Search results

Panduit Contour-Ty® Cable Ties are designed to provide consistent strength in high-vibration environments. Plus, with a low-profile head and parallel entry design, the tip enters easy and stays snug and snag-free. And with Weather Resistant Nylon 6.6 mate

Category: Non-Releasable Cable Ties

Network label, P1 cassette, 3.79" W x 0.30" H, polyolefin, white, 75 labels/cassette, 1 pc. package quantity.

Category: Permanent Labels

Used to fully enclose 12x4 channel in conjunction with the spill-over junction FRSPJ2X2YL. Cover snaps onto the channel base. Hinged feature allows easy access to add or remove cables.

Category: Drop-Offs, Spillouts & Outlets

M5 Panduit Screw with Cage Nuts are ideal for square-hole equipment rails on 4 post racks and cabinets. Cage nuts are removable and replaceable to best fit your networking needs. Steel, Black, 0.59L (15.0mm), 100pc.

Category: Enclosure Clip / Clamp Nut Packages

Thermal transfer component label, 4.00" W x 3.00" H, super-tack polyester, white, 1 label/row, 2500 pc. package quantity.

Category: Permanent Labels

Corrugated loom tubing slit wall, .38" (9.7mm) x 100' (30.5m), polyethylene, yellow.

Category: Split Wall Loom Tubing

Corrugated loom tubing solid wall, 1.25" (31.8mm) x 50', polyethylene, orange.

Category: Split Wall Loom Tubing

Category 6, RJ45, 8-position, 8-wire shielded spring shuttered universal jack module. Black.

Category: Snap-In Cat 6 Jack Inserts

Module supplied with one LC (keyed G violet) SFF duplex fiber optic adapter with zirconia ceramic split sleeves.

Category: Snap-In Fiber-Optic Jack Inserts

Module supplied with one LC (keyed A black) SFF duplex fiber optic adapter with zirconia ceramic split sleeves.

Category: Snap-In Blank Inserts

Fixed diameter cable clamp, #10 screw (M5), .25" (6.4mm) bundle, white, bulk package.

Category: Cable Clamps & Clips

The Panduit Cable Routing Trough creates a safe and strong pathway for a large capacity of network cables. 4RU, Black, hardware kit included.

Category: Rack Cable Management Devices

Corrugated loom tubing slit wall, .25" (6.4mm) x 10000' (3048m), heat stabilized black nylon 6.

Category: Split Wall Loom Tubing

Module supplied with one 3.5mm (1/8") stereo headset solder-type connector, Intl Gray.

Category: Snap-In Blank Inserts

2-position module supplied with one 15-pin DB connector mounted to a printed circuit board, terminates on site, off white.

Category: Multimedia Outlet System Wallplate Inserts

Braided Bonding Strap, one-hole, 4.00" length x 1.06" width (101.6mm x 27.0mm).

Category: Load Center Bonding Straps

Dome-Top® barb ty cable tie, light-heavy cross section, 14.9 (378mm) length, heat stabilized weather resistant nylon 6.6, black.

Category: Non-Releasable Cable Ties

OM1 2 fiber, 16mm jacket, patchcord, Riser (OFNR) rated, LC duplex to SC duplex, Std IL

Category: Fiber Optic Patch Cords

Duplex standard grade SC to reference grade SC reference cable assembly, riser rated 2mm jacketed cable 50/125µm

Category: Fiber Optic Patch Cords

Used to support the 2x2 and 4x4 Fiber-Duct™ Systems by attaching to underfloor pedestal (not included). Use on pedestals up to 1" in diameter. Bracket contains hardware to attach to pedestal and hardware for mounting channel to bracket.

Category: Brackets

FiberRunner® QuikLock™ Threaded Rod Trapeze Bracket for Wyr-Grid® 24" (610mm) width. Used to support FiberRunner® 4x4, 6x4, and 12x4 Channel above or below the Wyr-Grid® 24" Pathway using the same 1/2" or 12mm threaded rod used to support the WGTB24BL bra

Category: Mounting Hardware & Brackets

OM3 2-fiber, 1.6mm jacket, patchcord, Riser (OFNR) rated, LC duplex to SC duplex, Std. IL

Category: Fiber Optic Patch Cords

Compression Lug, Copper, 2-Hole, Flex, Long Barrel, #2 AWG Wire, 1/4" Stud Hole, .75 Hole Spacing

Category: 2-Hole Long Barrel Copper Compression Lugs

Gate valve lockout, accommodates 1.00" – 2.50" diameter handle, yellow.

Category: Valve Lockouts