. Breakers bolt on to the mounting modules. FP suffix indicates that all AFP filler plates, with cutouts for handles, are included to fit all applicable box widths. On double branch modules, filler plates to cover any unused breaker poles are also included. SE and SF breakers located adjacent to a fusible switch, PCU or TVSS require mounting modules suitable for mounting ?Adjacent to Switch.?. SGDA circuit breaker rated 400 amps maximum. Circuit breakers not included in module price. Includes all necessary hardware. Breaker Frame - SFHA or SFLA or SFPA. Maximum Breaker Amperage - 250A. 3 Pole.

Category: Circuit Breaker Mounting Kits