Splicing & Terminating Kits

Mine & Portable Cable Splice Kit, 5/8kV Type: SHD-GC 4/0 AWG to 500 MCM, Type: MPF-GC & MPF: 250 to 500 MCM, 15kV Type SHD-GC: 1/0 AWG to 500 MCM, Type MPF-GC & MPF: 1/0 to 500 MCM. Kit Includes (3) Funnels, (1) Wrap-Around Splice Mold, (3) Rubber Mold Straps, (3) Funnel Supports, (4) Spacer Webs, (1) Strip 3M™ Three-M-Ite™ Elek-Tro-Cut™ Abrasive Cloth, 80J Grit, (13) Size C Bags, 3M™ Scothcast™ Flame Reatardant Compound 2131

Category: Medium Voltage Cold Shrink Splice Kits

Easy-Splice In-Line Gel Splice Kit with Connector, 2 - 4/0 AWG, Black, 1000 Volt

Category: Low Voltage Gel Filled Splice Kits

MMM RJS-4-10FT REJACKETING

Category: Cable Rejacketing Sleeves

Inline Splice Kit, Cold Shrink, 35 kV, Shielded Cable, Conductor Range: 350 - 1000 MCM. Cable Insulation Range Size: 1.240 - 2.070 Inch

Category: Medium Voltage Cold Shrink Splice Kits

215LB403B Loadbreak Kit with Compression Lug, 200A, 15 kV

Category: Loadbreak / Deadbreak Accessories

Splice Kit, Cold Shrink, 15 kV, Works with Various Types of Shielded Cables, Conductor Range: 2 AWG - 4/0 AWG. Cable Insulation Range Size: 0.64" - 1.01". Connector Requirements: Minimum O.D.: 0.40", Maximum O.D.: 1.06", Maximum Length: AL/CU 4.5", Copper 5".

Category: Medium Voltage Cold Shrink Splice Kits

Splice Kit, Motor Lead Pigtail Type, Feeder Cable Range: 1/0 AWG - 250 MCM, Motor Lead Range: 2 AWG - 250 MCM. Voltage Range: 5kV or 8.7 kV, Connection Type: 2-Hole Lug (Pigtail). ***Kit will make (3) Splices***

Category: Medium Voltage Motor Lead Splice Kits

Splice Kit, Cold Shrink, 15 kV, Works with Various Types of Shielded Cables, Conductor Range: 4/0 AWG - 500 MCM. Cable Insulation Range Size: 0.84" - 1.38", Connector Requirements: Minimum O.D.: 0.69", Maximum O.D.: 1.38", Maximum Length: AL/CU 5", Copper 5.75".

Category: Medium Voltage Cold Shrink Splice Kits

Inline Splice Kit, Scotchcast™, 22 - 18 AWG, Diameter 0.500 - 1.00 Inch, Rated 1000 Volt, For Use With Shielded Cables and Direct Burial Applications.

Category: Insulating & Sealing Compound

3M™ Cold Shrink Shielded Splice Kit 5550 Series are for splicing 5 kV and 8 kV shielded, solid dielectric, power cables. Meets requirements of IEEE 404. Each kit contains all the materials (except connectors and optional ground strap) required to construct three (3) single conductor splices on Tape Shield, Wire Shield or UniShield® cables. Note: The kit can also be used to splice a shielded to a non-shielded 5/8 kV cable. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Category: Medium Voltage Cold Shrink Splice Kits

Easy-Splice Push On Gel Stub Splice Kit, 16 - 10 AWG

Category: Low Voltage Gel Filled Splice Kits

215LB508B Loadbreak Kit with Compression Lug, 200A, 15 kV

Category: Loadbreak / Deadbreak Accessories

Splice Kit, Cold Shrink, 15 kV, Works with Various Types of Shielded Cables, Conductor Range: 500 MCM - 1000 MCM. Cable Insulation Range Size: 1.08" - 1.01.7", Connector Requirements: Minimum O.D.: 0.80", Maximum O.D.: 1.84", Maximum Length: AL/CU 6.75", Copper 7.50"

