Search results

Optional split cover for the outside vertical right angle fitting FROVRA6X4BL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: Elbows & Bends

Panduct® type FS solid wall wiring duct, 2 W x 1.5 H, 6' length, PVC, white, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

Panduct® type FS solid wall wiring duct, 1 W x 4 H, 6' length, PVC, light gray, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

T-45 electrical bracket and box for installation of 106 duplex outlet, White.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Cove raceway base, 8 foot length, used for mounting in the horizontal corner between the ceiling and wall or vertical corner between walls.

Category: Straight Cable Tray Covers

Attaches to 4x4 channel and/or fittings to create a 90° horizontal branch from straight horizontal runs. Accepts optional split cover FRTSC4YL.

Category: Tees, Crosses & Junctions

Panduct® flush cover type D round hole wiring duct, 1 W x 2 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

The fitting attaches any 12x4 FiberRunner® Fitting or Channel to any 6x4 FiberRunner® Fitting or Channel while transitioning to the right. It is black and made of ABS plastic. It accepts split cover FRRF126RSCBL.

Category: End Caps & Reducers

2 x 2 end cap fitting used for closing off open ends of the channel or fittings. No coupler required. Push-on installation, Black.

Category: Wireway Closure Plates

Optional split cover for the outside vertical 45° angle fitting FROV454X4BL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19 mm) opening for easy access to add and removes cables.

Category: Elbows & Bends

Used to route cable into 1.5 (38mm) diameter split corrugated tubing directly through a hole cut in the side wall of the 4x4, 6x4, and 12x4 FiberRunner® Channel or 4x4 Fiber-Duct Channel. Provides 1 (25.4mm) bend radius control at the exit. Includes drill

Category: Drop-Offs, Spillouts & Outlets

Attaches to 12x4 channel and/or fitting to create a 45° upward angle from a straight horizontal run. Used with outside vertical 45° angle fitting FROV4512X4YL to change level of a straight horizontal run. Includes split cover.

Category: Elbows & Bends

The FiberRunner® End Cap Fitting is used in cable management to close off open ends of the channel or fittings. The FiberRunner® End Cap Fitting is a push-on installation and does not require a coupler.

Category: End Caps & Reducers

Panduct® type G wide slot wiring duct, 4 W x 5 H, 6' length, PVC, adhesive, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® type G wide slot wiring duct, 3 W x 2 H, 6' length, PVC, adhesive, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Single Gang Snap-on Horizontal CommunicaSnap-on horizontal communication faceplate. Accepts one 1/2-size PANDUIT® Mini-Com® Insert and two modules. No additional mounting hardware required, Electric Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

Inside corner fitting. Used to join cove raceway at inside corners. Maintains a minimum 1" bend radius of cabling.

Category: 1-Piece Non-Metallic Raceway Elbows

Transition fitting. Used to transition to T-70 raceway, White.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

TG-70 raceway base, 8 foot length. Supplied with pre-punched mounting holes.

Category: 2-Piece Non-Metallic Raceway

OVERHEAD SPLCONNECTOR 24IN -30IN EZ EA

Category: Wire Duct Clips / Retainers

FD CHANNEL SOLIDWALL 4X4 OR 6FT

Category: Straight Channel Cable Tray

Panduct® type G wide slot wiring duct, 2 W x 4 H, 6' length, PVC, adhesive, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Panduct® type G wide slot wiring duct, 3 W x 5 H, 6' length, PVC, adhesive, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Snap-on single gang 106 duplex electrical/communication faceplate. Used to cover one NEMA standard 106 duplex electrical outlet. In communication applications, covers one standard 106 duplex communication module frame, International Gray.

Category: 1-Gang Raceway Box Covers & Faceplates