Search results

Compression Lug, Copper, 1-Hole, Standard Barrel with Window, Narrow Tongue, #6 AWG Wire, #6 Stud Hole

Category: 1-Hole Copper Compression Lugs

Mini Com rectangular adapter, mounts behind standard GFCI faceplates, accepts one Mini-Com® Module, White.

Category: Snap-In Wallplate Inserts

Category 6A, 10 Gb/s S/FTP patch cord with TX6A™ 10Gig™ Modular Plugs on each end. Blue, 7 ft.

Category: Category 6 Patch Cords

Thermal transfer component label, 2.00" W x 0.50" H, polyester, white, 1 label/row, 5000 pc. package quantity.

Category: Permanent Labels

Male Disconnect, Nylon Insulated, 12 - 10 AWG, Tab: 0.250 x 0.032 Inch, Color: Yellow, Material: Copper, Package of 500 Each.

Category: Male Nylon Insulated Wire Disconnects

Heat Shrink, Thin Wall, Cross-Linked Polyolefin, 600 Volt, Color: Assorted Colors Shrink Ratio: 2:1, Size: 3/8 Inch, Expanded Insulation Diameter: .375 Inch, Recovered Insulation Diameter: .187 Inch, Tube Length: 6 Inch Piece. Provides: Flame, Moisture and Abrasion Protection

Category: Thin Wall Heat Shrink

Ring Terminal, Nylon Insulated, 16-12 AWG, #10 Stud Size, Heavy Duty

Category: Nylon Insulated Ring Tongues

Continuous Tape, Dimensions: 0.38 inch x 100 feet, Color: White, Material: Polyolefin

Category: Labeling Tape

Cable Tie, 7.4" Length, 6/6 Nylon, Natural Color, 50lb Tensile Strength, 100 per Pack

Category: Non-Releasable Cable Ties

StructuredGround™ Grounding Strip, 45RU, Threaded Rail

Category: Cable Tray Mounting Hardware

Double gang two-piece screw together outlet box. Box accepts Pan-Way« Screw-On Faceplates or any NEMA standard double gang faceplates. For use with Pan-Way« LD profile raceway. 5.05"L x 5.05"W x 1.62"H (128.2mm x 128.2mm x 41.1mm). Breakouts for 1/2" or 3/4" diameter conduit.

Category: 2-Gang Raceway Device Boxes

Braided Expandable Sleeving, 0.50" diameter (12.7mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, black, Flame Retardant, Polyethylene Terephthalate, 500 ft. per reel

Category: Braided Expandable Sleeving

Compression Lug, Copper, 1-Hole, Standard Barrel with Window, Narrow Tongue, 4/0 AWG Wire, 1/4 Inch Stud Hole

Category: 1-Hole Copper Compression Lugs

Pre-Configured Network Zone System, 24" x 36", mild steel enclosure, for two industrial switches, includes (16) Cat 6A STP copper patch cords, (4) MM LC fiber patch cords with (6) adaptors, backplane and cable management.

Category: Pre-Configured Media Center Enclosures

Crimp dies for CT-3001 tool, 300 kcmil.

Category: Wire Crimping Dies, Adapters, & Blades

VeriSafeGäó AVT device automates and simplifies the process of absence of voltage verification testing. Includes AVT test device equipped with 10 ft. Sensor leads, 2 ft. System cable, and industrial Lithium battery.

Category: Absence of Voltage Testers

Compression Lug, Copper, 1-Hole, Flex, 650 kcmil Cable, 1/2 Inch Stud Hole

Category: 1-Hole Copper Compression Lugs

Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Off White, 10m.

Category: Category 6 Patch Cords

Compression Lug, Copper, 1 Hole, Flex, 4/0 AWG Wire, 5/8 Stud Hole., 90° Angle Tongue

Category: 1-Hole Copper Compression Lugs

Continuous vinyl tape, 4.00 wide x 100' length, black, 1 pc. package quantity

Category: Labeling Tape

Fixed diameter cable clamp, heavy duty, #10 screw (M5), 1.50" (38.1mm) bundle, white.

Category: Cable Clamps & Clips

SC APC FAP loaded with six SC APC duplex singlemode fiber optic adapters (Green) with zirconia ceramic split sleeves.

Category: SC Fiber Distribution Plates

Cable marker strap, standard cross section, 15.3 (387mm) length, red.

Category: Cable Straps

Category 6A Performance, 28AWG, F/UTP Patch Cord, CM/LSZH, International Gray, 1.5m.

Category: Category 6 Patch Cords