Search results

Used to carry the cables vertically to the front or the sides of equipment racks throughout the system. Accepts hinged cover HC2OR6. Extra supports required when used in horizontal applications. Use QuikLockâ„¢ Coupler FBC2X2OR to attach channel and/or fitt, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

End cap fitting. Conduit breakouts of 1/2" for entry into raceway channel. White.

Category: 1-Piece Non-Metallic Raceway End Fittings

FD CHANNEL SOLIDWALL NM 2X2 OR 6FT

Category: Straight Channel Cable Tray

The Wyr-Grid® Pathway Section protects cables between the Main Distribution Area and the Equipment Distribution Area. Unlike other pathways, it installs quickly and can be modified easily, optional sidewalls snap on without extra hardware or tools. Splice

Category: Straight Wire Basket

Pre-assembled 4in x 4in QuikLock™ coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Yellow, 1 piece.

Category: Couplers & Joiners

OFR20 Single Channel, Low Voltage 1-piecOne-piece single channel low voltage raceway with adhesive tape backing for data cable routing along top of modular furniture partitions. Available in 8' lengths.

Category: 1-Piece Non-Metallic Raceway Elbows

The black powder coated wall mount bracket is 2.44" (61.98 mm) high, 11.27" (286.26 mm) long, 3.12" (79.25 mm) wide, and 11.27" (286.26 mm) ddep. It is used to support the end of the 12" (304.8 mm) Wyr-Grid® Pathway against a wall. The mounting hardware f

Category: Wire Duct Clips / Retainers

Cutter Blade for 1/2" Threaded Rod

Category: Threaded Rod Installation Tools

Fast-Snap™ Double Gang Power Rated Two-Piece Snap Together Outlet Box. Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD profile raceway. 5.00"L x 6.14"W x 1.62"H (127.1mm x 155.9mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diamet

Category: 2-Gang Raceway Device Boxes

Single gang power rated two-piece snap together outlet box. Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD, LDP, LDPH, LDS profile raceways. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or 1"

Category: 1-Gang Raceway Device Boxes

Double gang two-piece screw together divided outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard double gang faceplate. For use with Pan-Way® T-45 or LD profile raceway. 5.05"L x 5.05"W x 1.62"H (128.2mm x 128.2mm x 41.1mm). Breakout

Category: 2-Gang Raceway Device Boxes

Inside corner fitting. Used to join sections of Twin-70 raceway at inside corners. Electric Ivory.

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Inside corner fitting – non-adjustable. Used to join sections of TG raceway at inside corners. Electric Ivory

Category: 2-Piece Non-Metallic Raceway Elbows

Used to fully enclose 6x4 channel in conjunction with the Spill-Over Junction FRSPJ4X4BYL. Cover snaps onto the channel base. Hinged feature allows easy access to add or remove cables.

Category: Drop-Offs, Spillouts & Outlets

FIBERRUNNER COVER 6X4 OR 6FT

Category: Covers & Retainers

Optional split cover for the horizontal right angle fitting FRRA4X4BL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19 mm) opening for easy access to add or remove cables.

Category: Elbows & Bends

T-45 tee fitting insert.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Tee fitting with divided insert to maintain separation of power and data cabling. For use with LD2P10 raceway, Electric Ivory.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Optional split cover for the horizontal tee fitting FRT6X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: Tees, Crosses & Junctions

Attaches to channel to create a 90° vertical drop from a horizontal run. Accepts FIDT4X4BL, FTR4X4YL, S4X4YL6 or E4X4YL6 directly.

Category: Wireway Elbow-Tee-Cross Fittings

Optional split cover for the horizontal tee fitting FRT12X4BL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: Tees, Crosses & Junctions

Installation tool for use with type LD3 raceway.

Category: 2-Piece Non-Metallic Raceway

Reducer fitting for LD raceway from size 10 to size 3. For use with LD3 and LD10 raceway. For in-line terminations, use with CF10

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Panduct® type G wide slot wiring duct, 2.5 W x 3 H, 6' length, PVC, adhesive, light gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct