Skip to main content

"UP-44-BU-(1000 OR 500)"

274 Found
nVent Hoffman

Flush Tee 90-Degree Lay-in, 8.00x8.00, Gray, Steel

Item #: 233763
CAT #: F88GTGV
UPC: 783510891305
Company wide:
Panduit

Fitting, End Cap, 2" x 2" (50mm x 50mm)

Item #: 707134
CAT #: FHDEC2X2YL
UPC: 074983911486
Company wide:
Eaton B-Line

NEMA 4X FEED-THROUGH TELESCOPIC FITT"G

Item #: 620433
CAT #: 66-4XSFTF
UPC: 782051134681
Company wide:
nVent Hoffman

Side Coupling CleanTray, 4.00x4.00, Brushed, SS304

Item #: 911226
CAT #: CT44SCSS
UPC: 783510161132
Company wide:
nVent Hoffman

Sweep Tee LayIn Wireway, fits 2.50x2.50, Galvanized, Mild Steel

Item #: 115796
CAT #: F22TGV
UPC: 783510131739
Company wide:
nVent Hoffman

Support Hanger, fits 12.00x12.00, Gray, Steel

Item #: 508979
CAT #: F1212GSH
UPC: 783510519803
Company wide:
nVent Hoffman

Flush Tee 90-Degree Lay-in, 10.00x10.00, Gray, Steel

Item #: 211323
CAT #: F1010GTGV
UPC: 783510468804
Company wide:
Eaton B-Line

Wireway End Flange, 1, Opening: 6" x 4"

Item #: 844664
CAT #: 64-GF
UPC: 782051109443
Company wide:
Panduit

Spill-Over Junction Fitting with 2x2 Exi

Item #: 563707
CAT #: FRSPJ2X2BL
UPC: 074983066179
Company wide:
Panduit

Coupler, 4" x 4" (100mm x 100mm), FiberR

Item #: 294092
CAT #: FRBC4X4YL
UPC: 074983841462
Company wide:
Panduit

Fitting, End Cap, 2" x 2" (50mm x 50mm)

Item #: 1421757
CAT #: FHDEC2X2OR
UPC: 074983911493
Company wide:
Panduit

Fitting and Cover, Inside Vertical 90°

Item #: 1298569
CAT #: FIVRA2X2LG
UPC: 074983675722
Company wide:
Panduit

Fitting and Cover, Inside Vertical 90°

Item #: 1230526
CAT #: FIVRA4X4LG
UPC: 074983566273
Company wide:
Panduit

Fitting, Vertical Tee With Hinged Door

Item #: 1230528
CAT #: FVT4X4LG
UPC: 074983410927
Company wide:
Panduit

Fitting, End Cap, 2" x 2" (50mm x 50mm)

Item #: 874994
CAT #: FHDEC2X2BL
UPC: 074983451142
Company wide:
Panduit

Spill-Over Junction Fitting with 2x2 Exi

Item #: 886382
CAT #: FRSPJ2X2OR
UPC: 074983066186
Company wide:
Panduit

Fitting, End Cap, 4" x 4" (100mm x 100mm

Item #: 1230523
CAT #: FEC4X4LG
UPC: 074983565962
Company wide:
Panduit

Fitting and Cover, Inside Vertical 90°

Item #: 636303
CAT #: FIVRA4X4YL
UPC: 074983702480
Company wide:
Panduit

Fitting and Cover, Outside Vertical 90o

Item #: 1240864
CAT #: FOVRA4X4OR
UPC: 074983566440
Company wide:
Panduit

Fitting, End Cap, 2" x 2" (50mm x 50mm)

Item #: 659486
CAT #: FEC2X2LG
UPC: 074983675647
Company wide:
Panduit

Fitting, Vertical Tee With Hinged Door

Item #: 1241318
CAT #: FVT4X4OR
UPC: 074983410934
Company wide:
Panduit

Fitting and Cover, Inside Vertical 90°

Item #: 843406
CAT #: FIVRA4X4OR
UPC: 074983566341
Company wide:
Panduit

Fitting, End Cap, 4" x 4" (100mm x 100mm

Item #: 1240862
CAT #: FEC4X4OR
UPC: 074983565979
Company wide:
Panduit

Fitting, End Cap, 4" x 4" (100mm x 100mm

Item #: 53376
CAT #: FEC4X4YL
UPC: 074983702442
Company wide:
nVent Hoffman

Flush Tee 90-Degree Lay-in, 8.00x8.00, Gray, Steel

Lay-in Galvanized 90-Deg Flush Tees used for flush mounting to a vertical or horizontal surface. This 90-Degree Flush Tee Lay-in, F88GTGV item measures 8.00x8.00 inches with a material of Steel colored Gray.
Item #: 233763
CAT #: F88GTGV
UPC: 783510891305
Category: Wireway Tee Fittings
Company wide:
Panduit

