Search results

Panduct® type H hinged cover wide slot wiring duct, 2 W x 3 H, 6' length, PVC, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Outside corner fitting for use with LDPH10 and LD2P10 raceway, Electric Ivory, ABS, Length 3.6 in.

Category: 1-Piece Non-Metallic Raceway Elbows

End Cap Fitting, Used To Terminate Or Allow Entry To T-70 Raceway With Conduit Breakouts Of 1/2", Electric Ivory

Category: 1-Piece Non-Metallic Raceway End Fittings

Raceway Cover, T-70/TG70/TWIN-70 Series, Off-White, 8'

Category: 2-Piece Non-Metallic Raceway Covers

Panduct® type MC metric narrow slot wiring duct, 50mm W x 100mm H x 2M length, PVC, international gray.

Category: Standard Density Wire Duct

Panduct® type MC metric narrow slot wiring duct, 100mm W x 75mm H x 2M length, PVC, international gray.

Category: Standard Density Wire Duct

Type TNC slotted wall wiring duct, 99.6mm W x 47.8mm H, 6.6' length, polyphenylene ether + high impact polystyrene (PPE + HIPS), light gray, base and cover packaged together.

Category: Special Purpose Wire Duct

Used wherever additional FiberRunner® Slide Clamps would be helpful. For example, use on 12x4 FiberRunner® QuikLock™ Brackets to accommodate dual runs of 6x4 or 4x4 FiberRunner® Channel.

Category: Mounting Hardware & Brackets

Used to support the 12x4 system from below with new threaded rod. Bracket is secured to threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps. Also can be secured directly to the

Category: Mounting Hardware & Brackets

T-bolts can be used for additional attachment when securing FiberRunner® Channel to mounting brackets. For example, a T-bolt can be inserted thru a 12x4 mounting bracket and positioned within the center rib structure on the underside of 12x4 channel. By t

Category: Mounting Hardware & Brackets

Panduct® snap-clip mounting bracket for use with types G,F,FS and D wiring duct, #8-32 x 1/4 (provided) screw required, 2.00" duct width, spring steel, metallic, 100 pc. package quantity.

Category: Wireway Support Hangers

Panduct® type G wide slot wiring duct, 1.5 W x 1.5 H, 6' length, PVC, adhesive, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

T-45 right angle fitting at 90° flat junction, Electric Ivory.

Category: 2-Piece Non-Metallic Raceway Elbows

T-45 electrical bracket and box for installation of rectangular style electrical outlets, White.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

T-45 raceway base with pre-punched mounting holes, 8 foot length.

Category: 1-Piece Non-Metallic Raceway

Panduct® type G wide slot wiring duct, 4 W x 5 H, 6' length, PVC, intrinsic blue, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® type F narrow slot wiring duct, 1.5 W x 2 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Used to support the 6x4 and 4x4 systems attaching to the top of NetFrame® or NetRack™ Rack. (Contains all necessary mounting hardware.) Bracket accepts 5/8" threaded rod.

Category: Mounting Hardware & Brackets

Coupler fitting for use with LD10, LDPH10, and LD2P10 raceway, International Gray, ABS, Length 1.24 in.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Used to support the 6x4 and 4x4 systems from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or without hinged cover. Bracket is secured to threaded rod

Category: Mounting Hardware & Brackets

Used to support the 6x4 and 4x4 systems attaching to a wall or the front or back of an equipment rack. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

Category: Mounting Hardware & Brackets

Panduct® type FS solid wall wiring duct, 2 W x 2 H, 6' length, PVC, black, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

Panduct® type F narrow slot wiring duct, 1 W x 1.5 H, 6' length, PVC, intrinsic blue, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

The slack spool manager can be mounted in 12x4, 6x4, and 4x4 FiberRunner Channels and in 4x4 Fiber-Duct™ Channel to create an in-channel slack management. It can be deployed in a vertical or horizontal channel run and can withstand a 20 lb. load without p

Category: Storage Loops, Tubing & Tools