"wiremold"

Device plate that will accept up to two (2) Extron Electronics MAAP device plates. For use in either of the two side compartments only. Not for use in the center compartment. Extron devices supplied by others.

Category: Poke-Through Mounting Plates

WMD 6CT-CTR

Category: Poke-Through Cover Assemblies

Available in black (BK), gray (GY), ivory (VY), nonmetallic brass (BS), and nonmetallic aluminum (AA). Assembled with scrub water gasket. For use on tile or carpet floors.

Category: Poke-Through Cover Assemblies

Receptacle opening 1 3/8" (35mm). For 8" poke-thru units only.

Category: Poke-Through Mounting Plates

Single-gang, blank.

Category: Poke-Through Mounting Plates

Poke-Thru Cover Assembly, Surface Style, 4 Inch Diameter, Aluminum Die Cast with Black Powder Coat Finish

Category: Poke-Through Cover Assemblies

WMD 4CT-CTR

Category: Poke-Through Cover Assemblies

<p>Combination device plate that will accept up to three (3) Extron Electronics MAAP style plates, and up to two (2) ports of communication devices. For use in the center compartment only. Devices supplied by others.</p>

Category: Poke-Through Mounting Plates

Poke-Thru Device Assembly, 8 Inch Diameter, Includes: (2) 20 Amp Duplex Receptacles, For Use With 8CTC2/8CT2 Covers

Category: Assembled Poke-Through Units

WMD 4ATCP2RSB 4IN PREWIRED SU

Category: Assembled Recessed Poke-Through Units

RC7 PT W/ AL FLANGE AND AL CENTER

Category: Assembled Poke-Through Units

WMD RC4ATCNK

Category: Assembled Poke-Through Units

Poke-Thru, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Bronze

Category: Poke-Through Cover Assemblies

Surface Style Cover Assembly, 8 Inch Round, Evolution Series, Die Cast Aluminum With Black Powder Coat, Each Cover is Made From Die-Cast Aluminum, Equipped With a Durable Hinge That Allows 180° Rotation, Two (2) Slide Egress Doors With Lock/Auto Close Options, 8° Beveled Edge. For Use With Carpet, Tile, Wood, Polished Concrete, and Terrazzo.

Category: Poke-Through Cover Assemblies

Center-gang 2" trade size conduit service feed assembly. Designed to allow connection to 2" trade size conduit feed in two (2) of the four (4) center- gang locations.

Category: Assembled Poke-Through Units

Nonmetallic slide holder assembly. Available in gray (GY), black (BK), ivory (VY), aluminum colored (AL) and brass colored (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3 Series Poke-Thru Devices require a 4" [102mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Poke-Through Cover Assemblies

Complete with one-piece finish flange and conduit assembly with one 3/4" and two 1/2" trade size conduit adapters and closure plugs. Colors available in painted gray (GY), painted black (BK), brushed aluminum (AL), and plated brass (BS). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC7AFFTC Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Anodized Aluminum

Category: Assembled Poke-Through Units

6IN PREWIRED SURF STYLE ASSEMBLY SN

Category: Poke-Through Cover Assemblies

4IN PREWIRED SURFACE DUP CR AA

Category: Assembled Poke-Through Units

FLOORPORT ABANDON PLATE

Category: Assembled Poke-Through Units

6" Round Cover,Flush, Recessed Evolution 6AT Series,Black6" Round, Poke-Thru Cover Assembly, Evolution Series, Flush, Metallic, Cover Type: One Door/Twist Open, No Device: (4) Gangs of Power, Communication, or A/V Capability, Material/Finish: Die-Cast Aluminum/Black Powder-Coat, For Tile, Carpet, and Wood Flooring. For Use with 6STCP, 6STC, AND 6STCPAV Assemblies.

Category: Poke-Through Cover Assemblies

Poke-Through Device, Prewired, 4 Inch Diameter, (2) 20 Amp Duplex Receptacles, (10) 1-1/2 and 3/4 Inch Knockouts, NEMA 5-20R, 125 Volt, Gray

Category: Assembled Recessed Poke-Through Units

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Surface, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat.

Category: Poke-Through Cover Assemblies

Includes 6" diameter poke-thru stem assembly with a disposable plate. Devices are recessed 3 1/4" (83mm) below floor surface. No cover assembly is included. For use with the following cover assemblies (purchased separately): 6CTC and 6CT Series. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Power Receptacles installed. For Center Compartment: One (1) 6ACT8A Mounting Plate, One (1) 6TRAC Mounting Plate, One (1) 6SER Mounting Plate. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Pass-Through Blank Housing Assembly (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.) , One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device.

Category: Assembled Poke-Through Units