Fitting, End Cap, 2" x 2" (50mm x 50mm)

Used for closing off open ends of the hinged channel or fittings. No coupler required. Push-on installation, Yellow.
Item #: 707134
CAT #: FHDEC2X2YL
UPC: 074983911486
Category: Wireway Closure Plates
Company wide:
Eaton B-Line

NEMA 4X FEED-THROUGH TELESCOPIC FITT"G

Eaton B-Line series wireway telescoping fitting, 6" X 6" feed through, Wireway telescoping fitting, No cutting or welding required, NEMA 4X, Stainless steel, Brushed finish
Item #: 620433
CAT #: 66-4XSFTF
UPC: 782051134681
Category: Wireway Telescope Fittings
Company wide:
nVent Hoffman

Side Coupling CleanTray, 4.00x4.00, Brushed, SS304

Side coupling used to connect a straight section or fitting to the side of a CleanTray Wireway run. This Side Coupling CleanTray, CT44SCSS item measures 4.00x4.00 inches with a material of SS304 finish Brushed.
Item #: 911226
CAT #: CT44SCSS
UPC: 783510161132
Category: Wireway U-Connectors
Company wide:
nVent Hoffman

Sweep Tee LayIn Wireway, fits 2.50x2.50, Galvanized, Mild Steel

Lay-in Galvanized Sweep Tees offers large radius turns when mounting to vertical or horizontal surfaces. This Sweep Tee LayIn Wireway, F22TGV item fits 2.50x2.50 inches with a material of Steel finish Galvanized.
Item #: 115796
CAT #: F22TGV
UPC: 783510131739
Category: Wireway Tee Fittings
Company wide:
nVent Hoffman

Support Hanger, fits 12.00x12.00, Gray, Steel

Support hangers are used for wireway floor or wall installations. This Support Hanger, F1212GSH item fits 12.00x12.00 inches with a material of Steel colored Gray.
Item #: 508979
CAT #: F1212GSH
UPC: 783510519803
Category: Wireway Support Hangers
Company wide:
nVent Hoffman

Flush Tee 90-Degree Lay-in, 10.00x10.00, Gray, Steel

Lay-in Galvanized 90-Deg Flush Tees used for flush mounting to a vertical or horizontal surface. This 90-Degree Flush Tee Lay-in, F1010GTGV item measures 10.00x10.00 inches with a material of Steel colored Gray.
Item #: 211323
CAT #: F1010GTGV
UPC: 783510468804
Category: Wireway Tee Fittings
Company wide:
Eaton B-Line

Wireway End Flange, 1, Opening: 6" x 4"

Wireway End Flange, NEMA Type 1, Opening: 6 Inch x 4 Inch, Total: 7.5 Inch x 5.5 Inch, Gray, Allows for a Secure Connection of Wireway to an Adjoining Enclosure or Wall
Item #: 844664
CAT #: 64-GF
UPC: 782051109443
Category: Wireway Panel Adapters
Company wide:
Panduit

Spill-Over Junction Fitting with 2x2 Exi

Assembles onto 4x4, 6x4, 12x4, or 24x4 FiberRunner® Channel, spilling over the side into a 2x2 vertical exit. Requires coupler to attach 2x2 FiberRunner® and fittings to the vertical exit. Mounts directly to existing installation with no alteration requir
Item #: 563707
CAT #: FRSPJ2X2BL
UPC: 074983066179
Category: Wireway Box Connectors
Company wide:
Panduit

Coupler, 4" x 4" (100mm x 100mm), FiberR

Pre-assembled 4in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Yellow, 1 piece.
Item #: 294092
CAT #: FRBC4X4YL
UPC: 074983841462
Category: Wireway U-Connectors
Company wide:
Panduit

Fitting, End Cap, 2" x 2" (50mm x 50mm)

Used for closing off open ends of the hinged channel or fittings. No coupler required. Push-on installation, Orange.
Item #: 1421757
CAT #: FHDEC2X2OR
UPC: 074983911493
Category: Wireway Closure Plates
Company wide:
Panduit

Fitting and Cover, Inside Vertical 90°

2 x 2 Fiber-Duct Fitting. Attaches to channel to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90° angle fitting FOVRA2X2BL or FOVRA4X4BL to change level of straight horizontal runs. Cover included. Light Gray.
Item #: 1298569
CAT #: FIVRA2X2LG
UPC: 074983675722
Category: Wireway Elbows
Company wide:
Panduit