Category: Medium Voltage Cold Shrink Splice Kits

Splice Kit, Cold Shrink, 35 kV, Works with Various Types of Shielded Cables, Conductor Range: 350 MCM - 1000 MCM. Cable Insulation Range Size: 1.24" - 2.07". Connector Requirements: Minimum O.D.: 0.87", Maximum O.D.: 2.07", Maximum Length: AL/CU 7.50", Copper 8.25"

Category: Medium Voltage Cold Shrink Splice Kits

Cold Shrink Splice, QS-III,Cable Insulation Diameter 1.240 - 2.070 Inch, 750 MCM, Silicone Rubber

Category: Medium Voltage Cold Shrink Splice Kits

Splice Kit, Cold Shrink, 15 kV, Shielded Cable, Conductor Range: 4/0 AWG - 500 MCM. Maximum Connector Length: Copper 5.75 Inch or Aluminum 5.00 Inch.

Category: Medium Voltage Cold Shrink Splice Kits

3M™ Deadbreak Equipment Connection Kit 625EL33AL, 600A, 15/25kV, 1 Kit/Box

Category: T-Body Deadbreak Connectors

Deadbreak Elbow Connection Kit, 600 Amp, 35kV, 635 Series Includes: T-Body, 600A, 35kV with Test Point (1), Dead End Plug with Cap (1), AL Stud, 35kV (1), Compression Connector or Shearbolt Lug (1), Copper Tape Strip (1), Cable Adapter (1), 3M Cold Shrink Jacketing Tube (1), Ground Braid Assembly (1), Bleeder Wire for use on JCN and Flat Strap Cable (1), Constant Force Spring (1), Mastic Sealing Strips (2), Silicone Lubricants (4), 3M Cable Cleaning Kit CC-2 (1), Instruction Sheet (1)

Category: T-Body Deadbreak Connectors

T-Body Deadbreak Connector, 600A, 15/25kV, Test Point Housing Without Stud

Category: T-Body Deadbreak Connectors

3m(tm) Rejacketing Sleeve Rjs-5-10ft, 10 Ft Coil, 1 Per Case

Category: Cable Rejacketing Sleeves

Splice Kit, Cold Shrink, 5/8 kV, Shielded or Non-shielded Cable, Conductor Range: Cooper 500 - 1000 MCM, Aluminum 500 - 1000 MCM, Maximum Connector Length: Copper 43 Inch, Aluminum

Category: Medium Voltage Cold Shrink Splice Kits

Cold Shrink Splice Kit, 3 Conductor, For Armored/Non-Armored Cable, 5/8kV, Conductor Size: 3/0 AWG - 250 MCM, Insulation O.D. Range: 0.64 - 1.01 Inch, Splice Length: 52 Inch. Kits Include Material Necessary to Make (1) 3-Conductor Splice. Connectors Are Not Included and Must be Ordered Separately. The Completed Splice is Designed for Use in Cable Trays, Weather Exposed or Direct Burial Locations.

Category: Medium Voltage Cold Shrink Splice Kits

Inline Splice Kit, Cold Shrink, 25/28 kV, Shielded Cable, Conductor Range: 1 AWG - 250 MCM. Cable Insulation Range Size: 0.84" - 1.36", Connector Requirements: Minimum O.D.: 0.46", Maximum O.D.: 1.36", Maximum Length: AL/CU 4.00", Copper: 4.50".

Category: Medium Voltage Cold Shrink Splice Kits

Rejacketing Sleeve, 15kV or Less, Shield Diameter Range: 0.60 - 0.80 Inch, 10 Foot Coil, Rejacketing Sleeves are Designed To Be Used In Conjunction With 3M™ Cold Shrink Breakout Boots and Silicone Rubber Terminations.

Category: Cable Rejacketing Sleeves