Search results

Used to fully enclose 4x4 channel in conjunction with the spill-over junction FRSPJ2X2YL. Cover snaps onto the channel base. Hinged feature allows easy access to add or remove cables.

Category: Drop-Offs, Spillouts & Outlets

The Wyr-Grid® Overhead Cable Tray Bottom Waterfall is designed to maintain a 1.38in (35mm) bend radius while transitioning fiber optic, power, and copper data cables from within the Wyr-Grid® wire rack down into racks in cables. Waterfalls simply snap on

Category: Cable Tray Drop Outs

Entrance end fitting. Conduit breakouts of 1/2", 3/4", 1", 1 1/4" and 1 1/2" for entry from ceiling or wall. Electric Ivory.

Category: 1-Piece Non-Metallic Raceway End Fittings

Entrance end fitting for LD2P10 raceway. Breakouts for 1/2" and 3/4" diameter conduit. Electric Ivory.

Category: 1-Piece Non-Metallic Raceway End Fittings

Double gang faceplate frame accepts up to four 1/2 size module inserts or six 1/3 size module inserts

Category: 2-Gang Raceway Device Brackets & Plates

Panduct® type FS solid wall wiring duct, 2 W x 1 H, 6' length, PVC, light gray, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

Entrance end fitting. Accepts large conduit, (up to 2") in line or at a right angle. Maintains a 40mm bend radius with a removable insert and channel separation. Electric Ivory.

Category: 2-Piece Non-Metallic Raceway End Fittings

Single Gang Snap-on Vertical CommunicatiSnap-on vertical communication faceplate. Holds one 1/2-size PANDUIT® Mini-Com® Insert and two modules. No additional mounting hardware required, White.

Category: 1-Gang Raceway Box Covers & Faceplates

Optional split cover for the outside vertical 45° angle fitting FROV4512X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: Elbows & Bends

Spill-Over Junction with 4x4 Exit. Assembles onto 4x4, 6x4, 12x4, or 24x4 FiberRunner® Channel, spilling over the side into a 4x4 vertical exit. Requires coupler to attach 4x4 FiberRunner® Channel and fittings to the vertical exit. Mounts directly to exis

Category: Drop-Offs, Spillouts & Outlets

End cap fitting for use with LD3 raceway, International Gray, ABS, Length 1.2 in.

Category: 1-Piece Non-Metallic Raceway End Fittings

Optional split hinged cover for the channel FR4X4OR2. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables. Snap-on hinge feature enables positioning of cover at angles between 30° and 90°.

Category: Covers & Retainers

Attaches any 4x4 FiberRunner® Fitting or Channel to the 2x2 Fiber-Duct™ Channel, S2X2YL6 or E2X2YL6 or 2x2 FiberRunner® Channel, HS2X2YL6 or H2X2YL6. Note: Attachment to 2x2 FiberRunner® Channel requires a QuikLock™ Coupler FBC2X2YL. Includes solid cover.

Category: End Caps & Reducers

2 x 2 Fiber-Duct Fitting. Attaches to channel to create a 90° horizontal branch from a straight horizontal run. Cover included. Light Gray.

Category: 2-Piece Non-Metallic Raceway Tee Fittings

Attaches to 12x4 channel and/or fittings to create a 90° horizontal branch with a 6x4 exit from straight horizontal run. Accepts optional split cover FRTSC12W6BL.

Category: Tees, Crosses & Junctions

Attaches to 2x2 channel to create a 90° vertical drop from a horizontal run. Hinged door included. Accepts channel cover in conjunction with channel. Use QuikLock„¢ Coupler FBC2X2GL with HS2X2LG6 or H2X2LG6 channels. Use snap rivets NR2WH-L or bolts F14PN

Category: 1-Piece Non-Metallic Raceway Elbows

LD3 Low Voltage Drop Ceiling / EntranceLow voltage drop ceiling/entrance end fitting for use with LD3 raceway, Electric Ivory, ABS, Length 3.42 in, Width 1.6 in.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Panduct® type F narrow slot wiring duct, 3 W x 1 H, 6' length, PVC, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

2 x 2 Fiber-Duct Fitting. Attaches to channel to create a horizontal four way cross intersection. Cover included. Yellow.

Category: Wireway Cross Fittings

Pre-assembled 12in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Yellow, 1 piece.

Category: Couplers & Joiners

The fitting attaches any 12x4 FiberRunner® Fitting or Channel to any 6x4 FiberRunner® Fitting or Channel. It is black and made of ABS plastic. It accepts split cover FRRF126SCBL.

Category: End Caps & Reducers

Duct cover, 37mm W x 2M length, PVC, white.

Category: Wire Duct Covers

Panduct® type F narrow slot wiring duct, 1.5 W x 1 H, 6' length, PVC, adhesive, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Attaches to 12x4 channel and/or fittings to create a horiztonal four way cross intersection with two 12x4 exits. Accepts optional split cover FRWCSC12BL.

Category: Tees, Crosses & Junctions