"wiremold"

Non-Metallic, 2-Gang, Device Mounting Bracket, 4000 Series. Size: 6" Length. Ivory.

Category: 2-Gang Raceway Device Brackets & Plates

Steel, Flat Elbow. 4000 Series. Size: 4-3/4" Width, 1-3/4" Height. Ivory.

Category: Large 2-Piece Metallic Raceway Elbows

One-gang blank housing assembly. Designed to blank off compartment when no devices are used. NOTE: When using on a 6ATCFF Furniture Feed unit, 1BHA (sold separately) is required.

Category: Recessed Floor Box Service Fittings

Non-Metallic, 90° Flat Elbow, 2300 Series. Size: 4-3/16" Length. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Elbows

Raceway Divided Entrance End Fitting, 2400 Series, Steel, Ivory, 1/2", 3/4" & 1" knockouts

Category: Small 2-Piece Metallic Raceway End Fittings

Steel, Combination Connector, 1500 Series. Size: 1-21/32" Width, 3-1/4" Length. For use with: 1/2" Trade Size Conduit, Armored Cable.

Category: Metallic Overfloor Raceway Connectors & Adapters

Non-Metallic, 2-Gang, Device Mounting Bracket., 4000 Series. Size: 6" Length. Plastic, Gray.

Category: 2-Gang Raceway Device Brackets & Plates

Steel, 2-Gang, Overlapping Duplex Receptacle Cover, 4000 Series. Size: 5-1/8" Length. Ivory.

Category: 2-Gang Raceway Box Covers

Steel, Prewired Plugmold, Tamper-Resistant, 3' Length. White. Outlets (6") O/C: Total Outlets: (6) 15A, 125V: Single Circuit, (1) 2-Port 2.4 USB, 5V DC, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

Co-extruded design, smooth plastic finish with adhesive backing. Available in 6' (1.8m) lengths, packed 120' (36.6m) per carton. 2900 Series. Ivory Finish - White

Category: 1-Piece Non-Metallic Raceway

Two equal compartments - Base accepts single or Twin Snap Cover. 5400 Series raceway is available in 8' (2.4m) lengths with pre-punched mounting holes, packed 48' (14.6m) per carton. White

Category: 2-Piece Non-Metallic Raceway

Set screw coupling used for attaching in-line raceway sections.

Category: Plugmold Clips, Couplings, & Adapters

Connects 3000 Series Raceway with 1/2" trade size conduit and armored cable connectors. 1/2" trade size KOs on end and each side of fitting. Can be connected to conduit boxes by using 1/2" chase nipple. Gray

Category: Small 2-Piece Metallic Raceway End Fittings

For mounting devices 12" (305mm) on center using 3027AE, 3033JE, 3036HE, 3040CE, 3043, 3046, 3048R and 3051LE Series Device Plates. Gray

Category: Small 2-Piece Metallic Raceway Covers

Steel, 4-Gang, Device Box, 500, 700 Series. Size: 4-5/8" Length, 8-11/32" Width, 1-3/4" Height. Includes: 1/2" Trade Size KOs. Ivory.

Category: 4-Gang Raceway Device Boxes

Steel, Prewired Plugmold, Length: 6 ft. Color: Black. Outlets (12") O/C: Total Outlets: (6) 15A, 125V: Single Circuit, Single Outlets.

Category: Single Circuit Steel Plugmold

Aluminum, 1/2" Diameter Hub Adapter End Fitting, AL Series. Size: 1-3/8" Width, 1" Height. Includes: 1/3" Plastic KO. Aluminum.

Category: Small 2-Piece Metallic Raceway End Fittings

Non-Metallic, Entrance End Fitting, 800 Series. Size: 4-1/4" Length, 1-7/16" Width, 1-1/2" Height. PVC, Ivory

Category: 2-Piece Non-Metallic Raceway End Fittings

Steel, Prewired Plugmold, Tamper-Resistant, Length: 6 ft. Color: Black. Outlets (6") O/C: Total Outlets: (11) 15A, 125V: Single Circuit, (1) 2-Port 2.4 USB, 5V DC, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

Non-Metallic, 90° Flat Elbow, NM2000 Series. Size: 3-3/16" Length, 1-7/8" Width. PVC, Ivory.

Category: Plugmold Elbows

Complete with prewired 15A quad receptacle can be wired as standard or isolated ground. Flush poke-thru-style flanges available in a variety of colors/finishes. Slide covers match painted flange colors. Aluminum and brass covers shipped with black slide covers. Brass flange also available with nonmetallic brass-color slide holder. Die-cast aluminum construction with three 1/2" trade size knockouts: two on the sides and one on the bottom. 18 cu. in. (295 cu.cm) capacity. Requires a 4" (102mm) diameter hole and overall floor depth of 1" (25mm). Assembled with scrub water gasket. For use on tile, wood, or carpet floors. Black

Category: Round Recessed Box Flanges

Non-Metallic, Transition Fitting, Makes Transition From 5400 Series Raceway To The 400/800/2300 or PN03, PN05, and PN15 Series Latching Raceways. Ivory

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Non-Metallic, 3-Gang, Deep Device Box, 2300 Series. Size: 4-3/4" Length, 7" Width, 1-3/4" Depth. PVC, White.

Category: 3-Gang Raceway Device Boxes

Brushed aluminum duplex cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). Flip lids can also be used with 106 type frames for communications. NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Made in USA. Gray

Category: Square / Rectangle Recessed Box Covers