Search results

EMT Set Screw Connector, 1 Inch, Insulated, Steel With Zinc Plating, For Use With EMT Conduit

Category: Steel EMT Set Screw Connectors

Reducing Washer, 3/4 Inch To 1/2 Inch, Steel, Zinc Plated

Category: Reducing Washers

Flexible Steel Conduit, 3/4 Inch, Reduced Wall, Cut to Length

Category: Flexible Steel Conduit

Liquidtight Connector, Straight, 1 Inch, Die Cast Zinc, For Use With Liquidtight Flexible Metal Conduit & Type B Non-Metallic Conduit

Category: Straight Die-Cast Liquidtight Flex Connectors

AC/Flex Cable Connector, 3/8 Inch, 90°, Two Screw Clamp, Zinc Die Cast, For Use With Armored Cable and Flexible Metal Conduit

Category: 90 Degree Two Screw Squeeze Flex Connectors

Threaded Conduit Nipple, 1/2 Inch x 2 Inch, Steel, For use with Rigid Threaded Conduit

Category: Steel / Galvanized Steel Conduit Nipples

EMT Compression Connector, 1 Inch, Concrete Tight, Steel

Category: Steel Concrete Tight EMT Compression Connectors

2-Gang, 1-Toggle 1-Duplex Device Combination Wallplate, Midway Size, Thermoplastic Nylon, Device Mount - White.

Category: Midway & Oversized Combination Wallplates

Terminal Base Assembly, 8 Screw Clamp Connections, 1 Piece Point I/O Mounting Base, with Integrated Terminal Locations, 300 Volt

Category: PLC Terminal Bases

4" Round, Vertical/Horizontal Mount, Weatherproof Cover, Die Cast, Type: Round Cluster Cover with (3) 1/2" Outlet. Color: White. Includes: (2) Closure Plugs.

Category: Round Metallic Weatherproof Box Covers

50 Amp, 120/240V, 1-Phase, Unmetered, Surface Mount, Top Feed, NEMA 3R Receptacles: (1) 14-50R Breakers: None

Category: Unmetered Temporary Power Outlets

1-1/4" Non-Metallic Liquidtight Flexible Conduit, Gray, Cut to Length

Category: Liquidtight Flexible Non-Metallic Conduit

Building Wire, Type THHN/THWN-2, 1/0 AWG, Copper, Stranded, Orange, Cut to Length

Category: 1/0 AWG Stranded Copper THHN

Building Wire, Type THHN/THWN-2, 1/0 AWG, Copper, Stranded, Blue, Cut to Length

Category: 1/0 AWG Stranded Copper THHN

1" EMT or RIGID Conduit Clamp with retained bolt and built-in nut; 1/4" Mounting Hole. Load Limit: 250 lbs. Standard Package Quantity: 100

Category: Conduit Clamps

Framing Screw, Self-Piercing, Pan Head - Phillips, #6 x 7/16", Order of 1 Each = Pack of 100

Category: Fine Thread Drywall Screws

Wire Marker Booklet, Legend: 1-45 plus 46, 47 & 48 (10 each), Includes: 1-1/2" Markers, 10-Page Booklet

Category: Wire Marker Booklets

1 Inch Liquidtight Steel Flex, UL Listed, Type UA, Steel Core, PVC Jacket, Gray, 100 Foot Coil, Integral Bonding Strip

Category: Liquidtight Flexible Metallic Conduit

Step Bit, Diameters: 7/8" & 1-1/8"", Shank Size: 1/4, Made in the USA, Appropriate Use: Mild Steel, Copper, Brass, Aluminum, Wood, Plastic & Laminates, Maximum Cutting Depth: 10 Gauge. **Optimized for cordless drills in high speed**

Category: Step Bits

Standard Pipe Clamp, Diameter: 1", Material: Steel, Finish: Electro-Galvanized, Thickness .75". For use with: GRC, IMC, SCH 40/SCH 80 Conduit.

Category: Strut Channel Rigid Conduit Clamps

Combination Duplex Receptacle/Outlet and USB Charger. 15 Amp, 125 Volt, Decora Tamper Resistant Receptacle/Outlet, NEMA 5-15R. 5.1 Amps, 5VDC, 2.0 Type A and Type-C USB Chargers. Grounding, Side Wired & Back Wired - White

Category: Tamper Resistant Receptacle / USB Combination Devices

Non-Detectable Underground Tape, 3 IN Roll Width, 1000 FT Roll Length, Caution Buried Electric Line Below Legend, LDPE, Red, 4 MIL Thickness, Elongation: 500 PCT ASTM D882-75B, Tensile Strength: 2750 PSI ASTM D882, Recommended Burial Depth: 4 - 6 IN, For Protection, Location And Identification Of Underground Utility Installations

Category: Underground Tape

Wireway Closure Plate without KO, Size/Dims: 12.00x12.00, Material/Finish: Steel/Gray. For use with Type 1, Wireway.

Category: Wireway Closure Plates

Noalox Anti-Oxidant Compound, Heavy Duty, 200 Series, Includes: 4 oz Squeeze Bottle

Category: Anti-Oxidant Compound