"KTHK20-B-PP-AS"

We Offer Over 100 Stock Legends To Meet All Of Your Machine And Equipment Labeling Needs. All Labels Are Made Of Durable, Self-sticking Polyester And Most Feature Pictograms As Well As Text. Label Size Is 3 1/2h X 5w Or 5h X 3 1/2w. Standard Package: 5

Category: Electrical Room Labels

Cast Device Box, Height 5 Inch, Width 10.63 Inch, Depth 2.69 Inch, Capacity 98 Cu Inch, Number of Gangs 3, Material Epoxy Powder Coated Copper Free Aluminum, Shape Deep, Configuration Type FDB, Mounting Hardware (4) Lugs, Approval UL 514A, Application Wiring Device Such as Switch and Receptacle, Rough Usage, Serve as Pull Box for Conductor, Used On Threaded Rigid Metal Conduit, Inclusion Internal Ground Screw, Hub Type Brazed Threaded, Opening Type 1/2 to 1-1/2

Category: 2-Gang Aluminum FS & FD Device Boxes

Easy-Splice Wrap Around Gel Splice Kit - 500 MCM to 6 AWG - 10 Inch Easy-Splice wrap-around gel splice closure sleeves quickly insulate and seal buried electrical connections rated up to 1,000 volts. Engineered to handle direct burial and manhole applications, these splice enclosure sleeves are equally well suited for insulation and jacket repair. Simply wrap and snap the sleeve on any cable in the use range. The sealant gel in the sleeve seals on contact. The splice closure sleeve can be applied on all common compression connectors and low voltage cables, as well as in-line mechanical connectors. Qualified to ANSI C119.1-1986 for underground splicing. A minimum seal length is required on each side of the connector opening or jacket damage. Use this guideline for minimum seal distance: WAGS-4/0 Series: 1.50" each side WAGS-500 Series: 2.20" each side WAGS-750 Series: 3.00" each side

Category: Low Voltage Heat Shrink Splice Kits

DAUP 10400-00-B 5/16-24 NF GH3 4FL P

LED Canopy, 120-277V, 44W, 4900L, 4000K, Dark Bronze

Category: Garage LED Lighting

3M™ 5760 Series Cold Shrink Inline Splice Kit with 2131 compound, is designed for splicing shielded, 5/8 to 15 kV armored or non armored cables. It is used in cable trays, junction boxes and cable racks/hangers, as well as aerial and wet or dry locations.

Category: Medium Voltage Cold Shrink Splice Kits

Square D,MANUAL STARTER 277VAC,1-Phase,16A,1HP@115/230/277VAC,1P,600 Vac/250 Vdc,F,Flush,Non-Reversing Manual Starter,Provides overload protection as well as manual ON/OFF control for small motors in a variety of industrial and commerical installations.,Screw Clamp,Single Unit Gray Flush Plate,Thermal - Melting Alloy,UL Listed - CSA Certified - CE Marked,not rated (flush plate) plastic standard size

Category: Toggle Manual Starters / Switches

20percent Thinner Wall Construction Faster Cutting Due To Less Material Being Removed For The Same Size Hole, Duel Alternating Tooth Geometry, More Aggressive Cutting As Well As Increased Chip Ejection, Cuts Up To 15percent Faster, Proprietary Steel And 3

Category: Annular Cutters

Unit includes four prewired 20A receptacles. Each duplex receptacle is wired as separate circuit. The duplex can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY) or brushed metal finishes in aluminum (AL), and brass (BS). Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA). Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC4 Series Poke-Thru Devices require a 4 (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC4 Assembled Unit-Brass Finish Flange Nonmetallic Colored Brass Slide Holder, 2-20A Duplex Standard or IG and Cat 6 Connectors.

Category: Assembled Poke-Through Units

18-8 AWG copper crimp sleeve wire connectors are strong wire connectors that are especially suited for branch circuitry as well as applications that are subject to vibration.100 Count

Category: Copper Crimp Connectors

B-LINE B450 1/2" SS4

Category: Strut Channel Washers

Z12R READER CLR AS LEN +2.50 CLR FRM W/ BLK RUBBER TMPL ENDS

Category: Magnifying Protective Eyewear

Z28 CLR AS LENS BLK ADJ TMPLS OTG STYLE

Category: Frameless Protective Eyewear

Z12R READER CLR AS LEN +2.25 CLR FRM W/ BLK RUBBER TMPL ENDS

Category: Magnifying Protective Eyewear

Z12R READER CLR AS LEN +1.75 CLR FRM W/ BLK RUBBER TMPL ENDS

Category: Magnifying Protective Eyewear

90° Insulated Connectors Die Cast Zinc, 1-1/4 In. Trade Size

Category: 90 Degree Die-Cast Zinc Liquidtight Flex Connectors

3M™ General Purpose Vinyl Tape 764 is an economical vinyl tape option for color coding, bundling and safety marking applications. We've designed this tape to resist wear, weathering and light abrasion while providing good instant adhesion to many surfaces. It is available in an array of distinctive colors, as well as transparent.

Category: Economy Grade Vinyl Electrical Tape

HOLDSaBIT KIT: The HOLDSaBIT will hold any 1/4" hex shank item as well as pencils, nut drivers and hex shank drill bits. Can be used on drill or tool belt. HOLDSaBIT KIT includes Bits (1-70140G, 1-70240R, 70241BL, 1-70531R, 1-70631Y, & 1-72133P)

Category: Drill / Power / Insert Bit Kits

COOPER B-LINE 8IN TRAY COVER

Category: Straight Cable Tray Covers

Softstarter PSTX142-690-70 has a rated maximum operational current of 142 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

Softstarter PSTX30-690-70 has a rated maximum operational current of 30 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

10-30V DC Operating Voltage. Sensing Range: 15-120 mm. Unusable Range: 0-15 mm. Diameter: 12 mm. Single Switch Point Output. Output: 1 PNP. Nickel-Plated Brass Housing, IP67. Used to detect Metallic and Non-metallic objects as well as fluids (Liquid Levels).

Category: Ultrasonic Proximity Sensors

LED Lamp, 15W, 120-277V, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), Lumens: 1800, CRI: >80, Color Temperature: 4000K, Rated Life: 50,000+ Hrs. NOTE: Must remove or bypass ballast, Also need G13, Non-Shunted Sockets. The Lunera T8 LED may be used in open and 2-lamp IP67 rated enclosed fixtures. Indoors or outdoors.

Category: T8 Tubular LED Lamps

Flex Connector, Set Screw, Straight, 1-1/2 Inch, Die Cast Zinc, For Use With Flexible Metal Conduit

Category: Straight Squeeze Flex Connectors