"HGL-1/8-1/8-B"

4 Inch Square Box, Welded, Metallic, 1-1/2 Inch, Side Knockouts (2) 1/2 Inch, (1) 1/2 Inch and 3/4 Inch Eccentric, Bottom Knockouts (3) 1/2 Inch, (2) 1/2 Inch and 3/4 Inch Eccentric, End Knockouts (2) 1/2 Inch, (1) 1/2 Inch and 3/4 Inch Eccentric, 21.0 Cubic Inches

Category: 4" Square Metallic Boxes

B11-120GLV

Category: Steel Solid Strut

Relay, Ice Cube, 8-Pin, 2-Pole Double Throw, Silver Cadmium Oxide Contacts, with Indicator, 120 Volt AC Coil, Enclosed

Category: 8-Pin Ice Cube Relays

Band Saw Blade, 24 TPI, Portable, Length: 35-3/8", Cutting Depth: 5/32" - 3/16".

Category: Bandsaw Blades

C-Tap Connector, Wire Range 3/0 AWG to 250 MCM, 5/8 Inch or 3/4 Inch Rod, (Run) 3/0 AWG to 250 MCM (Tap), Copper

Category: Grounding Grid Connectors

Solar Photovoltaic Wire, 8 AWG, RHW-2, UL Photovoltaic, 2000 Volt, Red

Category: 2000V PV Wire

Reducing Washer. Size: 1-1/4 x 1 Inch. Steel, Zinc Plated. Package Quantity: 50. *Dottie Part # 30118.*

Category: Reducing Washers

4" Octagon Ceiling Box with Bar Hanger, Metallic. Depth: 1-1/2".Side Knockouts: (4) 1/2" & (2) Priouts. Bottom Knockouts: (2) 1/2". Adjustable Length: 16" to 24". Fan Weight: 70 lbs. Fixture Weight: 110 lbs. Cubic Inches: 16".

Category: Octagon Metallic Ceiling Boxes With Hangers

Rigid Strut Strap, Diameter: 1 1/2 in, Material: Stainless Steel

Category: Strut Channel Rigid Conduit Clamps

Corrosion-resistant couplings ensure permanent, low resistance copper-to-copper connections. They are corrosion-resistant couplings ensure permanent, low resistance copper-to-copper connections. These are used for 5/8" ground rods.

Category: Ground Rod Couplings

Rigid Conduit Strap, 1-Hole, 2 Inch, Steel, For Use With Rigid/IMC Conduit

Category: Steel 1-Hole Conduit Straps

Duct Seal; Pound Block: 1; Package: 10/carton; Shelf Life: Indefinite As long As Stored Properly

Category: Duct Seal

M12™ Fuel 1/2" Ratchet (Tool Only)

Category: Cordless Heavy Duty Impact Wrenches

Push-In Connector, 3/4 Inch, For Non-Metallic/Flexible Cord - K.O. Size 3/4 Inch

Category: Non-Metallic NM Cable Connectors

Connector, Liquid Tight, Straight, Steel, Insulated Throat, Size 3/8 Inch

Category: Straight Steel Liquidtight Flex Connectors

K-Lath Screw, Phillips Wafer Head, Size: #8 x 3/4". Metal Piercing, Zinc Plated Steel, Package Quantity: 500. *Dottie Part # 15705.*

Category: Phillips Wafer Head K-Lath Screws

Cable Tie, 8", UV Black Nylon, Intermediate Cross Section, Natural, Pack of 1000

Category: Non-Releasable Cable Ties

Plug Connector Set, Screw Clamp, 6-Position, Nominal Current: 8 Amp, Rated Voltage: 160 Volt, Pitch: 3.81 mm, Contact Surface: Tin, Includes Top and Bottom Side Connectors, Use with Expansion Module Terminal Base Catalog 1444-TB-B

Category: PLC Terminal Bases

Relay, Safety, Control, 10 Amp, 24 Volt DC, Coil, 8 Pole, 7 Normally Open, 1 Normally Closed Contacts, Open DIN Rail Mount

Category: Intelligent Safety Relays

UV Rated Plastisol Covered Aluminum Distribution Connector, 1-Sided Entry, 3 Ports, #4 AWG- 600 Kcmil, 600 V, 3/8" Hex

Category: Single Sided Entry Wire Connector Blocks

5/8 X 8 OVAL EYE BOLT

Category: Eye Bolts

4 Inch Square Cover, 1-1/2 Inch Raised, 1-Device, Metallic, Drawn

Category: 4" Square Metallic Box Fixture Covers

Non Metallic Straight Conduit Connector, 1 IN Trade, Nylon 6, Natural

Category: Straight Non-Metallic Liquidtight Flex Connectors

House Panel, 200 Amp, 120/240 Volt AC, 1-Phase, 8 Space, OH/UG Feed, 4 Jaw Meter, Service Entrance Rated, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: House Panels