Fitting and Cover, Inside Vertical 90°

4 x 4 Fiber-Duct Fitting. Attaches to channel to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90° angle fitting FOVRA2X2BL or FOVRA4X4BL to change level of straight horizontal runs. Cover included. Light Gray.
Item #: 1230526
CAT #: FIVRA4X4LG
UPC: 074983566273
Category: Wireway Elbows
Company wide:
Panduit

Fitting, Vertical Tee With Hinged Door

Attaches to channel to create a 90° vertical drop from a horizontal run. Accepts FIDT4X4BL, FTR4X4LG, S4X4LG6 or E4X4LG6 directly.
Item #: 1230528
CAT #: FVT4X4LG
UPC: 074983410927
Category: Wireway Elbow-Tee-Cross Fittings
Company wide:
Panduit

Fitting, End Cap, 2" x 2" (50mm x 50mm)

Used for closing off open ends of the hinged channel or fittings. No coupler required. Push-on installation, Black.
Item #: 874994
CAT #: FHDEC2X2BL
UPC: 074983451142
Category: Wireway Closure Plates
Company wide:
Panduit

Spill-Over Junction Fitting with 2x2 Exi

Spill-Over Junction with 2x2 Exit. Assembles onto 4x4, 6x4, 12x4, or 24x4 FiberRunner® Channel, spilling over the side into a 2x2 vertical exit. Requires coupler to attach 2x2 FiberRunner® and fittings to the vertical exit. Mounts directly to existing ins
Item #: 886382
CAT #: FRSPJ2X2OR
UPC: 074983066186
Category: Wireway Box Connectors
Company wide:
Panduit

Fitting, End Cap, 4" x 4" (100mm x 100mm

4 x 4 end cap fitting used for closing off open ends of the channel or fittings. No coupler required. Push-on installation, Light Gray.
Item #: 1230523
CAT #: FEC4X4LG
UPC: 074983565962
Category: Wireway Closure Plates
Company wide:
Panduit

Fitting and Cover, Inside Vertical 90°

4 x 4 Fiber-Duct Fitting. Attaches to channel to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90° angle fitting FOVRA2X2BL or FOVRA4X4BL to change level of straight horizontal runs. Cover included. Yellow.
Item #: 636303
CAT #: FIVRA4X4YL
UPC: 074983702480
Category: Wireway Elbows
Company wide:
Panduit

Fitting and Cover, Outside Vertical 90o

4 x 4 Fiber-Duct Fitting. Attaches to channel to create a 45° downward angle from a straight horizontal run. Used with inside vertical 90° angle fitting FIVRA2X2OR or FIVRA4X4OR to change level of straight horizontal runs. Cover included.
Item #: 1240864
CAT #: FOVRA4X4OR
UPC: 074983566440
Category: Wireway Elbows
Company wide:
Panduit

Fitting, End Cap, 2" x 2" (50mm x 50mm)

2 x 2 end cap fitting used for closing off open ends of the channel or fittings. No coupler required. Push-on installation, Light Gray.
Item #: 659486
CAT #: FEC2X2LG
UPC: 074983675647
Category: Wireway Closure Plates
Company wide:
Panduit

Fitting, Vertical Tee With Hinged Door

Attaches to channel to create a 90° vertical drop from a horizontal run. Accepts FIDT4X4BL, FTR4X4OR, S4X4OR6 or E4X4OR6 directly.
Item #: 1241318
CAT #: FVT4X4OR
UPC: 074983410934
Category: Wireway Elbow-Tee-Cross Fittings
Company wide:
Panduit

Fitting and Cover, Inside Vertical 90°

4 x 4 Fiber-Duct Fitting. Attaches to channel to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90° angle fitting FOVRA2X2BL or FOVRA4X4BL to change level of straight horizontal runs. Cover included. Orange.
Item #: 843406
CAT #: FIVRA4X4OR
UPC: 074983566341
Category: Wireway Elbows
Company wide:
Panduit

Fitting, End Cap, 4" x 4" (100mm x 100mm

4 x 4 end cap fitting used for closing off open ends of the channel or fittings. No coupler required. Push-on installation, Orange.
Item #: 1240862
CAT #: FEC4X4OR
UPC: 074983565979
Category: Wireway Closure Plates
Company wide:
Panduit

Fitting, End Cap, 4" x 4" (100mm x 100mm

4 x 4 end cap fitting used for closing off open ends of the channel or fittings. No coupler required. Push-on installation, Yellow.
Item #: 53376
CAT #: FEC4X4YL
UPC: 074983702442
Category: Wireway Closure Plates
Company wide:
274 Items found