Poke-Through Systems

4IN PREWIRED SURFACE 4 REC SN

Category: Assembled Poke-Through Units

Poke-Thru Device Assembly, 8 Inch Diameter, Includes: (2) 20 Amp Duplex Receptacles, For Use With 8CTC2/8CT2 Covers

Category: Assembled Poke-Through Units

Poke-Thru Device Furniture Feed Cover Assembly, 4 Inch Diameter, 2 Gang, 3/4 and 1 1/2 Inch Screw Plug Openings, Die Cast Metal, Black, For Use With Concrete, Carpet, Tile, and Wood Floors

Category: Assembled Poke-Through Units

Poke-Thru Abandonment Plug, 4 Inch Core Hole, Material/Finish: Aluminum/Black

Category: Assembled Poke-Through Units

6IN SURFACE STYLE CVR ASSEMBLY SB

Category: Poke-Through Cover Assemblies

Poke-Through Device, Floor Fitting, AV Series, Carton of 1, Universal Cover Assembly.

Category: Assembled Poke-Through Units

<p>Combination device plate that will accept up to three (3) Extron Electronics MAAP style plates, and up to two (2) ports of communication devices. For use in the center compartment only. Devices supplied by others.</p>

Category: Poke-Through Mounting Plates

WLK 4ATCBK 4IN UNWIRED PT ASS

Category: Assembled Poke-Through Units

Poke-Thru, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Bronze

Category: Poke-Through Cover Assemblies

Recessed Prewired Flush Style Poke-Thru Assembly, Diameter: 8 Inch, Depth: 16-1/4 Inch, Black

Category: Assembled Poke-Through Units

Poke-Thru, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Gray

Category: Poke-Through Cover Assemblies

Cover for Poke-Thru/Finish Flange and Conduit Adapter Assembly, RC7 Series, Plugs: (1) 3/4", (2) 1/2", Painted Black, For Use with Carpet, Wood and Tile Flooring.

Category: Poke-Through Cover Assemblies

Poke-Thru Cover Assembly, Surface Style, 4 Inch Diameter, Aluminum Die Cast with Brushed Aluminum Finish

Category: Poke-Through Cover Assemblies

Assembled unit. Prewired 20A duplex receptacle can be wired as a standard duplex receptacle or isolated ground. Flange available in painted gray (GY), black (BK), ivory (VY) or brushed metal finishes in aluminum (AL), and brass (BS). Slide covers match the painted flange colors: gray, black, and ivory. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA). Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes two Ortronics TracJack adapters and two Ortronics Series II adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

Poke-Thru Cover Assembly, Surface Style, 4 Inch Diameter, Aluminum Die Cast with Black Powder Coat Finish

Category: Poke-Through Cover Assemblies

Poke-Thru Device, 8 Inch Diameter, Prewired, (2) 20A Duplex Receptacles, (1) 1/2 Gang Blank Housing, (3) 1 Gang Pass Through Housing Assembly, (1) 1/2 Gang 3/4 Inch Conduit Housing Assembly, (1) 8 Inch Divider Included

Category: Assembled Poke-Through Units

Poke-Thru Device Cover, Series: RC4, Nonmetallic, Cover Type: Flush, Slide, Material/Finish: Polycarbonate/Black Cover w/ Aluminum Painted Flange. Diameter: 8-1/4", For Use on Tile, Wood, Laminate, or Carpet Flooring.

Category: Poke-Through Cover Assemblies

Poke-Through Cover, 5 Inch Diameter, (2) Flip Lids, Nickel Plated, Includes Metal Subplate And Pre-Assembled Gasket And Mounting Screws, And Cover Mounting Screws

Category: Poke-Through Cover Assemblies

Assembled unit. Prewired 20A duplex receptacle can be wired as a standard duplex receptacle or isolated ground. Finished with a brushed brass flange and a black device plate. Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes two Ortronics TracJack adapters and two Ortronics Series II adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Finish - Brass

Category: Assembled Poke-Through Units

Exterior Box Cover Assembly L6-30R – Exterior box cover assembly prewired with (1) 30A L6-30R, 240 V corrosion-resistant receptacle, Brown

Category: Poke-Through Cover Assemblies

Poke-Thru Abandonment Plug, 3 Inch Core Hole, Material/Finish: Aluminum/Black

Category: Assembled Poke-Through Units

6IN SURF STYLE HEAVY DUTY CVR ASM

Category: Poke-Through Cover Assemblies

HUB PT7XC FRPT FITTING, 3"

Category: Assembled Poke-Through Units

Device plate that will accept up to two (2) Extron Electronics MAAP device plates. For use in either of the two side compartments only. Not for use in the center compartment. Extron devices supplied by others.

Category: Poke-Through Mounting Plates