Boxes - Recessed

Recessed Prewired Assembly with Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 6" (152mm) diameter cored hole. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly. (BS) brass.

Category: Assembled Poke-Through Units

6" Diameter, Recessed Poke-Thru Device, Metallic, GrayPoke-Thru Device, Recessed, Assembled Unit, Metallic Cover, Color: Gray (Die Cast). Recessed: 3-1/4 Inch. Diameter: 6 Inch. Depth: 16-3/4 Inch. Includes: (2) Duplex Receptacles (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade). For use with Carpet & Tile Applications

Category: Assembled Poke-Through Units

Single Receptacle, 1-Gang, Floor Box Assembly1-Gang, Floor Box Assembly, Metallic, Cover Type: Screw Plug. Device Type: Single Receptacle. Color: Brass. Includes: Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade, Commercial Grade, Self Grounding, Side Wired, Steel Strap) and Screw Cap.

Category: Assembled Recessed Gang Boxes

Pedestal, Alu, 4-g, W/ 3/4" HubIn-floor Delivery Systems, Large Capacity Series Pedestals, 4-gang, With 3/4" Npt Hub

Category: Recessed Floor Box Service Fittings

The RFB® Series RFB4-4DB Floor Box from Legrand is a versatile activation solutions that provides power to open space areas or directly to workstations. It is a fully adjustable floor box, with tunneling from adjacent or opposite compartments only, (not cross compartments). Tunneling can be set to feed all four compartments from one conduit in a single-service application. All boxes and covers are sold separately. RFB Series Floor Boxes are now available with the new FloorPort Activation Covers. This new series of cover incorporates TopGuard protection to prevent water, dirt, and debris from entering the power and communication device compartments. FloorPort Activation Covers are UL Listed to U.S. and Canadian safety standards for tile, terrazzo, carpet, and wood floors. The RFB Series has many unique applications, some of which include schools, financial institutions, commercial office buildings, and residences.

Category: Recessed Compartment Boxes

Poke-Thru Cover Assembly, Round, Diameter: 6", MetallicPoke-Thru Cover Assembly, Round, Diameter: 6 Inch, Evolution Series, Surface, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Nickel Powder-Coat, For Tile, Carpet, and Wood Flooring. For Use with 6STCP, 6STC, AND 6STCPAV Assemblies.

Category: Poke-Through Cover Assemblies

REC FB 2-G STEEL 2.5-IN CONC CR

Category: Recessed Compartment Boxes

A/V Table Box with 12' Cord, Includes (2) 15 Amp Receptacles in the Recessed Compartments and (1) 15 Amp Receptacle on the Underside of the Box, Color: Black

Category: Recessed Compartment Boxes

Recessed Prewired A/V Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

Flush Concrete Floor Box Series, 1-Gang, Rectangular, Cast Iron Box, Deep, Fully Adjustable, Single Service, Aluminum Top

Category: Recessed Adjustable Floor Boxes

Poke-Thru Device, 10 Inch Diameter, Evolution Series, Cover and Stem are Pre-Assembled, Devices Recessed 4-1/2 Inch, Aluminum Cover

Category: Recessed Floor Box Service Fittings

Flush with floor, cast aluminum cover assembly available in brushed aluminum (AL), black (BK), and gray (GY). Maximum load capacity 3,000 lbs. UL Listed to U.S. and Canadian safety standards to meet UL requirements under UL514A for scrub water exclusion. NOTE: Not for use on bare concrete floor applications. Black

Category: Square / Rectangle Recessed Box Covers

Floor Box, 4-Gang Deep, 10.0" x 10.0" x 5.13"

Category: Square Recessed Floor Boxes

Two-Gang, Clear Polycarbonate

Category: Square / Rectangle Recessed Box Flanges

Poke-Thru, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Nickel

Category: Poke-Through Cover Assemblies

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Flush, Material/Finish: Die-Cast Aluminum/Nickel Powder-Coat.

Category: Poke-Through Cover Assemblies

STL SFH 50 BASE 50BASE ALUMIN

Category: Recessed Floor Box Service Fittings

For use with 10" [254mm] diameter hole. Cover and stem are pre-assembled together. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with an all aluminum cover (assembled) designed to sit on top of finished floor surface (carpet, tile, wood, concrete or terrazzo). Covers are available in the following powder coated finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two plated finishes: brass (PB)

Category: Recessed Floor Box Service Fittings

Recessed Prewired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Nickel

Category: Assembled Poke-Through Units

The RFB Series of Floor Boxes from Legrand are versatile activation solutions that provide power, communication and/or Audio Visual services to open space areas or directly to workstations. RFB Series Floor Boxes are now available with the new FloorPort Activation Covers. This new series of cover incorporates TopGuard protection to prevent water, dirt, and debris from entering the power and communication device compartments. FloorPort Activation Covers are UL Listed to U.S. and Canadian safety standards for tile, terrazzo, carpet, and wood floors. The RFB Series has many unique applications, some of which include schools, financial institutions, commercial office buildings, and residences. 6-Gang Steel Recessed Floor Box.

Category: Recessed Adjustable Floor Boxes

Floor Box Cover Assembly, Type: Flush, Material/Finish: Aluminum/BlackFloor Box Cover Assembly, Type: Flush, Material/Finish: Aluminum/Black, For Use With 8STC & 8STCP Poke-Thru Assemblies.

Category: Poke-Through Cover Assemblies

Recessed Prewired Assembly with Surface Style Cover û For carpet, tile, wood and laminate floors. For use in 6" (152mm) diameter cored hole. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly. (BZ) bronze.

Category: Assembled Poke-Through Units

Above Floor Service Fitting, Height 2-5/8 Inches, Width 4-3/8 Inches, Depth 3 Inches, 1 Inch Conduit Nipple, Aluminum, with One 15-Amp 125 Volt, 3 Wire NEMA Duplex Receptacle

Category: Recessed Floor Box Service Fittings

Cast aluminum cover assembly available in brushed aluminum (AL), painted black (BK), and gray (GY). Provided with carpet cut-out area. Maximum load capacity 1,500 lbs. UL Listed to U.S. and Canadian safety standards to meet UL requirements under UL514A for scrub water exclusion. NOTE: Not for use on bare concrete floor applications. Gray

Category: Square / Rectangle Recessed Box Covers