"Cable Glands"

175 1-Piece Extra Heavy Duty Cable Tie, 47.566 IN L x .345 IN x .085 IN THK, Nylon/Polyamide 6.6

Category: Non-Releasable Cable Ties

Ranger Strain Relief Straight Liquidtight Cord Connector 3/4 IN Trade, 1/2-5/8 IN Openings, Die Cast Zinc

Category: Straight Die Cast Zinc Cord Grips

Liquidtight Cord Connector, Strain-Relief, 2 Inch, Cable Range: 1.937 - 2.187 Inch, Aluminum

Category: Straight Die Cast Zinc Cord Grips

Anti-Short Bushing, For Use With Cable Sizes 10-4, 8-2, 8-3, 1-1 AWG, Non-Metallic

Category: Anti-Short Bushings

Cable Tray Clamp, Swivel Type, Acommodates 1 to 1-1/4 Inch Conduit, Malleable Iron, For Use With Aluminum and Steel Cable Tray With Reinforced Flanges

Category: Cable Tray Clamps

BUSHING

Category: Replacement Cable Glands

Anti-Short Bushing, For Use With Cable Sizes 8-4, 6-2, 6-3, 4-2, 4-3, 6-4 AWG, Non-Metallic

Category: Anti-Short Bushings

3-1/2" Octagon Box, 1-1/2 Inch Deep, Galvanized Steel, 1/2 Inch Knockouts, Cubic Inches: 11.8, Flat Bracket Offset 1/2 Inch from Face, Non-Metallic Cable Clamps (LC) for Metal-Clad Cable, Two Ears, One on Each of Two Opposite Sides

Category: Octagon Metallic Boxes With Brackets

1/2 IN Liquidtight Strain Relief Connector, 1/8 IN To 3/8 IN Cable Openings, 45 Deg Bend, Malleable Iron

Category: Straight Aluminum Cord Grips

Ranger Strain Relief Straight Liquidtight Cord Connector 3/4 IN Trade, 5/8-3/4 IN Openings, Die Cast Zinc

Category: Straight Die Cast Zinc Cord Grips

Front Terminals For Cables in Copper, 14 - 1/0 AWG, 125 Amp, For Use With XT2 Circuit Breakers

Category: Molded Case Circuit Breaker Lug Kits

Non-Metallic Sheathed Cable Connector, Two Screw, Straight, Knockout 2-1/2 Inch, Malleable Iron with Zinc Plating

Category: Iron NM Cable Connectors

Four-Way Adhesive Mounting Base, Black Nylon 6.6 for Temperatures up to 65 Degrees Celsius (149 F), Weather and UV Resistant, Length of 28.6mm (1.13 Inches), Width of 28.6mm (1.13 Inches), Height of 5.7mm (0.22 Inches), Self-Adhesive Mounting Method

Category: Cable Tie Bases

3/4 IN Liquidtight Strain Relief Connector, .31 IN To .56 IN Cable Openings, 90 Deg Bend, Malleable Iron

Category: 90° Malleable Iron Cord Grips

Ranger Strain Relief Straight Liquidtight Cord Connector 3/4 IN Trade, 3/8-1/2 IN Openings, Die Cast Zinc

Category: Straight Die Cast Zinc Cord Grips

4 Inch Square Box, Welded, Metallic, Armored Cable Clamps, Metal Stud Braket, Depth: 2-1/8 Inch, Side Knockouts: (2) 1/2 Inch, (1) 1/2 Inch and 3/4 Inch Eccentric, Bottom Knockouts: (1) 1/2 Inch, End Knockouts: (2) 1/2 Inch for Cable, Cubic Inches: 30.3

Category: 4" Square Metallic Boxes With Brackets

Two-Way Mounting Base, Natural Nylon 6.6 for Temperatures up to 65 Degrees Celsius (149 F), Length of 28.6mm (1.13 Inches), Width of 28.6mm (1.13 Inches), Height of 6.4mm (0.25 Inches), Self-Adhesive Mounting Method, Bulk Pack

Category: Cable Tie Bases

Strain Relief Straight Liquidtight Cord Connector, 1/2 IN, 1/8-3/8 IN Openings, Polyamide/Nylon 6.6

Category: Straight Non-Metallic Cord Grips

Strain Relief Straight Liquidtight Cord Connector, 1/2 IN, .4 To .56 IN Openings, Nylon, Black

Category: Straight Non-Metallic Cord Grips

Strain Relief Straight Liquidtight Cord Connector, 1/2 IN, .125 To .275 IN Openings, Nylon, Black

Category: Straight Non-Metallic Cord Grips

Ranger Strain Relief Straight Liquidtight Cord Connector 1/2 IN Trade, 1/2-5/8 IN Openings, Die Cast Zinc

Category: Straight Die Cast Zinc Cord Grips

Replacement Bushing, Diameter: 1/2 Inch, Size: .375 - .500 Inch, Material: Neoprene, For Use With Water Strain Relief Connector

Category: Replacement Cable Glands

THB TC5344AX 4WAY MTG BASE .7

Category: Cable Tie Bases

Tray/Cord Fitting, Hub Size NPT 1/2 Inch, Cable Diameter 0.250 to 0.400 Inch, Throat Diameter 0.540 Inch, Aluminum

Category: Aluminum Cable Glands