Boxes & Enclosures

Wall Mount, Type 4X, Enclosure, Solid Door, 29.84 x 23.43 x 12.64 Inch, Gray Fiberglass

Category: Fiberglass Hinged Cover Enclosures

4-Gang, Gang Box Cover, Type: Blank, Drawn, Metallic.

Category: Metallic Gang Box Covers

Enclosure, Hinge Cover, NEMA 3R, 24 x 24 x 10 Inch, Steel with Gray Finish

Category: NEMA 3R Hinge Cover Enclosures

Small Hinged-Cover, Type 1, are used in a wide range of indoor applications. This Small Hinge-Cover Type 1, A8N86 item measures 8.00x8.00x6.00 inches with a material of Steel colored Gray.

Category: Hinge Cover NEMA 1 Junction Boxes

Panel For Enclosure, 48" x 30", Type 3R, 4, 4X, 12/13, Steel, White Powder Coat Finish

Category: Enclosure Back Panels

Electric Heater For Enclosure, 115V, 50/60 Hz, 1300W, 11.5 Amp, Aluminum

Category: Enclosure Heaters

Single Gang Deep Universal Weatherproof Box, 24.8 Cubic Inches, Hub Size 3/4 Inch, Silver, Aluminum, 4 Outlets, Two on Top, and One on Bottom and Back

Category: 1-Gang Metallic Weatherproof Boxes

Concept Enclosures are ideal for machine control applications. This Concept Single-Door Enclosure, CSD161610 item measures 16.00x16.00x10.00 inches with a material of Steel colored Gray.

Category: NEMA 4 Wall Mount Enclosures

Two Door, Wall-Mount, Type 12, Enclosure, Size/Dims: 48.00x48.00x12.00, Material/Finish: Steel/Gray.

Category: NEMA 12 2-Door Wall Mount Enclosures

Square Corner Switch Box with Plaster Ears & Non-Metallic Sheathed Cable Clamps, 3" x 2", 1-Gang, Gangable, , Drawn, Metallic. Depth: 3-1/2". Clamp Type: CL-26. Side Knockouts: (6) 1/2" & (4) 21/32" Priouts . Bottom Knockouts: (1) 1/2". Cubic Inches: 18.0".

Category: Metallic Switch / Outlet Boxes

Panel For Enclosure, 30 x 30 Inch, Steel, Conductive Finish, For Use With Concept Enclosures

Category: Enclosure Back Panels

4-1/4" Diameter, Press-On Saddle Box, Non-Metallic, Depth: 2-5/8". Cubic Inches: 16". Fan Weight: 70 lbs. Fixture Weight: 200 lbs. For use with: 1/2" or 5/8" Drywall.

Category: Non-Metallic Saddle Boxes

Weatherproof Cover, 2-Gang, Single Receptacle (30-50 Amp), Vertical Mount, Die Cast, Diameter: 2.156". Includes: Padlockable Option. Gray.

Category: 2-Gang Metallic Weatherproof Box Covers

Wall Mount Enclosure, NEMA 12/13, Continuous Hinge Cover With Clamps, 16 x 16 x 8 Inch, Steel With Gray Powder Coat Finish

Category: NEMA 12 / 13 Wall Mount Enclosures

1.25 OIL-TIGHT HOLE SEAL

Category: Painted Steel Enclosure Hole Seals

Box Mounting Adapter, Far Side Support Up to 6 Inches, Galvanized Steel

Category: Metallic Box Supports

Cast Iron Lid, Diameter: 8-7/8", Weight: 8 lbs. For use with F08 Curb Valve Box.

Category: Non-Metallic Underground Pull Box Covers

N3R SC ENCLOSURE W/O KO 12X12X4

Category: NEMA 3R Screw Cover Enclosures

Junction Box, NEMA 3/4, Screw Cover, Gasketed, 8 Inch x 8 Inch x 4 Inch, Steel/Gray Powder Coat

Category: NEMA 4 Wall Mount Enclosures

Rectangular Cover, 24 x 36x 3 Inch, Tier 15, Legend: ELECTRIC, Concrete Polymer

Category: Non-Metallic Underground Pull Box Covers

Octagonal Steel Fan/Fixture Support Box, Width: 4 in., Depth: 1-3/4 in., Volume: 17 cu. in., Type of Installation: New Work, Weight Capacity: 70 lbs for Fan and 200 for Fixture, Any Span Between 16" and 24"

Category: Octagon Metallic Ceiling Boxes With Hangers

QLine E, Type 4X, 125x75x74mm, ABS

Category: PVC / Polyester Screw Cover Junction Boxes

Single-gang device plate that will accept up to six (6) ports of communication devices. Fits in any one (1) of the three (3) gangs in the center compartment. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

Junction Box, NEMA 4X, Opaque Screw Cover, 7.6 x 4.45 x 3.11 Inch, Polyester

Category: PVC / Polyester Screw Cover Junction Boxes