"DE_CS.1626215/A"

Four-Way and Two-Way Mounting Base With Open Leg Design, Natural Nylon 6.6 for Temperatures up to 65 Degrees Celsius (149 F), Length of 28.6mm (1.13 Inches), Width of 28.6mm (1.13 Inches), Height of 8.7mm (0.34 Inches),Self-Adhesive Mounting Method, 100 Pack

Category: Cable Tie Bases

Winged Push Barb Cable Tie Mount, Requires a 0.25” (6.5mm) Hole, Nylon 6.6, Black, Package of 1000

Category: Cable Tie Bases

The metal screw-on mount in natural uses a #10 (M5) screw. It is made of aluminum and used with miniature, intermediate, and standard cable ties. It is designed for indoor and outdoor environments and comes in packages of 100.

Category: Cable Tie Bases

The epoxy applied cable tie mount in black is affixed with EMA epoxy adhesive. It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with miniature, intermediate, and standard c

Category: Cable Tie Bases

The 4-way adhesive backed cable tie mount in black is mounted with rubber adhesive tape. It is 1" long x 1" wide (25.4 x 25.4 mm) and made of weather-resistant ABS plastic. It is used with miniature, intermediate, and standard cable ties. It is designed f

Category: Cable Tie Bases

The winged push barb cable tie mount requires a 0.250" (6.5 mm) hole and is natural color. It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 100.

Category: Cable Tie Bases

The fir tree push mount is black and requires a panel hole diameter of 0.25 to 0.28" (6.3 to 7.1 mm). It is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It comes in packages of 100.

Category: Cable Tie Bases

The cable tie mount in natural color is applied with a #4 (M2.5) screw and is 0.32" (8.1 mm) wide. It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in indoor environments. It comes in packages of 100.

Category: Cable Tie Bases

The extra heavy cable tie mount in black is applied with a #10 (M5) screw. It is made of weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in outdoor environments. It comes in packages of 25.

Category: Cable Tie Bases

THB TC150X150AX-L 4WAY MTG BA

Category: Cable Tie Bases

The low profile cable tie mount in natural color is applied with a #8 (M4) screw. It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with miniature, intermediate, and standard cable ties.

Category: Cable Tie Bases

The stainless steel type 304 tie mount uses 1 hole foldover mounting with a #8 (M4) screw. It comes in packages of 100.

Category: Cable Tie Bases

The epoxy applied cable tie swivel mount in natural is affixed with user supplied EMA epoxy. It is 1.13" long x 1.13" wide (28.7 x 28.7 mm) and has an aluminum base and a nylon mount. It is used with miniature, intermediate, and standard cable ties. It is

Category: Cable Tie Bases

Epoxy Applied Cable Tie Mount, 0.26" x 0.98", Nylon 6.6, Indoor, Used with Miniature, Intermediate, and Standard Cable Ties, Natural, Package of 500

Category: Cable Tie Bases

4-Way Adhesive-Backed Cable Tie Mount, 1" Long x 1" Wide (25.4 x 25.4 mm), ABS Material, Indoor, Black, Package of 500

Category: Cable Tie Bases

The snap-in cable tie mount in ivory is applied with rubber adhesive tape. It is made of ABS for indoor environments. It comes in packages of 100.

Category: Cable Tie Bases

4-Way Adhesive-Backed Cable Tie Mount, 0.50" Long x 0.50" Wide (12.7 x 12.7 mm), Nylon 6.6, Indoor, Used with Miniature, Intermediate, and Standard Cables Ties, White, Package of 1000

Category: Cable Tie Bases

Cable Tie Mount, 4-Way, Adhesive Backing, Nylon, 1" Long x 1" Wide (25.4 x 25.4 mm), Indoor, Used with Miniature, Intermediate, and Standard Cables Ties, Black, Package of 500

Category: Cable Tie Bases

The snap-in cable tie mount in gray is applied with rubber adhesive tape. It is made of ABS for indoor environments. It comes in packages of 100.

Category: Cable Tie Bases

CAT MPNY-750-9-D CABLE TIE 3/

Category: Cable Tie Bases

Low Profile Cable Tie Mount, Attach With a #5 (M3) Screw, Made of Nylon 6.6, For Use With Miniature Cable Ties, Indoor, Color: Black, Package of 1000

Category: Cable Tie Bases

The snap-in cable tie mount in white is applied with rubber adhesive tape. It is made of ABS for indoor environments. It comes in packages of 100.

Category: Cable Tie Bases

Hook & Look Cable Tie Mount, Nylon, Black, Adhesive, Use with HLT, HLS, TTS & UCT Ties, 100/PK

Category: Cable Tie Bases

The low profile flat cable tie mount in gray is applied with rubber adhesive tape. It is 0.13" (3.4 mm) high and can support a maximum flat cable width of 3.44" (87.4 mm). It is made of nylon 6.6, which increases mechanical strength, heat and wear resista

Category: Cable Tie Bases