Search results

Compression Lug, Copper, 2-Hole, Long Barrel with Window, #8 AWG Wire, #10 Stud Hole, .63 Hole Spacing

Category: 2-Hole Long Barrel Copper Compression Lugs

Pre-Printed WM Card, Legend = 18, Vinyl Cloth, 0.25"

Category: Wire Marker Cards

Copper parallel splice, red.

Category: Non-Insulated Butt Connectors

The Panduit Two-post Rack System provides a reliable foundation for mounting telecommunication and data center equipment. The modular rack can be used to manage high performance copper and fiber patch cables using Panduit horizontal and vertical cable man

Category: Floor Mount Racks

The Panduit Deep Mount 4 Post Rack Shelf uses equipment mounting flanges to support large networking equipment. For use with R4P style 4 post racks. Steel, 1 RU, Black, 1pc, 36in deep.

Category: Rack Shelves

Flexible Slotted Wiring Duct, 1.97" W x 1.97" H x 19.7" Long, Polypropylene, Gray

Category: Special Purpose Wire Duct

Blank Self-Laminating Write-On Cable Marker Books are vinyl and laminated to protect handwritten legends in difficult environments. 6.0in x 1.0in, 30 markers per book, White.

Category: Wire Marker Booklets

Tee fitting for use with LDPH3 and LDS3 raceway, White, ABS, Length 2.23 in.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Category 6 Performance, 28 AWG UTP patch cord with TX6™ Modular Plugs on each end. Green, 8 in.

Category: Category 6 Patch Cords

Component label, P1 Cassette, 2.00" W x 1.00" H, polyester, white, 200 labels/cassette, 1 pc. package quantity.

Category: Permanent Labels

Hinged duct cover, 3 W x 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Wire Duct Covers

Panduct Wide Slot Wiring Duct, Type G, 2.25" W x 4.10" H x 6' L, Lead Free PVC, Gray, Aluminum Foil Shield, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Cable Tie, Miniature, Nylon, Natural, 3.1" Long, 100/PK

Category: Miniature Cable Ties

Cable Tie, 14.5", Nylon, Standard Cross Section, Orange, Pack of 1000

Category: Non-Releasable Cable Ties

Category 6A Performance, 28AWG, UTP Patch Cord, CM/LSZH, Blue, 6ft.

Category: Category 6 Patch Cords

The cable tie plate in natural color is applied with #10 (M5) screws. It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in indoor environments. It is used with miniature, intermediate, and standard cable

Category: Cable Tie Marker Plates

Spiral Wrap, offers abrasion protection for wires, cables, hoses and tubing, .50" (12.7mm) x 100' outside diameter, weather resistant polypropylene, black.

Category: Spiral Wrap - Black

Compression Lug, Copper, 1-Hole, Standard Barrel with Window, Narrow Tongue, 3/0 AWG Wire, 5/16 Inch Stud Hole

Category: 1-Hole Copper Compression Lugs

Thin wall heat shrink, 1" (25.4mm) diameter, yellow/green cross-linked polyolefin, 100 ft. (30.5m) per reel.

Category: Thin Wall Heat Shrink

Pan-Ty® locking tie, miniature cross section, 4.0" (102mm) length, nylon 6.6, slate.

Category: Miniature Cable Ties

The cable management finger kit is designed to be used in any 42 RU or 45 RU, S-Type or N-Type cabinet. It is 14.1" H by 6.8" W by 6.8" D and is black.

Category: Rack Mounting Kits & Hardware

White on black, vinyl tape, 0.38".

Category: Labeling Tape

Braided Expandable Sleeving, 0.25" diameter (6.4mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, black, Flame Retardant, Polyethylene Terephthalate, 200 ft. per reel.

Category: Braided Expandable Sleeving

Category 6A, 10 Gb/s S/FTP patch cord with TX6A™ 10Gig™ Modular Plugs on each end. International Gray, 15 meters.

Category: Category 6 Patch Cords