Cordless Drills & Screwdrivers

Hammer Drill Driver, M18 Fuel, Cordless, RPM: 0 - 550/0 - 2000, BPM: 32000, Torque: 1200 in-lbs, Voltage: 18V, Chuck: 1/2" Single Sleeve - Ratcheting Lock, Weight: 4.5 lbs, Includes: (1) M18 FUEL™ 1/2" Hammer Drill/Driver with ONEKEY™ (Tool Only), (1) Belt Clip, (1) Bit Holder, (1) Side Handle

Category: Cordless Heavy Duty Hammer Drills

Screwdriver, 2.4V, Two Speed, Cordless, RPM: 0 - 200/0 - 400, Torque: 3.5 - 26 in-lbs, Voltage: 2.4V, Chuck: 1/4" Hex, Weight: 0.9 lbs, Includes: (2) 2.4V Batteries, Charger, 1/4" Chuck Attachment, 4 Piece Bit Set, Case & Screwdriver.

Category: 2.4 Volt Cordless Screwdrivers

M18 Cordless Drill/DriverDrill Driver, M18, Cordless, RPM: 0 - 450/0 - 1800, Torque: 650 in-lbs, Voltage: 18V, Chuck: 1/2" Single Sleeve - Ratcheting Lock, Weight: 5.3 lbs, Includes: (2) M18 Lithium Batteries (48-11-1828), M18 Charger (48-59-1801), Side Handle, Carrying Case & Dr

Category: Cordless Heavy Duty Drill Drivers

21.6V Cordless Hammer Drill/DriverHammer Drill Driver, 21.6V, Cordless, RPM: 100 - 400/350 - 1500, BPM: 1800 - 7200/6300 - 27000, Torque: 61 in-lbs, Voltage: 21.6V, Chuck: 1/2" Keyless, Includes: (2) 21.6V Lithium Batteries, 14.4V - 28.8V Charger, Carrying Case & Hammer Drill Driver

Category: Cordless Hammer Drills

MIL 2701-22CT

Category: Cordless Heavy Duty Drill Drivers

Fuel Magnetic Drill, M18, Cordless, RPM: 400/690, Voltage: 18V, Chuck: 1/2" Single Sleeve - Ratcheting Lock, Weight: 5 lbs, Self-Powered Magnet Base Operates Independently of Power Source and Delivers up to 2,000 lbs. of Holding Force, Includes: (1) M18 Batteries, Multi-Voltage Charger, Chuck Key, 3/4" Weldon to 1/2" Chuck Adapter, Lubrication Tank, Safety Strap, 1" Retractable Pilot Pin, Carrying Case & Tool

Category: Cordless Heavy Duty Magnetic Drills

MIL 2788-22 LINEMAN MAG DRILL

Category: Cordless Heavy Duty Magnetic Drills

M18 FUEL™ 1/2" Drill/Driver Kit, 18 Volt, Length: 7.5"

Category: Cordless Heavy Duty Drill Drivers

MIL 2705-20 1/2 FUEL DRL/DRVR

Category: Cordless Heavy Duty Drill Drivers

1/4-20 x 1 L.H. Skt. Hd. Cap ScrewMilwaukee 06-75-3150, 1/4-20 x 1 L.H. Skt. Hd. Cap Screw

Category: Cordless Screwdriver Chuck Kits

M12 Cordless Drill/DriverDrill Driver, M12, Cordless, RPM: 0 - 400/0 - 1500, Torque: 275 in-lbs, Voltage: 12V, Chuck: 3/8", Weight: 2.5 lbs, Includes: (2) M12 Batteries, 30 Minute Charger, Carrying Case & Drill Driver

Category: Cordless Heavy Duty Drill Drivers

Fuel Hammer Drill Driver, M18, Cordless, RPM: 0 - 550/0 - 1850, BPM: 31450, Torque: 725 in-lbs, Voltage: 18V, Chuck: 1/2" Single Sleeve - Ratcheting Lock, Weight: 5 lbs, Includes: (2) M18 XC Batteries, Multi-Voltage Charger, Carrying Case & Tool

Category: Cordless Hammer Drills

Hammer Drill, M28, Cordless, RPM: 0 - 450/0 - 1800, Torque: 750 in-lbs, Voltage: 28V, Chuck: 1/2" Single Sleeve - Ratcheting, Weight: 6.7 lbs, Includes: (2) 28V Lithium Batteries (48-11-2830), 1 Hour Charger (48-59-2819), Side Handle, #2 Phillips Bit, & H

Category: Cordless Heavy Duty Hammer Drills

Hammer Drill Driver, M18 Fuel, Cordless, RPM: 0 - 550/0 - 2000, BPM: 32000, Torque: 1200 in-lbs, Voltage: 18V, Chuck: 1/2" Single Sleeve - Ratcheting Lock, Weight: 4.5 lbs, Includes: (1) M18 FUEL™ 1/2" Hammer Drill/Driver with ONEKEY™

Category: Cordless Heavy Duty Hammer Drills

Right Angle Hole Super Hawg, M18, Cordless, RPM: 0 - 950, Voltage: 18V, Auger Bit: Up To 1-1/4", Self Feed Bits: Up To 2 9/16", Weight: 14 lbs, Includes: Bare Tool.

Category: Cordless Heavy Duty Right Angle Drills

MIL 42-76-0275 CHUCK COLLAR

Category: Cordless Screwdriver Chuck Kits

Fixed Position, Variable Speed BaseFixed Position, Variable Speed Base, For Use On Any Flat Ferrous Material, 1/2inand Thicker, Voltage: 120vac, Drill Travel: 11in, Cord Type: 9ft Fixed, Construction Type: Grounded, Height: 17 1/4in, Width: 4 1/4in, Length: 11in

Category: Cordless Heavy Duty Drill Drivers

DRILL PRESSMIL427021 DRILL PRESS

Category: Cordless Heavy Duty Drill Drivers

DRILL MAG STAND BASE 9Fixed Position, Variable Speed Base, For Use On Any Flat Ferrous Material, 1/2inand Thicker, Voltage: 120vac, Drill Travel: 9in, Cord Type: 9ft Fixed, Construction Type: Grounded, Height: 15in, Width: 4 1/4in, Length: 11in

Category: Cordless Heavy Duty Drill Drivers

Electromagnetic Drill Press, Adjustable, Solid State Electronic Switching, Feedback Speed Control, Line Lock-out Preventstool From Operating Should Voltage Be Restored To An Interrupted Line, Voltage:120vac, Ampere: 12.5amp, Drill Capacity: 1.25in, No Load Speed: 500/250rpm, Cordtype: 9ft Fix

Category: Cordless Heavy Duty Drill Drivers